Dujų reduktorius propano–butano balionui su manometru

Trumpai apie prekę

Prekė: Dujų reduktorius propano–butano balionui su manometru. Kategorija: Maži aksesuarai.

• Gamintojas: Bradas
• Modelis: RG A310IE-002-M

Product Features:

✅ The gas reducer is designed for domestic use and is compliant with EN16129.

✅ Used for any type of cylinder equipped with a valve with manual opening and connection 21,8 x 1,14L.

✅ Used to supply devices with gas with pressure indicated on the rating plate.

✅ The reducer has a pressure gauge indicating the current pressure in the cylinder.

✅ It has a safety valve, which activates in cases where the gas device has a higher level of gas consumption, than the reducer can handle or there has been a break in the cable.

✅ The use of a pressure gauge is mainly aimed at checking the tightness of the installation.

✅ The pressure gauge enables to perform a leak test during the installation of a new installation and indicates a low level of gas in the cylinder.

In order to perform the leak test, the following steps must be performed:

➡ install your system;

➡ then unscrew the cylinder valve;

➡ fill the hose with gas;

➡ turn off the cylinder valve and stop the gas in the hose.

At this point, the gas is in the system. If this system is gas-tight, the tip on the pressure gauge will be fixed motionless. In the event of a leak, the tip will slowly move to zero.

In this case, the user will have to find the leak with soap and water, and then repair.

An additional advantage of the pressure gauge is only to inform e about low gas levels.

The actual gas level can be observed as below:

➡ blue: empty cylinder, no more liquid gas. Do not use the cylinder until it is filled

➡ yellow: early warning - plan your refill as soon as possible. The estimated gas level allows for use for a period of 1-2 hours. Cylinder pressure greater than 1 bar

➡ green: sufficient level of gas in the cylinder. Ready to go. Estimated level of gas consumption in hours. Cylinder pressure from 1 to 12 bar

The pressure gauge does not indicate the exact level of liquid gas, but informs about the need to replace the cylinder in the near future.

This allows you to make sure that the cylinder is empty and not replace the cylinder still filled with gas.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With a VAT invoice
Parametry	Brand	Bradas
Parametry	Kind	other
Parametry	Manufacturer code	RG A310IE-002-M