Piegādes termiņš katrai precei ir norādīts pie cenas bloka.
Piegāde visā Lietuvā: bez maksas.
Trumpai apie prekę
Prekė: Diagnostinė OBD2 TCS sąsaja Multidiag Pro+ BT 12/24V. Kategorija: Diagnostiniai testeriai ir sąsajos.
- Gamintojas: Tradebit
- Modelis: Interfejs Diagnostyczny Tester
➡ Your car’s Electronics Command Center:
The TCS Multidiag Pro+ BT Professional Diagnostic Tester is an advanced OBD2 interface that connects your car's electronics to your computer or laptop. The device is used to comprehensively verify the technical condition of the vehicle, allowing for quick and accurate detection of defects in the home or professional workshop.
With it, you can easily read and delete errors from all modules, reset service inspections (e.g. oil) and you will see the engine operating parameters in real time. Thanks to the built-in Bluetooth module, all diagnostics are fully wireless, ensuring maximum convenience.
➡ Key features:
- ✅ Universal power supply 12V/24V – full service for passenger cars, vans and trucks.
- ✅ Intelligent System Scanning (ISS) – automatic and instant testing of all vehicle controllers at the same time.
- ✅ System Identification (ISI) – the system itself takes care of the selection of the right parameters of the connection with the car.
- ✅ Flight Recorder – the ability to save live operating parameters to a MicroSD card directly while driving.
- ✅ OBD2 plug with LED – built-in flashlight, which makes it easy to locate the diagnostic socket in dark corners of the vehicle.
➡ Why it is worth:
- Saving time and money – you diagnose the car yourself and forget about paying for each connection to the computer at the mechanic.
- Full control over the repair – you quickly check what the "Check Engine" control means and go to the workshop with ready-made knowledge, avoiding incurring unnecessary costs.
- Convenience without tangled cables – a stable Bluetooth module allows for comfortable work from inside the car or from under the raised mask.
- Safety of your electronics – an intelligent battery voltage monitoring system automatically alerts you with sound, protecting your car’s installation.
- Tool for years – wide compatibility means that the device will handle both your current car and subsequent cars in the future.
☑ List of compatible vehicle brands:
Passenger cars:
- Volkswagen
- Audi
- Opel
- Nissan
- Benz
- Land Rover
- Volvo
- Jaguar
- BMW
- Seat
- Toyota
- Porsche
- Mazda
Trucks:
- Allison
- Fiat
- Kia
- Opel
- Peugeot
- Toyota
- DAF
- Skoda
- Chevrolet
- Ford
- Man
- Mitsubish
- Renault
- Volkswagen
- Iveco
- Citroen
- Hyundai
- Nissan
- Scania
- Volvo Bus
- Mazda
- Dacia
- Isuzu
- Mercedes
- Seat
- Volvo
⚙ Specification:
Hardware parameters and connectivity:
- Processor: 32-bit ARM Cortex microcontroller
- Relays: Japanese NEC/Omron (Dual PCB version on green board V3.0)
- Connectivity: Bluetooth (range up to 15 meters) and USB (shielded cable included)
- Operating voltage: 12V/24V (automatic detection with overvoltage protection)
- Notifications: Sound (beeper) and light (multicolor LED Light Ring on housing)
- Memory Slot: MicroSD (supports cards up to 32GB for Flight Recorder)
- Vehicle connector: Standard OBD2 J1962 with built-in LED flashlight in plug
- OS compatibility: Windows XP, Vista, 7, 8, 8.1, 10, 11 (32 and 64-bit versions)
- The software of the in Polish
Supported communication protocols:
- CAN-BUS (ISO 15765-4)
- KWP2000 (ISO 14230-4)
- ISO 9141-2
- SAE J1850 PWM / VPW
- J2411 (Single Wire CAN)
- ISO 11898-3 (Fault Tolerant CAN)
- Support for double K and L lines
Supported electronic circuits and modules:
- Engine (Gasoline, Diesel, Hybrid, LPG/CNG)
- Brake systems (ABS, ESP, ASR, EBD)
- Safety systems (Airbag, SRS, side curtains)
- Air conditioning and heating (Climatronic, Webasto)
- Dashboard (Indicators, Indicator Set, HUD)
- Gearboxes (Automatic, DSG, Powershift, CVT)
- Comfort module (BSI, BCM, central lock, alarm)
- Power steering systems (EPS, power steering)
- Suspension (Pneumatic, Adaptive)
- Assistance systems (PDC parking sensors, cameras, ACC active cruise control)
- Multimedia systems (Radio, navigation, sound system)
- Pressure monitoring (TPMS)
- Immobilizer and Keyless Systems
Full list of service functions and adaptations:
- Read and delete errors (DTC) from all modules
- Preview of live data in the form of text and charts
- Deleting service, oil, temporary and kilometre inspections
- Forced firing, regeneration and adaptation of particulate filter (DPF/FAP)
- Reverse Electric Parking Brake Calipers (EPB/SBC) for Pad Replacement
- Common Rail injector coding and programming (IMA codes)
- Adaptation of throttle, EGR valve and flaps in the collector
- Steering Wheel Angle Sensor Calibration (SAS)
- Registration and coding of a new battery (Start-Stop / BMS systems)
- Venting of ABS pump and brake system
- Encoding keys and remote controls (in selected brands)
- Reset of learned parameters (self-adaptation) of the engine controller
- Execution tests (starting fans, pumps, injectors, valves)
❇ Set includes:
- 1 x TCS Multidiag Pro+ BT diagnostic interface
- 1 x OBD2 main connection cable with LED
- 1 x USB cable to connect to PC
- 1 x DVD with drivers and installation software
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With VAT invoice |
| Parametry | Brand | Tradebit |
| Parametry | Product weight with unit packaging | 0.2 kg |
| Parametry | EAN (GTIN) | 5905982628707 |
| Parametry | Manufacturer code | Interfejs Diagnostyczny Tester |
| Parametry | Batteries included | yes |
| Parametry | Bluetooth version | Bluetooth 5.0 |






