Vandens nuosėdų priešfiltris visiems namams, 3/4″, tinklelis

Trumpai apie prekę

Prekė: Vandens nuosėdų priešfiltris visiems namams, 3/4″, tinklelis. Kategorija: Filtrai ir vandens minkštikliai.

• Gamintojas: Aquafilter
• Modelis: 2-ST-S-C
• Talpa: 0 l

• 10" 2-STAGE IN-LINE BODY AQUAFILTER, connection size - 3/4''
• PLATE + MOUNTING SCREWS
• KEY FOR UNSCREWING THE BODY
• 2 ANTIBACTERIAL CENTERING DISCS
• 2 x O-RING
• MESH INSERT NOT REQUIRING REPLACEMENT WST10-50 TOP FILTER
• 5 X STRING INSERT PP20 WODRO

Complete 2 stage pre-filter for installation at the entrance of the installation to the house.

• easy to install, aesthetic and ergonomic
• provides accurate mechanical filtration by removing sand, silt and rust
• The use of the mesh cartridge as the first stage of filtration extends the life of the remaining filters.
• 3-piece body housing ensures maximum tightness and guarantees ease of replacement of cartridges

AND FILTRATION RATE :

WST10-50 TOP FILTER

Reusable mesh cartridge is used to remove mechanical impurities such as rust sand suspension, etc. This product has an advantage over other cartridges in that it can be cleaned and re-filtrated for water filtration. Cleaning involves rinsing the cartridge under running water.

TECHNICAL PARAMETERS :

• Filtration Accuracy: 50 microns
• Height: 10"
• Capacity: 25 l/min
• Life between rinses: up to 20000l *

*) The service life of the cartridges depends on the quality of the filtered water and the degree of its contamination.

II DEGREE OF FILTRATION :

PP20 WODARO

Universal sedimentary cartridge made of polypropylene cord by WodaRO. Stops all kinds of mechanical contamination: sand, silt, rust, etc.

PP20 polypropylene string inserts are made of pure polypropylene fiber, wound on the filter core. This design provides an increase in the density of the filter towards its core. These cartridges are designed for pre-filtration of slurries and mechanical deposits that can cause damage to heating appliances and household appliances.

PROPERTIES OF PP20 WODRO CARTRIDGE :

• Used for cold and hot water
• cartridges are made of braided polypropylene cord
• The cartridge density gradient allows larger particles of contaminants to be retained in the outer layer of the filter, while smaller ones inside, which prolongs the life of the cartridge
• Minimum pressure drop at high flow rates
• cartridge has PZH hygienic approvals
• made of NSF and FDA certified materials
• Operating temperature from 1°C to 52°C
• high rigidity and strength of cartridges
• service life up to 6 months
• cartridges stop all kinds of mechanical contaminants: sand, rust, silt
• Cartridge stem made of high quality polypropylene

TECHNICAL PARAMETERS :

• filtration accuracy :20 microns
• Height: 10''
• Capacity: 25 l/min
• Cartridge life up to 3-6 months*

*) The service life of the cartridges depends on the quality of the filtered water and the degree of its contamination.

THE SET INCLUDES UP TO 5 PP20 WATERRO STRING INSERTS!

ADDITIONALLY INCLUDED 2 ANTIBACTERIAL CENTERING DISCS

The disc was made in BACInix™ antibacterial technology using nanosilver, which is a bacteriostatic agent that prevents the growth of microorganisms inside the filtration system, which allows you to extend the storage time and protects against further microbiological contamination.

Centering disk:

• facilitates the correct installation of the cartridge
• prevents the development of bacterial flora
• reduces the risk of developing pathogenic microorganisms
• made of the highest quality materials in the European Union
• compatible with most cartridges on the market
• ensures proper positioning of the cartridge when twisting components
• reduces the likelihood of damage to the cartridge during installation
• BACinix technology based on nanosilver, provides antimicrobial protection

CHARACTERISTICS OF THE IN-LINE CORPUS AQUAFILTER :

It has a transparent 10" body that allows optical assessment of the degree of contamination of the cartridge placed inside the lampshade. The 3-piece housing ensures maximum tightness of the body and guarantees easy replacement of cartridges. The head has a brass thread.

The product is made of the highest quality materials, manufactured and assembled in the European Union.

The in-line body of the filter is one of the elements needed to independently create a functional system that allows for proper filtration of water. It is suitable for use with both tap water and in-house water. It is characterized by excellent durability and resistance to harmful effects of liquids. It owes such properties to the high quality plastic.

3-PIECE BODY AQUAFILTER CONSISTS OF :

- brass thread heads (1)

- rings (2)

- transparent lampshade (3)

Three-piece construction ensures maximum tightness of the body and guarantees ease of replacement of cartridges.

TECHNICAL PARAMETERS OF THE BODY :

• Connection diameter: 3/4"
• maximum working pressure: 6 bar
• maximum temp. Working: 2-45 degrees Celsius
• Number of O-rings under the head: 1
• Cartridge Standard: 10''

SET INCLUDES :

• 10" 2-STAGE IN-LINE BODY AQUAFILTER, connection size - 3/4''
• PLATE + MOUNTING SCREWS
• KEY FOR UNSCREWING THE BODY
• 2 ANTIBACTERIAL CENTERING DISCS
• 2 x O-RING
• MESH INSERT NOT REQUIRING REPLACEMENT WST10-50 TOP FILTER
• 5 X STRING INSERT PP20 WODRO

Specifications