{"product_id":"filtru-kaseciu-rinkinys-atlas-filtri-trio-10-sanic-10-cf-la-bx","title":"Filtrų kasečių rinkinys Atlas Filtri Trio 10\" Sanic 10 + CF + LA BX","description":"\u003ch2\u003eTrumpai apie prekę\u003c\/h2\u003e\u003cp\u003ePrekė: Filtrų kasečių rinkinys Atlas Filtri Trio 10\" Sanic 10 + CF + LA BX. Kategorija: Vandens filtrai ir minkštikliai.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGamintojas:\u003c\/strong\u003e Atlas Filtri\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModelis:\u003c\/strong\u003e Zestaw DP TRIO Sanic 10\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTalpa:\u003c\/strong\u003e 3 l\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAtlas Filtri FA 10’’ Sanic BX String Cartridge – 10 microns\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eThe Atlas Filtri FA 10’’ Sanic BX\u003c\/b\u003e string cartridge with a micron size of 10 microns is used to remove mechanical impurities from the water, e.g. sand, rust, sealing particles. In the offered version, the string cartridge is made in a bacteriostatic version, limiting the development of microorganisms on the surface of the cartridge.\u003c\/p\u003e\u003cp\u003eThe use of bacteriostatic technology using the known properties of silver ions leads to a number of \u003cb\u003ebenefits during operation:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003elimits the growth of bacteria and viruses\u003c\/b\u003e on the surface of the cartridge, so that there is no deterioration of sanitary conditions during the operation of the cartridge,\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eprevents pressure loss\u003c\/b\u003e, which are consequences of the growth of the biological membrane on the filter surface of the cartridge\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003ePurpose:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe 10 μm micron string insert is ideal as:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003epre-filter at the entrance of the installation to the building,\u003c\/li\u003e\n\u003cli\u003eprotective filter against water softeners\u003c\/li\u003e\n\u003cli\u003ecleaning filter located behind water treatment plants\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eInsert parameters Atlas Filtri FA 10 Sanic BX:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeight: 250 mm\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 61 mm\u003c\/li\u003e\n\u003cli\u003eInner diameter: 30 mm\u003c\/li\u003e\n\u003cli\u003erecommended filtration speed: 2000 l\/h\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 4-45°C\u003c\/li\u003e\n\u003cli\u003eaverage service life: 6 months\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSoftener cartridge Atlas Filtri 10’’ QA CF BX\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eHigh quality, Italian cartridge Atlas Filtri 10’’ QA CF BX with ion exchange resin \u003c\/b\u003e designed for water softening.\u003c\/p\u003e\u003cp\u003eThe cartridge is made in the form of a transparent housing made of non-toxic polystyrene, filled with high-quality softening ion exchange resin. The housing is finished with double EPDM O-rings.\u003c\/p\u003e\u003cp\u003eThe softener cartridge is designed for technical and home applications.\u003c\/p\u003e\u003cp\u003eThe use of \u003cb\u003ehigh-quality components\u003c\/b\u003e translates into high strength of the cartridge and ensures that the cartridge maintains the expected effectiveness of water softening over time.\u003c\/p\u003e\u003cp\u003eThe offered cartridge has been designed in such a way that the incoming water has the longest possible contact time with the softening bed, which \u003cb\u003eprovides an appropriate degree of softening\u003c\/b\u003e. Water into the cartridge is introduced into the inlet holes only at the bottom of the cartridge and flows through the full width of the cartridge through the entire volume of the softening resin, maintaining the appropriate contact time.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eParameters of the cartridge Atlas Filtri 10’’ QA CF BX:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eheight of the body without collar (pronounced. A): 240 mm\u003c\/li\u003e\n\u003cli\u003etotal height of the body with flange: 253 mm\u003c\/li\u003e\n\u003cli\u003eouter diameter of the body (pron. B): 70 mm\u003c\/li\u003e\n\u003cli\u003eouter diameter of flange with O-rings: 44 mm\u003c\/li\u003e\n\u003cli\u003einner diameter of flange with o-rings (pron. C): 32 mm\u003c\/li\u003e\n\u003cli\u003erecommended filtration speed: 50 l\/h\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 4 - 45°C\u003c\/li\u003e\n\u003cli\u003emaximum chlorine content: 0,1 ppm\u003c\/li\u003e\n\u003cli\u003emaximum iron content in water: 0,1 ppm\u003c\/li\u003e\n\u003cli\u003efilling type: ion exchange resin\u003c\/li\u003e\n\u003cli\u003eservice life 325 l with water hardness 100 ppm CaCO3\u003c\/li\u003e\n\u003cli\u003eservice life 162 l with water hardness 200 ppm CaCO3\u003c\/li\u003e\n\u003cli\u003eservice life 121 l with water hardness 300 ppm CaCO3\u003c\/li\u003e\n\u003cli\u003eservice life 81 l with water hardness 400 ppm CaCO3\u003c\/li\u003e\n\u003cli\u003eservice life 65 l with water hardness 500 ppm CaCO3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eActivated carbon cartridge Atlas Filtri LA 10’’ BX\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eHigh quality, Italian activated carbon cartridge Atlas Filtri LA 10’’ BX \u003c\/b\u003e designed to remove from the water compounds that worsen its organoleptic parameters (m.in. taste, smell and colour), chlorine, organic compounds, and heavy metals.