Automobilio atramos MARE 6T workshop stendai

Trumpai apie prekę

Prekė: Automobilio atramos MARE 6T workshop stendai. Kategorija: Darbo trestai.

• Gamintojas: Verke
• Modelis: V80094

Model: V80094

Professional 6T car stands. Stands made of thick steel profiles, have a convenient ratchet height lock. An additional advantage of these stands is the leg finished with a wide foot, thanks to which the stands do not dig into the ground under the pressure of the supported object. This protects the substrate from damage and increases the stability of the supports. Their sturdy and strong construction ensures efficient and long-lasting use. Especially dedicated to professional car workshops but will also be used in home garages. Ideal tools for mechanics as well as all motorists.

PRODUCT INFORMATION

✔ 6T Car Stands

✔ 2 pieces included

✔ Minimum height: 410 mm

✔ Maximum height: 600 mm

✔ Very good build quality

✔ Height adjustment ratchet mechanism

✔ Reinforced steel structure

▶ Our mare is a product of high quality and thoughtful design. This is evidenced by flat feet that allow you to work on any surface, stabilize and eliminate possible scratching or damage to the ground. The load capacity of six tons allows you to maintain all passenger cars and buses, because it should be taken into account that we lift only one side of the car. So these are extremely practical and useful in any workshop car bunnies.

▶ Ideal tools for mechanics and all motorists.

► Lifting capacity up to 6 tons (set)

The 6T load capacity allows you to safely support passenger cars, SUVs, and buses. It should be remembered that during operation one side of the vehicle is lifted – therefore, real durability provides a very large margin of safety in everyday work.

► Ratcheting mechanism with multi-stage adjustment

The precise height adjustment system allows you to quickly and securely position the support at the right level. The latch locks securely, eliminating the risk of accidentally leaving the vehicle.

► Wide, flat stabilising feet

Each leg is finished with a wide foot that distributes pressure evenly. Thanks to this, the stands do not dig into the ground, do not scratch the floor and maintain full stability even on less ideal surfaces.

► New improved design

The model has been further strengthened at key load-bearing points. This means greater durability, better power distribution and even longer equipment life.

⭐ Unrivalled in its price range!

► Maximum work safety

Stable base and solid ratchet lock minimize the risk of support shifting. This is a key element when working under the vehicle – safety is an absolute priority here.

► Durability for years of intensive use

The reinforced base distributes the pressure evenly, reducing point overloads. In practice, this means slower wear of the structure and the possibility of long-term use without losing parameters.

► Universality of application

The adjustment range of 410 to 600 mm allows you to adjust the height to suit different types of vehicles and range of work – from simple service activities to more advanced chassis repairs.

► Comfort and speed of service

Height adjustment is done efficiently and intuitively. The mechanic can instantly adjust the level of support without the use of additional tools.

► Stability on any surface

Flat feet allow you to work both on the concrete floor of the workshop and in the backyard garage. They do not damage the substrate and increase adhesion.

⭐ The product is perfect for:

► Professional car workshop

Ideal for everyday work on suspension repairs, braking system, wheel replacement or chassis work.

► Backyard garages

Perfect solution for DIYers and self-service workers of their vehicles.

► Car and bus service

The 6T load capacity provides secure support for a wide range of vehicles.

► Service and maintenance

They work well during technical inspections, mechanical repairs and bodywork.

✔ Strong stabilizing feet. Each leg ends with a wide foot, thanks to which the stands do not dig into the ground under the pressure of the supported object.

✔ Minimum height - 41 cm

✔ Maximum height - 60 cm

✔ The stands are made of thick steel sheet. They have a ratchet mechanism that allows very precise height adjustment on many levels.

⚡ Kobyłki, which will serve you for many years!

✔ When creating mare, care was taken to ensure that they were primarily durable and solid. Thanks to this, it is possible to use mare almost constantly, without losing performance

✔ The circles will be able to serve you for many years, because they use a reinforced base, thanks to which the pressure is distributed evenly. In practice, this will allow for less exploitation of mare by pressure, which will translate into the possibility of longer use of mare

✔ With the ratchet, you will be able to adjust their height in the range of 410-600 mm, which will allow you to set them as you currently need them

⭐ Lifting capacity of 6 tons – maximum safety and strength reserve

The most important parameter of these stands is the 6T lift, which ensures a high level of safety during operation. This load capacity means a high strength reserve even for heavier vehicles. In practice, this translates into stable and reliable support of the car without the risk of overloading the structure.

⭐ Adjustment range 410 – 600 mm – full height control

Thanks to the wide adjustment range from 410 mm to 600 mm, the user can perfectly adjust the height to current needs. This allows for comfortable work both with lower passenger cars, as well as higher SUVs or buses. Precision ratcheting mechanism guarantees quick and safe setting of the selected level.

⭐ Reinforced steel construction – durability for years

The construction made of thick steel sheet and the use of reinforced base make the pressure evenly distributed over the entire surface of the support. This reduces material consumption and minimizes the risk of deformation. It is an investment in equipment that will serve for many years of intensive work.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Verke
Parametry	Product weight with unit packaging	9.32 kg
Parametry	Manufacturer code	V80094
Parametry	EAN (GTIN)	5902963491527