Automobilių domkratai CAR BUNNIES WORKSHOP, 3 t, 285–415 mm, 2 vnt.

Trumpai apie prekę

Prekė: Automobilių domkratai CAR BUNNIES WORKSHOP, 3 t, 285–415 mm, 2 vnt.. Kategorija: Darbo ožiai.

• Gamintojas: Wuber
• Modelis: W22047 KOBYŁKI SAMOCHODOWE WARSZTATOWE 3 TONY

► 3 TONS LIFTING CAPACITY | ► DOUBLE LOCK | ► THICK SHEET METAL | ► LIFTING RANGE 285 - 415 MM | ► REINFORCED BASE | ► RUBBER OVERLAYS | ► CAST IRON COLUMN | ► HAVE A DECLARATION OF CONFORMITY CE

⚙ Technical specification:

Producer: WUBER

Lifting capacity: 3000 kg

Minimum height: 285 mm

Maximum height: 415 mm

Base dimensions: 195 x 205 mm

Number of pieces included: 2

Number of adjustment steps: 9

Additional lock: Yes (12 mm pin)

Rubber Overlays: Yes

Weight: 5,24 kg

⭐ Robust and reliable

✅ Lifting capacity 3 tons ► You get a safe load capacity when working with passenger cars and city SUVs.

✅ Stable base ► The lower transverse profiles connect the feet of the mare, so that the legs do not run over under the influence of weight.

✅ Wide base 195 x 205 mm ► The weight is distributed over a larger area, making the mare more stable.

✅ Lifting range 285 - 415mm ► 9 degrees of adjustment allows you to precisely adjust the height of the support under the ground clearance of a specific car.

✅ Equally cast iron teeth ► Provide secure locking of the support at every level of adjustment.

✅ Independent Pin-Safe ► lock 12-millimeter steel pin passes through the housing. The stem does not fall even after accidentally hitting the main ratchet lever. This directly increases the safety of working under the car.

⚡ Investing in quality that pays off!

✅ Rubber overlays ► The saddle will not scratch the chassis of your car.

✅ Thick sheet ► The walls of the mare are up to 7 mm thick.

✅ More weight = More stability ► The set weighs 5,24 kg.

✅ Savings on service ► You support the car in the garage and change pads or oil yourself. Money for labor stays in your pocket.

✅ Welded bottom construction ► Factory thick welds connect the legs. The design will withstand long operation.

⭐ BET ON PROVEN WUBER ⭐

⭐ Why should you choose our mare?

✔ Our mare have thick walls and stiffening cross profiles of the base.

As a result, they offer the highest stability in their price range.

► Solid welded construction at the base

► Application of cast iron gear bar

► Brand equipment with an established position on the market

✅ UNBEATABLE IN ITS PRICE RANGE!

⚡ Quality matters, not compromises

Compared to the typical workshop mare available on the market, ours stand out in every respect

✔ The base has additional profiles connecting the feet. Cheap mare bends outwards, while our crossbar system maintains factory geometry under a load of 3 tons.

✔ The thickness of the saddle wall is up to 7 mm. Thicker casting of material prevents cracks.

✔ The set weighs more than 5 kilograms. The weight of the supporting structure results directly from the amount of steel used, which guarantees higher resistance of the mare.

✔ 12 mm thick metal locking pin. It protects the selected level of lifting and eliminates the risk of uncontrolled leaving the car.

⭐ Thick sheet metal and cast iron column

The mare base their strength on the thick walls of the base and a massive central column cast from hard cast iron.

Their advantages are:

✔ Load resistance up to 3T ► The stand supports the vehicle safely and rigidly.

✔ Life ► Cast iron gear column exhibits high friction resistance. The ratchet mechanism does not wipe and locks securely for years.

✔ Maximum stability ► The 2,5 mm thick base sheet distributes the weight over a wide surface area of 195 x 205 mm. This reduces the point pressure on the garage floor.

⚡ Additional lock = safe operation

✔ In addition to the classic ratchet, the arm blocks an additional pin with a thickness of 12 mm.

✔ You slide the pin into the through hole in the housing. The stem of the bubble stops on the pin, even if you accidentally press the main release lever.

✔ This prevents you from accidentally leaving the vehicle and guarantees complete peace of mind when working under the car.

⚡ Rubber overlays - take care of the chassis!

✔ Removable rubber cover on the saddle protects the thresholds and stringers of the car from the hard surface of the mare.

Thanks to this you lift the vehicle safely, without worrying about scratching the paint and anti-corrosion layer.

⚡ You will do this work yourself, safely and cheaply!

✔ Replace wheels, tires

✔ Repair the exhaust system

✔ Replace oil, coolant

✔ Check the braking system

✔ You will perform a regular inspection of the condition of the car

✔ Repair the suspension

✔ Replace worn-out consumable parts

⚡ Kobyłki, which will serve you for many years!

✔ Lower crossbars stiffen the structure and block the phenomenon of spreading supports under the influence of weight.

✔ Wide base 195 x 205 mm evenly distributes the mass. Point pressure on the floor decreases, which reduces stress in the mare itself and extends its service life.

✔ You change the lifting range in 9 degrees from 285 to 415 mm. Quickly adjust the height of the support to suit your task.

⚡ Accurate Welds = Strength

We combined the support profiles and base with solid, nice welds.

Thick welds permanently connect the lower reinforcements of the structure.

Thanks to this, the bunnies do not wobble even after years of intensive use, and the frame retains rigidity.

✔ Set includes:

► Kobyłki 2 pieces WUBER

► Rubber Overlays

► Instruction manual in Polish

► Original manufacturer packaging

👉 These mares don’t just do the job – they do it better and more confidently. ✅ Order them and see for yourself!

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With a VAT invoice
Parametry	Brand	Wuber
Parametry	Product weight with unit packaging	5.56 kg
Parametry	Manufacturer code	W22047 KOBYŁKI SAMOCHODOWE WARSZTATOWE 3 TONY
Parametry	EAN (GTIN)	5905873309524