Automobilio atraminės stovai MAPOWER, 3 t, 2 vnt.

Trumpai apie prekę

Prekė: Automobilio atraminės stovai MAPOWER, 3 t, 2 vnt.. Kategorija: Darbo ožiai.

• Gamintojas: MAPOWER
• Modelis: MPJS02 kobyłka samochodowa

* With additional base protection and a specially designed locking ratchet

📢Buy from the product set - we add something useful for every DIYer! 🆓🎁

✅ SAFE to use car bunnies!

✔ high quality LOCKING LEVER

✔ specially DESIGNED RUBBER OVERLAY, with groove under the threshold

✔ wide LOCKING PIN, made OF HIGH QUALITY STEEL

✔ THICK, DOUBLE WELDS

✔ wide base, ADDITIONALLY REINFORCED WITH FOOT CONNECTING BEAM

✔ maximum load 3 TONS

✔ work range 290-450 MM

✔ durable SUPPORT COLUMN WITH RATCHET MECHANISM, with special CAST IRON ALLOY, finished with RUBBER OVERLAY

Technical Specifications:

• Brand: MAPOWER
• Model: MPJS02
• Working Range: 290-450 mm
• Maximum Load Capacity: 3 tons
• Protective Rubber Pad: Yes, with a groove for the sill
• Additional Base Protection: Yes
• Weight per Jack Stand: 3.16 kg
• Set Weight: 6.32 kg

We designed these car jack stands based on customer feedback!

We've developed a model that improves upon our BESTSELLING car jack stands, model MPJS01!

• WIDER WORKING RANGE: 290-450 mm
• CONNECTING BEAM FOR FEET with double welding - unchanged :)
• Locking pin SECURED ON BOTH SIDES WITH A CHAIN, with a cotter pin
• WIDE PLATFORM, with a rubber pad GROOVED FOR THE SILL
• SUPPORT COLUMN WITH RATCHET MECHANISM made from a casting based on OUR DESIGN - load-resistant, resistant to abrasion, friction, and impact. (NOTE: cheaper models have hollow columns (!!!) inside.)

✅ High-quality security – WORK SAFELY on proven equipment!

► LOCKING LEVER — manual lever that allows TO LOCK THE RATCHETING MECHANISM. To lower the mare or change its height you need to pull the lever.

► Wide base, with ADDITIONAL BEAM CONNECTING THE FEET — ensures the stability of the mare spreading the weight of the vehicle over a larger area. Additional foot connection, increases the strength of the mare.

► THICK WELDS — strengthen the structure of the entire mare. Thanks to this, you can be sure that the design will not break in half under load, as in LOW-QUALITY products of the competition!

‼ NOTE: Don’t be fooled!

► We decided to check whether the declared LIFTING CAPACITY 4 TON in the competitive model is reflected in the actual design. We compared the BASE OF KOBYŁKA – one of the most important load-bearing elements responsible for stability and load transfer. The results leave many questions – THE BASIS of the competitive 4T model turned out to be LIGHTER than used in MAPOWER 3T.

► THE BASE MAPOWER weighs 1.8 kg (vs 1.61 kg). It is this element that is responsible for STABLE LOAD TRANSFER and safety when working under the vehicle.

► If the BASE OF KOBYŁKA is lighter than the one used in the 3T model, the LIFTING CAPACITY DECLARATION BY AS MUCH AS 33% should encourage a particularly thorough assessment of the structure and documentation confirming its strength.

► THE CHOICE IS YOURS, but remember – SUPPORTED VEHICLE WEIGHING SEVERAL TONS DOES NOT FORGIVE COMPROMISES.

IN THIS SITUATION, SAFETY IS PARAMOUNT. Therefore, it is worth trusting the construction, the reliability of which can be seen not only on the label, but above all in the QUALITY OF WORKMANSHIP, MASS OF LOAD-BEARING ELEMENTS and compliance with APPLICABLE SAFETY STANDARDS.

► LOCKING PIN made of high quality steel

The mechanism is used to lock the mare at the selected height. The pin is made of HIGH QUALITY STEEL, which prevents the mare from falling.

► Thick sheet metal construction – no bending or accidents!

The design of the mare has been specially designed to make work with them not only comfortable, but above all SAFE.

THICK SHEET mare, combined with ductile iron shank allows them to maintain load up to 3 tons!

✅ 3-ton Load Capacity and 290-450 mm Lifting Range

► Thanks to the wide working range and a load capacity of up to 3 tons, these jack stands will become an indispensable companion for car maintenance.

► Please approach similar jack stands with caution.

!!️Without reinforced sheet metal, double welds, and an additional beam connecting the feet, they can be DANGEROUS TO USE.!!️

✅ Practical and functional workshop stands

► You will be able to replace the oil, change the wheels or do a general overview of the chassis without any problems. Thanks to the mare, you will be able to perform many repairs without having to visit a mechanic.

► Special groove in the rubber overlay makes perfectly fit into the threshold of the car. Thanks to this your vehicle will rest firmly on the mare.

✅ SUPPORT COLUMN WITH RATCHET MECHANISM MADE OF HIGH QUALITY DUCTILE CAST IRON

Thanks to the addition of magnesium, the material has better mechanical properties, compared to grey cast iron.

It is characterized by high load resistance, very high tensile strength, abrasion, as well as friction and impact forces.

The set includes:

• Two mare MAPOWER MPJS02
• Instruction manual in Polish
• Original manufacturer's packaging

Specifications