Komutatorius ATTE xPoE-6-11-S3, 6 išoriniai PoE prievadai

Trumpai apie prekę

Prekė: Komutatorius ATTE xPoE-6-11-S3, 6 išoriniai PoE prievadai. Kategorija: Jungikliai ir koncentratoriai.

• Gamintojas: Atte
• Modelis: XPOE-6-11-S3

Switch PoE 6 port 10/100Mbps (5xPoE + 1xUplink), electronic fuses, Long Range mode, in external housing ABOX-S3, without power supply, xPoE-6-11-S3

Key features and functions:

• possibility of powering 5 PoE 802.3at/af or PASSIVE receivers

• possibility of data transmission at 280m (in Long Range mode)

• electronic fuse independently for each PoE channel (auto return)

• possibility of switching off the power supply on selected PoE ports

• clear optical indication of power supply and data transmission status

• wide range of input voltage (10...56VDC)

• Output voltage = Input voltage

• up to 70W power on LAN_5 PoE IN/OUT port

• up to 40W of power on other PoE ports

• Powered by screw connector (Vin) or other PoE PASSIVE switch (PoE IN/OUT port)

• possibility of cascade power supply - one xPoE powers another (PoE IN/OUT port)

• easy and quick start-up without the need to configure parameters

• very low power consumption (< 1,5W)

• assembly of modules in any open part of the mounting plate (raster system)

• possibility of maintaining the supply of cables inside the housing

• cable entry through rubber cap mounted in the housing: 2x29mm

• 2 handles included for mounting the housing without violating the IP55 degree of protection

xPoE-6-11-S3 was designed as a universal PoE network switch dedicated to IP CCTV systems. Electronic protection of PoE outputs ensures continuity of operation of the entire system when short-circuiting or overloading individual power branches and automatic return of voltage after failure. The “Long Range” mode allows you to increase the transmission range to 280m using a standard UTP twisted pair cable.

Unmanaged PoE switches and extenders are designed to work with IP cameras and other network devices powered in the PoE 802.3at/af and PoE PASSIVE standards.

External enclosures of the ABOX series are a convenient solution to the problem of protection of devices and cable connections installed in outdoor conditions. High-quality plastic provides resistance to UV radiation and other adverse weather conditions. The models available in the offer have been equipped with mounting plate, having a special hole in the pitch of 10,8mm. It is compatible with the mounting hole spacing of built-in modules. The system solution allows for vertical or horizontal installation of selected devices in any part of the mounting plate.

TECHNICAL SPECIFICATION:

• LAN ports: 6 RJ45 10/100Mbps ports (5xLAN+PoE, 1xUpLink)

--

Supported PoE receivers (standard / power max):

• 802.3af - up to 15.4W LAN_1 ... LAN_5
• 802.3at - up to 30W LAN_1 ... LAN_5
• PoE PASSIVE - up to 70W LAN_5 / up to 40W LAN_1 ... LAN_4

--

• Supported PoE transmitters (standard / power max): PoE PASSIVE - up to 70W LAN_5 / up to 40W LAN_1...LAN_4

--

PoE outputs (standard / power mode):

• LAN_1...LAN5:
• PoE PASSIVE, mode B (4.5+) (7.8-)

--

PoE input (standard / power mode):

• LAN_5:
• PoE PASSIVE, mode B (4.5+) (7.8-)

--

PoE output protection (overcurrent / short circuit):

• LAN_1...LAN_4 - 0,75A / electronic (auto-return)

• LAN_5 - 1,25A / electronic (auto-return)

--

SW1 microswitches:

• switch 1 "MODE" - switch operation mode

• 2...6 "PoE ON/OFF" switches - PoE power supply on LAN_1...LAN_5 ports

Working mode "Standard":

• 1 "MODE" switch in the OFF position

• LAN_1...LAN_6 - range up to 100m (10/100Mbps)

--

Long Range mode of operation:

• 1 "MODE" switch in ON position

• LAN_1...LAN_4 - range up to 280m (10Mbps)

• LAN_5...LAN_6 - range up to 100m (10/100Mbps)

--

• Input voltage range: Vin 10...56VDC

• Output voltage for PoE devices: Vout = Vin

• Housing mounting: wall mounted, mounting brackets

• Assembly of devices inside the housing: system hole 4,8mm in 10,8mm pitch

• Operating temperature range: -25°C...+40°C

• Housing (type / material / color / cable passes): ABOX-S3 / plastic / RAL7035 grey / rubber cap 2x29mm

• Dimensions / net weight / degree of protection: 150x110x70mm / 0,36kg / IP55

Manufacturer code: xPoE-6-11-S3 / xPoE-6-11-S3

Specifications