Plokštė Raspberry Pi SIM7070G su NB-IoT, Cat-M, GPRS ir GNSS

Trumpai apie prekę

Prekė: Plokštė Raspberry Pi SIM7070G su NB-IoT, Cat-M, GPRS ir GNSS. Kategorija: Priedai.

• Gamintojas: WaveShare
• Modelis: SIM7070G Cat-M/NB-IoT/GPRS HAT (EN) 18078

Additional pins on the module board allow for use with Arduino/STM32.

Features:

• 40-pin GPIO connector for Raspberry Pi
• Supported protocols: TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
• Positioning: GPS, BeiDou, GLONASS, Galileo
• USB interface for AT command testing, GPS data reading, etc.
• UART interface for Arduino/STM32 connection
• SIM card slot (supports 1.8V SIM cards ONLY)
• LED indicators for easy monitoring of communication status
• Baudrate: 300 to 3686400 bps
• Available usage examples for Raspberry Pi/Arduino/STM32

Specifications

NB-IoT/Cat-M/2G

• Bands:
• NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85
• Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85
• GSM/GPRS/EDGE: 850/900/1800/1900MHz
• Data Rates:
• NB-IoT: 136Kbps (Download) / 150Kbps (Upload)
• Cat-M: 589Kbps (Download) / 1119Kbps (Upload)
• GPRS: 85.6Kbps (Download) / 85.6Kbps (Upload)
• EDGE: 236.8Kbps (Download) / 236.8Kbps (Upload)
• SIM Card Support: NB-IoT/Cat-M/2G card (1.8V SIM card ONLY)
• Applicable Region: Global

GNSS

• Receiver Type:
• 16-channel
• C/A Code
• Bands:
• GPS L1: 1575.42 ± 1.023MHz
• GLONASS L1: 1598.0625 ~ 1605.375MHz
• BDS B1: 1559.052 ~ 1591.788MHz
• Galileo L1: 1575.42 ± 1.023MHz
• Data Format: NMEA-0183
• Antenna: Active antenna

Other

• Power Supply: 5V
• Operating Voltage: 5V / 3.3V (configurable via 0Ω resistor)
• Current Consumption: Approx. 41mA (idle mode)
• Operating Temperature: -40°C to 85°C
• Storage Temperature: -45°C to 90°C
• Dimensions: 30.50mm × 65.00mm

Connection Example

Raspberry Pi

Standard 40-PIN GPIO Connector

Board Description

1. SIM7070G Module
2. MP1482 Power Management IC
3. RT9193-33 Power Management IC
4. Raspberry Pi GPIO Connector for connecting to Raspberry Pi
5. USB Connector for AT command testing, GPS data reading, etc.
6. SIM7070G Control Interface for connecting to Arduino/STM32
7. SIM Card Slot (1.8V SIM cards ONLY)
8. GNSS (GPS) Antenna Connector
9. LTE Antenna Connector
10. Module Power Switch
11. Network Status Indicator LED
12. Power Indicator LED
13. Operating Voltage Selection (IO lines): A: 5V IO voltage, B: 3.3V IO voltage (default)
14. DTR Setting: A: DTR connected to P26, B: DTR disconnected (default)
15. PWR Selection: A: PWR connected to P4 (default), B: PWR connected to power supply

Dimensions

The set includes:

1. HAT for Raspberry Pi with SIM7070G
2. LTE Antenna
3. GPS Antenna
4. USB Cable
5. Mounting Standoffs

Specifications