Antikalkinis filtras 1/2 + 1/4 dušo bidetui tualetui

Trumpai apie prekę

Prekė: Antikalkinis filtras 1/2 + 1/4 dušo bidetui tualetui. Kategorija: Vandens filtrai čiaupams ir po kriaukle.

• Gamintojas: no brand
• Modelis: TE-Filtry do wody-068

ANTI-CAKING PRE-FILTER FOR WASHING TOILET

Practical filter mounted on the water supply, designed primarily for washing toilets, smart bidet boards and sanitary facilities with the function of washing.

The filter is an additional protective element between the water system and the device. The anti-cavity cartridge helps to reduce the formation and deposition of limescale deposit, which during long-term use can accumulate in pipes, valves and water supply elements.

The set also includes a reduction from 1/2" to 1/4" connection, making the filter easier to adjust to different connection methods.

THE MOST IMPORTANT ADVANTAGES

• Antique cartridge – helps reduce limescale build-up
• Recommended as a pre-filter for the washing toilet
• Threaded connection 1/2"
• Reduction 1/2" → 1/4" included
• Compact design – approx. 141 × 45 mm
• Assembly directly on the water supply line
• Can also be used with other water equipment
• Replacement cartridge – recommended periodic replacement

Modern washing toilets have internal water lines, solenoid valves, nozzles and small water supply channels.

During daily use, the sludge in the water can gradually accumulate inside the installation.

Applying the filter in front of the device helps:

• limit the deposition of stone sediment,
• reduce the amount of contaminants entering the device,
• protect installation components in contact with water,
• maintain more stable operating conditions of the water system.

Therefore, the filter works particularly well as a first element on the water supply to the smart toilet or bidet board.

The variant used is a version of anti-stone, designed to reduce problems related to sludge occurring in tap water.

The cartridge helps to reduce the formation of stone sludge on elements of the water system, which is particularly important in devices equipped with small wires and nozzles.

The filter is not intended for the production of drinking water or as a replacement for a complete water treatment system – its main task is preliminary protection of the device against sediment and contamination supplied with water.

The standard filter connection has a 1/2" thread, often used in domestic water installations.

The set also includes:

reduction 1/2" → 1/4"

This allows the filter to be used also in installations where the device or water supply line uses a smaller connection.

Thanks to this, one set gives a greater possibility of adjustment during assembly.

The filter has a small, oblong design, so it can be mounted even in a limited space next to the toilet.

Indicative dimensions:

• height: approx. 141 mm
• body diameter: approx. 45 mm
• main connection: 1/2"
• reduction included: 1/2" → 1/4"

The compact format means that the filter does not require a large mounting space.

The basic application of the kit is a washing toilet / bidet board, however, the filter can also be used as a pre-filter in other water installations, if the connection and pressure parameters are appropriate.

Possible use of m.in. at:

• washing toilet,
• Bidet board,
• water heater,
• washing machines,
• selected sanitary facilities,
• other water supply devices.

Always check the type of connection and the requirements of the specific device before installation.

The filter is mounted on the water supply line, in front of the device.

Typical installation method:

1. Turn off the water supply.

Disconnect the water supply line to the device.

2. Install the filter.

Screw the filter to the appropriate installation connection.

3. If necessary, apply a 1/2" → 1/4" reduction.

The adapter allows you to adjust the kit to the installation using a smaller connection.

4. Connect the device cable.

Check the correctness of connections and tightness of the installation.

5. Slowly open the water supply.

Before starting normal use, make sure that the connections do not leak.

Product Type: Pre-filter for water installation

Version: Anti-limescale

Main Application: Washlet / Smart Toilet / Bidet Seat

Housing Material: PP

Main Connection: 1/2"

Additional Reduction: 1/2" → 1/4"

Height: approx. 141 mm

Diameter: approx. 45 mm

Operating Pressure: 0.06–0.75 MPa

Water Temperature: 4–45°C

Recommended Water Source: Tap water

Approximate Filter Weight: approx. 92 g

Recommended Replacement Period: about 3–6 months

Actual replacement frequency depends on water quality, usage intensity, and local installation conditions.

• 1 × Anti-limescale pre-filter
• 1 × 1/2" → 1/4" reducer

WHY INSTALL A FILTER BEFORE A WASHLET?

A smart toilet is a device that uses water every day. Its internal system is much more complex than that of a traditional toilet.

Therefore, a small filter placed at the water inlet is a simple way to provide additional protection for the system against limescale and impurities in the water.

A small component that helps protect a much more expensive device.

Specifications