Grandinė OREGON 40cm 16" 3/8 1,3mm 56 grandys Half Chisel VXL

Trumpai apie prekę

Prekė: Grandinė OREGON 40cm 16" 3/8 1,3mm 56 grandys Half Chisel VXL. Kategorija: Grandininiai pjūklų grandinės.

• Gamintojas: Oregon
• Modelis: 91VXL056E
• Skersmuo: 1.3 mm
• Ilgis: 40 m

PARAMETERS:

• Status - new
• Manufacturer - OREGON (original part)
• Chain pitch - 3/8
• Groove width - 1,3 mm
• Number of cells - 56
• Type: Half chisel
• Symbol OREGON - 91VXL
• CHAIN FITS 16" (40CM) LONG GUIDE, ALTHOUGH YOU NEED TO MAKE SURE THAT THE GUIDE SUPPORTS 56 LINKS
• To sharpen this chain you need file 4mm

The 91VXL series saw chain is an extremely efficient chain with a pitch of 3/8 inch and a thickness of 1,3 mm. It is ideal for professional operators of chainsaws dealing with surgery and tree trimming.

• For professional operators of chainsaws dealing with surgery and tree trimming.
• Recommended by Arborists for Arborists.
• Improved sharpening geometry gives better results and increased cutting efficiency.
• Gently inclined depth limiters in cutting cells reduce reflection.
• Lubrilink™ type connecting cells help to hold the oil where it is needed
• Lubriwell™ lubrication holes in all guide links of the cutting chain help distribute the oil along the entire length of the guide groove.
• Ideally suited for professional low power saws.
• Lightweight chain with reduced bounce.
• The service life of this saw chain is 33% longer than traditional chain

The drive link of a saw chain is the link that enters and moves in the groove of the guide bar.

Although the cutting chain may correspond to the model of your saw, its length depends on the length of the guide.

In order to choose the right length chain:

NECESSARILY count the number of guide cells

This product is compatible with 3/8" graduation (low profile)

What is the scale of the cutting system?

A chain pitch is the distance between the axes of the first and third rivets (anywhere in the chain) divided by two. The pitch in the entire cutting system (chain, guide, clutch drum) must be the same.

For this product - the pitch is 3/8 inch (the distance between three rivets is approx. 19 mm).

Important! In the case of used cutting chains, this distance may increase due to the wear of the chain and its tensile properties.

3/8 inch (low profile) is a common pitch used in small, light chainsaws, exhaust or electric.

Chain with cutting link type: "Half-cut"

Cutting chains with a "half-length" link have cutting teeth with a rounded profile that allow efficient cutting of even harder soiled wood.

The "half-length" chains are perfect for both professionals and occasional chainsaw users. Due to the shape of the cell, they are less exposed to dulling - they require less frequent sharpening and maintenance.

Fast cutting of hardwood

Does not require as frequent sharpening as "full chisel" chains

Works well on surfaces soiled with sand or earth.

Used and recommended by professionals and less advanced users.

Fits, among others, to:

• Husqvarna: 36, 136, 41, 137, 141, 142, 338XPT, T425, 23, E16, E316, E317, E321, 33, 335XPT, 333, 334, 1600, 338, 1400, 315, 316, 318, 243, 320, 321, 16, 135MarkII, 130,
• Oleo-Mac: GS35, GS350, GS370, 931, 932, 936,
• Solo: 613, 614, 630, 633, 635, 636, 637, 640, 642,
• Jonsered: 2033TH, 2118EL, 2115EL, 2035, 2116, 2115, 2135, 2121, 2117, 2137, 2138, 2139,
• Dolmar: PS330, PS33, PS3300TH, PS34, PS340, PS341, PS344, PS3410, PS350, PS390, PS400, PS401, PS41, PS45, ES3, ES6, ES30, ES37, ES40, ES41, ES140, ES151, ES152, ES152A, ES153, ES160, ES161, ES162, ES162A, ES163, ES172, ES172A, ES173, ES183, ES2035, ES2040, 100, 101, 102, 103, 104, 105, 106, 108, 275, 285, PS330TH, CS2040,
• Partner: 360, 330, 335, 340, 345, 350, 351, 370, 385, P390, 395, P420, 391, P842,
• Zenoah: G2500T, GZ3300, GZ3200T, G3200T, GZ3500T, G3800, G3800AVS, G2500PS, G2000T, GT250, GT310, G300T, G310TS, G320AVS, G250TS, G3100, G3200, G3300, G3800AV, G3800AV, G3800AV
• Homelite: HCS3335, HCS4041CA, 20AV, 23AV, 27, 3300, 3350, 3550, 3800, 3335, 4500, 4550, PS33, RANGER, CS40, TIMBERMAN, UT10901, UT10926, UT10974,
• Alpina: ELECTRIC, E120, E130, ES182, ES202, E150, KS1400B, KS1500B, A10E, A14E, 352, 382, 330, 380, EURO35, EURO40, 432, 438, EURO45, P34, PR350, P371,
• Echo: CS2600ES, CS260TES, CS2700ES, CS3500ES, CS350WES, CS351WES,
• FloraBest: FHE550A1, FKS2000, FKS2200,
• McCulloch: MS1215, MS1415, MS1425, MS1435, MS1630, MS1640, MS1645, MS1845J, MS1834N, MS1635AV,
• Ryobi: PCN3335, APR02,
• Shindaiwa: 285S, 300S, 305S, 352S, 360,
• NAC: GY9304, YT4380, YT4645, SF7J112, CE22-OS-G, CE20-O-S, CE20-NS-H, PE2000

And also for any guide that has a 3/8' pitch groove width of 1,3 and supports 56 links

Specifications