Akumuliatoriaus įkroviklis SENA 6V/12V 4A

Trumpai apie prekę

Prekė: Akumuliatoriaus įkroviklis SENA 6V/12V 4A. Kategorija: Baterijų įkrovikliai.

• Gamintojas: Sena
• Modelis: 010303

Index No. 07599

Automatic charger (rectifier) 4A designed for charging gel, AGM, MF and lead-acid wet batteries with a voltage of 6V and 12V, with a capacity from 1,2Ah to 120Ah. In addition, it is equipped with the ability to test the alternator.

Fully compatible and proven with the batteries we sell.

Ideal for:

• lead-acid batteries wet, gel and AGM
• passenger cars
• quadricycles
• boats
• mowers, scooters
• motorcycles
• Snowmobiles and water scooters

Properties:

• Charging 6V and 12V lead-acid batteries wet, gel and AGM
• Supported battery capacities: 1,2Ah to 120Ah
• Digital LCD Display
• Maintenance mode - when fully charged
• "Winter" mode - guarantees full charging of the battery, even at very low ambient temperature
• Diagnosis function of extremely discharged and used batteries
• Input Voltage: 220-240V AC 50Hz/60Hz
• charging voltage: 14.6V (14.8V in winter mode) for 12V batteries, 7.3V for 6V batteries
• charging current: 2A for 6V, 2 or 4A for 12V
• Operating temperature: -20st. to 50st.
• dimensions: 18 x 8 x 4.5 cm
• IP65 class housing - high resistance to dust and splashes
• II class of electrical insulation
• Network cable with a length of 155 cm
• Cables with crocodiles also 155 cm long
• Alternator Testing Function

Easy-to-read LCD display

1. The icon indicates 2A charging, which applies to small capacity batteries used in motorcycles, quads, snowmobiles, jet skis, garden tractors and golf carts.
2. The icon indicates 4A current charging, which is used to charge medium to large capacity batteries, used in cars, tractors, boats, designed for deep charging cycle.
3. "Winter" charging mode, this means that the maximum charging voltage is 0,2V higher than usual. Recommended when temp. It will fall below 10stC.
4. “6V” means the charging mode of 6V batteries.
5. “12V” means the charging mode of 12V batteries.
6. The icon indicates the progress of the current load.
7. The numbers or characters will indicate the battery voltage or error code.

• Mode 6V

The program is designed to charge 6V batteries with a capacity from 1.2 to 14Ah. Charging current max 2A, charging voltage 7.2V

• 6V / Winter mode

The program is designed to charge 6V batteries with a capacity from 1.2 to 14Ah. Charging current max 2A, charging voltage 7.4V

• Mode 12V/2A

The program is designed to charge 12V batteries with a capacity from 1.2 to 14Ah. Charging current max 2A, charging voltage 14.6V

• Mode 12V/2A / Winter

The program is designed to charge 12V batteries with a capacity from 1.2 to 14Ah. Charging current max 2A, charging voltage 14.8V

• Mode 12V/4A

The program is designed to charge 12V batteries with a capacity from 14 to 120Ah. Charging current max 4A, charging voltage 14.6V

• Mode 12V/4A / Winter

The program is designed to charge 12V batteries with a capacity from 14 to 120Ah. Charging current max 4A, charging voltage 14.8V

• Battery Maintenance Mode

When the battery is fully charged, the rectifier will automatically switch to voltage maintenance mode. This is indicated by a constantly glowing LED light.

Stages of charging:

• Stage 1 - Diagnostics: Analyze whether the battery can accept charge or not. This avoids charging a malfunctioning battery;
• Stage 2 - Charging preliminary: If the battery voltage is below 12V, the rectifier charges with low current to better protect the battery;
• Stage 3 - Mild start: Gradual charging until maximum intensity is reached without sudden spikes.
• Stage 4,5,6 - CC1,CC2,CC3 (Permanent current): Rapid change of speed, change of intensity depending on the condition of the battery, has a positive effect on battery life;
• Stage 7 - CV (Permanent Voltage): The battery is charged almost fully and then recharged to 14,6V DC;
• Stage 8 - Rest: The rectifier will cut off the power when the battery is fully charged, when the word FULL appears on the display;
• Stage 9 - Restoration: The rectifier automatically detects the full charge of the battery indicated by the appearance of the word FULL on the display;

With a drop below 12.8V DC, it will perform the above steps 4 to 7 again.

Security of the device:

• PROTECTION AGAINST POLARITY REVERSAL - An error code will be displayed indicating REVERSE POLARITY, then the transmission of energy to the output wires is blocked.
• SHORT-CIRCUIT PROTECTION - Protection is activated when the rectifier detects below 0,5V at the terminals, the transmission of energy to the output wires will be blocked.
• SURGE PROTECTION - Protection is activated when setting the charging voltage other than the detected parameter.
• PROTECTION AGAINST OVERHEATING - The rectifier will reduce the charging intensity and even turn off if overheating is detected. After cooling, the rectifier will resume work.
• BATTERY DIAGNOSTICS FUNCTION - The rectifier constantly monitors the status of the battery and can report a charging error in the form of an error code.
• WORKING MODE SELECTION MEMORY FUNCTION - The microprocessor inside the rectifier is equipped with settings memorization functions, which means that the rectifier will select the last used battery charging settings. Thanks to this, the user does not have to worry about forgetting what settings he used recently, it also reduces the time of preparing the rectifier for work.

Specifications