Pramoninis Ethernet komutatorius su BPL perdavimu BSB615-PP-AC

Trumpai apie prekę

Prekė: Pramoninis Ethernet komutatorius su BPL perdavimu BSB615-PP-AC. Kategorija: Jungikliai ir koncentratoriai.

• Gamintojas: no brand
• Modelis: REDZ-BSB-615

BSB615-PP-AC is an industrial unmanaged Ethernet switch that enables network communication both through Ethernet ports and through power lines (BPL – Broadband Power Line).

The device has 4 Ethernet ports 10/100Base-T(X) and BPL interface, which allows data transmission via power cables. This makes it possible to build network infrastructure in places where the installation of classic Ethernet cabling is difficult or impossible.

The switch has been designed to work in demanding industrial conditions, such as energy, industry, urban infrastructure or Smart Grid systems.

• 4 Ethernet ports 10/100Base-T(X)
• 1 BPL (Broadband Power Line)
• data transmission via energy lines
• power supply 110 – 240 V AC
• Support for phase-to-phase and phase-to-neutral transmission
• Master / Slave operating mode selection
• automatic MDI / MDI-X
• Support for Full-Duplex / Half-Duplex
• mounting on rail DIN
• Industrial housing IP40
• wide operating temperature range -40°C to +85°C
• designed to work in harsh industrial environments

The device is used in:

• industrial automation
• energy networks
• Smart Grid systems
• monitoring of infrastructure
• industrial installations
• IoT and Smart City systems
• Network expansion where brak Ethernet infrastructure

BPL technology enables data transmission through existing power cables.

Transmission parameters

• PHY bandwidth: up to 30 Mbps
• Support for up to 10 network hops
• Support for up to 1000 devices on the network
• up to 432 sub-carriers
• Analog band 2 to 28 MHz
• modulation of OFDM-432
• MAC CSMA/CA protocol

Security of transmission

• AES 128-bit encryption
• LDPC-C FEC error correction

Standards

• IEEE 802.3 – 10Base-T
• IEEE 802.3u – 100Base-T(X)
• IEEE 802.3x – Flow Control

Parameters

• 4 RJ45 10/100Base-T(X) ports
• automatic MDI / MDI-X
• Full-Duplex / Half-Duplex mode

Architecture

• processing method: Store-and-Forward
• MAC table: 1000 addresses
• packet buffer: 448 Kbit

The device allows you to configure the operating mode:

• Master
• Slave

The mode is selected using the switch on the device.

The device has LEDs informing about the operating status:

• Power LED – power supply
• Ethernet Activity LEDs – Ethernet port activity
• BPL Activity – data transmission through the power line
• BPL Link – BPL connection status
• Master Indicator

  LED ON – Master

  LED OFF mode – Slave

  mode

The device is powered by voltage:

• 110 TO 240 V AC
• 50 – 60 Hz

The power supply is connected via the power terminal (pins 1 and 2).

The device supports several transmission modes.

PP – Phase to Phase (standard)

Transmission between phases:

• L1 – L2
• L2 – L3
• L1 – L3

PN – Phase to Neutral

Transmission between:

• phase and neutral (L-N)

DC Model

Transmission via DC line (e.g. 24 V DC).

Housing: metal

Degree of protection: IP40

Dimensions:

43 × 95 × 124 mm

Weight:

approximately 400 g

Working temperature:

-40°C to +85°C

Storage temperature:

-65°C to +150°C

Moisture:

5 to 95% non-condensing

Specifications