Tinklo jungiklis CUDY FS106P, 6 prievadų, PoE+, 36W, 802.3af/at, Extend

Trumpai apie prekę

Prekė: Tinklo jungiklis CUDY FS106P, 6 prievadų, PoE+, 36W, 802.3af/at, Extend. Kategorija: Jungikliai ir koncentratoriai.

• Gamintojas: Cudy
• Modelis: FS106P

The Cudy FS106P 1.0 is a compact network switch with six RJ45 ports, including four PoE ports, compliant with IEEE 802.3af/at standards. The device offers VLAN and Extend support and automatic power management. It works well in installations requiring power supply to devices over Ethernet, while maintaining simplicity of implementation.

4 IEEE 802.3af/at compliant PoE ports - The ability to power network devices via Ethernet cable – up to 30W per port.

Total PoE budget: 36 W - Support several PoE-powered devices with a controlled power limit.

VLAN and Extend modes with PoE Watchdog - Ports #1~#4 support VLAN isolation and transmission up to 250 m (10 Mbps) in Extend mode.

Physical DIP switch: VLAN / Default / Extend - The mode of operation is selected using a mechanical switch.

PoE overload protection - If the power limit is exceeded, the last device is disconnected according to priority.

Compact design and power supply included - Plastic housing, desk or wall mounting, 54V DC power supply.

Simple and effective switch with PoE power supply

The FS106P features four PoE ports that support IEEE 802.3af and IEEE 802.3at. Each port can provide up to 30W of power, and the total power budget is 36W. This allows you to connect several PoE devices simultaneously, such as access points, IP cameras or VoIP phones.

VLAN and Extend modes – greater range and control

The device supports two special modes on ports #1~#4. VLAN mode enables logical isolation of ports, limiting broadcast traffic on the network. Extend mode allows you to increase the transmission range to 250 meters at 10 Mbps (Cat.5e cable or better required), making it easier to deploy in larger spaces.

DIP switch and automatic port restart

Changing the operating mode is carried out using a physical DIP switch. In VLAN and Extend modes, the PoE Watchdog function is activated – the device monitors port activity and automatically restarts inactive connections, which can help stabilize the operation of connected devices.

Intelligent PoE power management

The switch monitors power utilization and automatically disconnects the recently powered device if the total power consumption exceeds the available PoE budget. This provides a basic overload protection mechanism and stability of network operation.

Sturdy, compact housing and simple installation

The housing made of plastic has dimensions of 138×61,5×24 mm and a weight of 88 g. The device can be mounted both on the desk and on the wall. The set includes a DC 54V⎓0.93A power supply and a power cord.

Technical data:

• Ethernet ports: 6× RJ45 10/100 Mbps (ports 1 to 4 with PoE)
• PoE standards: IEEE 802.3af / 802.3at
• Max. power per PoE port: 30 W
• Total PoE budget: 36 W
• Power management: Disconnecting the last powered device after exceeding the budget
• Modes: VLAN, Extend
• Range in Extend mode: Up to 250 m at 10 Mbps (ports 1 to 4, Cat.5e+)
• PoE Watchdog: Active in VLAN and Extend modes
• Physical mode switch: DIP switch: VLAN / Default / Extend
• MAC Address Table: 2048
• Switching bandwidth: 1.2 Gbps
• Forwarding Rate: 0.8928 Mpps
• Package buffer: 570 Kbit
• Jumbo Frame: 2 KB
• IEEE protocols: 802.3i, 802.3u, 802.3x, 802.3af, 802.3at
• Power supply: DC 54V⎓0.66A (54V⎓0.93A power supply included)
• Power consumption (without PoE): Up to 2 W
• Working temperature: 0 – 40°C
• Working humidity: 10 to 90% (non-condensing)
• EMC resistance: IEC/EN 61000-4-2, 61000-4-5
• Housing / Assembly: Plastic / desk or wall
• Dimensions / Weight: 138×61,5×24 mm / 88 g
• Package Contents: Switch, Power Supply, Power Cord, Manual

Specifications