Elektrinis konvektorius 500W su termostatu, LED ekranu, WiFi, baltas

Trumpai apie prekę

Prekė: Elektrinis konvektorius 500W su termostatu, LED ekranu, WiFi, baltas. Kategorija: Konvektoriniai radiatoriai.

• Gamintojas: Tesy
• Modelis: CN031EI0500CL
• Plotis: 437 mm
• Aukštis: 450 mm
• Spalva: white

FEATURES OF THE HEATER:

✅Power 500W.

✅Optimal convection - up to 25% faster room heating.

✅ Precise thermoregulator with an accuracy of 0.1°C.

✅To an area of 4-6m2.

✅Electronic thermoregulator 10-30°C

✅Saving up to 21% energy

✅Calibration of the thermostat to achieve the desired comfort - temperature correction ± 4°С

✅Block thermostat settings - ideal protection e.g. in front of the children.

✅Built-in IEEE 802.11 b/g/n Wi-Fi module for internet control.

✅Protection against overheating.

✅Freezing protection, set at 5°C, with on/off option.

✅Delayed start function – up to 96 hours.

✅Weekly 24h/7d programmer with 30-minute jump,

✅Open window/door function.

✅TIMELESS DESIGN!

The design of the heater makes it suitable for any room.

The radiator is ideal as a heating system because the radiator uses the effect of rising warm air, which quickly spreads in the heated room.

It can be used as a single heating device used for heating, e.g. hostels or a central heating assistance system, especially where the air temperature drops rapidly.

99% of the energy consumed by it is converted into heat of the heated room.

A clear LED display showing the selected and current temperature in the room will make it easier for you to work with the heater.

Additionally, the heater has a built-in WIFI function, so you can control the heater from anywhere in your home.

✅HEATER MODES:

1. "Comfort" mode - with on/off option. It allows the user to set the desired temperature when he is at home. When this feature is enabled, the devices will maintain the same room temperature during each use. By default, the temperature is set to 23°C.

2. "Eco" mode – with the option to turn on/off. Allows the user to set the desired temperature when they are away from home. When the device is set and this function is turned on, the devices will maintain the same room temperature during each use. The temperature is set to 18 °C by default. The user can also set the time after which the device will go into “Comfort” mode. Thermostat/automation function that allows the user to manually/manually set or change the operating parameters of the device according to their preferences.

3. "Sleep" mode with on/off option - two hours after activation, the convector will lower the set temperature by 3°C compared to the temperature set in "Comfort" mode. The user can set the working time in the "Sleep" mode, after which the device will go into the "Comfort" mode. The default setting is 6 hours.

4. The "Delayed start" function allows the user to set the time after which the convector will turn on and start heating.

5. Function "Against freezing" . If the room temperature drops below 5 degrees and the convector is turned off (in stand-by mode), the heater will turn on automatically to prevent freezing so that the temperature becomes above 5 degrees. Then it goes into off mode again.

5. open window/door function - The device is equipped with integrated electronic equipment that automatically turns off the heat output if it detects a sharp drop in temperature in the room as a result of an open window or door. If the room temperature drops by more than 5°C, the convector will turn itself off. If an open window is detected within 15 minutes, the device turns off. When the room temperature rises by at least 0,5°C and the difference between it and the set value is below 5°C, the convector will turn on with the previously set settings. If the temperature does not rise within more than 60 minutes, the convector will enter standby mode. This function can be disabled manually.

✅HEAT ECO HEATERS THIS IS IT!

HeatEco plate electric convectors with internet control achieve 39% with a maximum of 40% seasonal energy efficiency. This is possible thanks to the electric thermoregulator and the combined ERP functions (“smart” functions), which save electricity and facilitate the lives of users. In particular, these are: “Open window/door” function, “Adaptive start adjustment” function, the ability to calibrate the temperature ±4°С, control via the Internet, 24/7 weekly programmer.

⭐HEAT ECO IS A PRODUCT OF THE RENOWNED BRAND TESY, RELIABLE AND RECOMMENDABLE - CHECK IT YOURSELF! ⭐

Specifications