Dujinis keltuvas 3,5 t TP0042TECHWAR

Trumpai apie prekę

Prekė: Dujinis keltuvas 3,5 t TP0042TECHWAR. Kategorija: Pneumatiniai keltuvai.

• Gamintojas: Techwar
• Modelis: TP0042

PNEUMATIC DUCT LIFT 3500 KG WITH TRAVERSE 2500KG

TP0042

POLISH PRODUCT!!!

MANUFACTURER TECHWAR

Pneumatic duct levers are designed for partial lifting of the car during diagnostics and maintenance and repair work. The lever is used to lift the wheels of the car front or rear axle.

NEW!!!

Our pneumatic duct lift is the only jack on the market with forced return to the lowest position.

Solid welded powder coated construction. The lift is equipped with metal guide sleeves inside the bellows, which stabilize the lift during operation. At any height, the cushion is perfectly rigid, ensuring stable lifting and maximum safety of operation. The use of rubber bellows, used in the production of TIR truck semi-trailers, guarantees the highest level of safety. The bellows can withstand a pressure of 10T and a maximum pressure of 17 bar.

High quality pneumatics ensures reliable use of the lift for many years. Precise and solid construction of the structure, translates not only into a longer life of the device, but also guarantees better comfort of work.

Powder coated product.

TECHNICAL DATA:

• Model: TP0042
• Maximum lifting capacity: 3500kg
• Lifting height: 370 mm
• Minimum height from floor level 100mm maximum after removing supports approx. 500 mm
• Working pressure: 0,8 Mpa (8 bar)
• Diameter of bellows: 340 mm
• Hammer stiffening: Metal telescope
• Trolley width along the channel: 470 mm
• Diameter of driving wheels: 45mm / according to order
• Length of wheels: from 30mm / according to order
• Choo weight: 65kg
• Standard equipment: TP0003 – traverse, cross beam with unscrewable and extendable supports.
• EC/CE declaration of conformity

Standard equipment of the lift:

TP0003 – traverse, transverse beam, allowing stable support when lifting the entire front or rear of the vehicle. The traverse is designed for lifting vehicles through extendable arms of 50cm on each side, and twisted support feet up to 10cm, equipped with rubber overlays that allow optimal positioning of the support under the structural elements of the vehicle.

Adjusting the lift to the channel

Channel lifters are made to order.

1. The overall width of the trolley must take into account not only the dimension between the walls of the channel, but possible obstacles, in the form of lamps, electrical installation, etc.
2. The diameter and width of the wheels are adjusted to the edges of the channel. In the case of edges made of catheter, the wheels are conical, of appropriate diameter and width.

Service

We have all the parts for our lifts.

The lifter is made to order after specifying the type and width of the channel, and guiding for rollers (angler, c-profile, etc.).

When placing an order, please provide the channel type and detailed channel dimensions.

Specifications