\u003c\/p\u003e\u003cp\u003eThe carbon cartridge is designed for technical and domestic applications.\u003c\/p\u003e\u003cp\u003eThe cartridge is made in the form of a transparent housing made of non-toxic polystyrene, filled with high-quality granulated activated carbon from coconut shells (GAC). The construction is completed with a double O-ring flange with EPDM.\u003c\/p\u003e\u003cp\u003eThe use of \u003cb\u003ehigh-quality components\u003c\/b\u003e translates into high durability of the cartridge and ensures that the cartridge maintains the expected efficiency of water purification over time.\u003c\/p\u003e\u003cp\u003eThe offered cartridge has been designed in such a way that the incoming water has the longest possible contact time with activated carbon, which \u003cb\u003eprovides an adequate degree of its purification\u003c\/b\u003e. Water into the cartridge is introduced through the inlet holes only at the bottom of the cartridge and flows through the entire volume of activated carbon, maintaining an appropriate contact time.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eParameters of the cartridge Atlas Filtri LA 10’’ BX:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eheight of the body without collar (pronounced. A): 240 mm\u003c\/li\u003e\n\u003cli\u003etotal height of the body with flange: 253 mm\u003c\/li\u003e\n\u003cli\u003eouter diameter of the body (pron. B): 70 mm\u003c\/li\u003e\n\u003cli\u003eouter diameter of flange with O-rings: 44 mm\u003c\/li\u003e\n\u003cli\u003einner diameter of flange with o-rings (pron. C): 32 mm\u003c\/li\u003e\n\u003cli\u003erecommended filtration speed: 500 l\/h\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 4 - 45°C\u003c\/li\u003e\n\u003cli\u003eaverage service life: 3 months (depending on the composition of the water)\u003c\/li\u003e\n\u003cli\u003efilling type: granulated activated carbon from coconut shells\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA feature that distinguishes the Atlas Filtri 10\" BX series cartridges from other cartridges is the possession of two o-ring seals in the upper flange, which perfectly fit into the Atlas Filtri BX 10’’ filter body. This makes replacing the cartridge much easier than in standard filter housings and ensures the correct position of the cartridge in the filter body, thanks to which we can be sure that the water is properly softened (no bridging of the cartridge by incoming water).\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNOTE!!!\u003c\/b\u003e These Atlas Filtri cartridges in BX version (with double seal) \u003cb\u003eare dedicated exclusively to Atlas Filtri filters from the BX\u003c\/b\u003e series. They will not fit other in-line bodies available on the market for which flat-ended inserts are intended (without a vertical flange with gaskets).\u003c\/p\u003e\u003cp\u003e\u003cb\u003eOPERATING NOTES:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ecorrect order of installation of cartridges\u003c\/b\u003e according to the direction of water flow: string cartridge \/ softener cartridge \/ carbon cartridge. Another order of cartridges may affect the improper operation of the m.in filtering system. water pressure drop, improper degree of water purification, pollution of istalation\u003c\/li\u003e\n\u003cli\u003eIn order to maintain the correct water purification efficiency, the recommended filtration rate given in the description of each cartridge should be maintained. Working with a flow exceeding the values recommended by the manufacturer can lead to lower filtration efficiency, shorten the life of the cartridge and deterioration of the quality of treated water. In extreme cases, excessive flow of \u003cb\u003ecan cause damage to the filter structure of the cartridge\u003c\/b\u003e, resulting in the release of filter material particles into the water system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGroup\u003c\/th\u003e\n\u003cth\u003eName\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003enew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eInvoice\u003c\/td\u003e\n\u003ctd\u003eWith VAT invoice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAtlas Filtri\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eKind\u003c\/td\u003e\n\u003ctd\u003eset\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e3 l\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eManufacturer code\u003c\/td\u003e\n\u003ctd\u003eTRIOSANIC10PACK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eEAN (GTIN)\u003c\/td\u003e\n\u003ctd\u003e5904844980939\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eZestaw DP TRIO Sanic 10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"inzynieriawody","offers":[{"title":"Default Title","offer_id":46042752286780,"sku":"18643225155","price":66.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/2161\/6188\/files\/Set-of-filter-cartridges-Atlas-Filtri-Trio-10-Sanic-10-CF-LA-BX.jpg?v=1787297396","url":"https:\/\/market365.lt\/lv\/products\/filtru-kaseciu-rinkinys-atlas-filtri-trio-10-sanic-10-cf-la-bx","provider":"Market365","version":"1.0","type":"link"}