Iga toote tarneaeg on välja toodud hinna juures.
Tarned üle Eesti: tasuta.
Trumpai apie prekę
Prekė: Akumuliatorių įkroviklis Ideal EXPERT CHARGER 12 LCD, 12A, 3in1. Kategorija: Baterijų įkrovikliai.
- Gamintojas: no brand
Ideal EXPERT CHARGER 12 LCD 3in1 12A Smart Rectifier
Intelligent rectifier Ideal EXPERT CHARGER 12 LCD 3in1 12A
Intelligent rectifier for charging and testing WEL/GEL/MF/AGM/CAL/LiFePO4 batteries. 9-step charging process. Power supply 230V. 12V charging voltage. Charging current 12A.
Technical parameters
EXPERT CHARGER 12 LCD 3in1 is a multifunctional electronic rectifier for charging and testing 12 volt batteries:
- WET (liquid - acidic)
- GEL (gel)
- MF (maintenance-free)
- AGM (with fiberglass mat)
- EFB (for vehicles with Start-Stop system)
- CAL (calcium)
- LFP (lithium iron phosphate)
The microprocessor control system ensures an automatic charging process. After reaching the required voltage on the battery, the backup status is switched to and the charging is automatically resumed after the voltage on the battery drops.
EXPERT CHARGER 12 LCD has 4 charging modes:
- STD – acidic liquid batteries WET and MF (additional winter mode)
- AGM – AGM, gel, EFB batteries (additional winter mode)
- CAL – calcium batteries
- LiFePO4 – Lithium iron phosphate (LFP) batteries
Cold battery charging function: optimizes charging at very low temperatures (low temperatures can adversely affect the chemical structure of battery components).
The device allows you to verify:
- battery charge status and actuation capacity of 12V batteries used in vehicles (BATTERY TEST)
- functioning of the vehicle start-up system 12V (START-UP TEST)
- functioning of the charging circuit in a 12V vehicle (ALTERNATOR TEST)
Battery Replacement Voltage Maintenance Function (SAVE)
Charging process
The 9-step charging process ensures optimal battery charging conditions. The automatic control system will adjust each of the 9 charging stages to properly charge the battery:
- STAGE 1 - Diagnostic - analyzes the battery and checks whether it can accept charging current; prevents charging the damaged battery
- STAGE 2 - Recovery charge – low voltage batteries are pre-charged with low current but with increased voltage; very discharged batteries can be restored to a usable state and this ensures a longer battery life, the stage is skipped if the battery is minimally discharged and in good condition.
- STAGE 3 - Soft start – the rectifier gradually increases the charging current to reach the set charging current
- STAGE 4 - Pulse charge – the battery is charged with pulse current (pulse fluctuations take place in the DC current range)
- STAGE 5 - Reconditioning – preparation stage for charging in the bulk charge stage
- STAGE 6 - Bulk charge – constant current charging to the previously set voltage (14.4÷14.7V)
- STAGE 7 - Absorption charge – after reaching the required degree of battery charge, there will be a change to constant voltage (CV) charging and the charging process will be completed
- STAGE 8 - Evaluation diagnostic - automatic monitoring of battery voltage after charging
- STAGE 9 - Maintenance charge – stage supporting the battery (float) and monitoring its condition; resumes charging with reduced current if necessary.
Physical parameters
The device is equipped with protection: thermal, against the formation of sparks at the pole terminals, against short circuit of poles, overload and reverse polarity.
Specially designed housing allows you to mount the rectifier on the wall, which will save valuable space in the garage or workshop.
Charging cables are 2 meters long.
Power supply parameters
Single-phase power supply 230V.
Length of power cord 2m.
The device is equipped with a power plug.
The warranty service is carried out in a door-to-door system without transport costs on the part of the user.
Advantages of EXPERT CHARGER 12 LCD 3in1:
- Multifunctionality (3 in 1) – EXPERT CHARGER 12 LCD 3in1 acts as a rectifier and battery maintenance device, making it a versatile tool. Thanks to this, it can not only charge batteries, but also maintain their state of charge and regenerate used batteries.
- Compatibility with many types of batteries – The device is designed to charge various types of batteries, including lead-acid (AGM, GEL, EFB) and lithium-ion batteries, making it a versatile tool for use with batteries of various vehicles and devices.
- Readable LCD display – The rectifier is equipped with a large, easy-to-read LCD display that easily presents information about the state of charge of the battery, operating parameters, as well as charging modes. This makes it easier to monitor the charging process and increases control over the device.
- Automatic charging process – EXPERT CHARGER 12 automatically adjusts the charging parameters to the battery status, which minimizes the risk of overcharging and battery damage. The intelligent system monitors and adjusts the charging current for maximum efficiency.
- Battery Maintenance Function - Thanks to the maintenance mode, the rectifier can keep the battery in perfect condition, preventing it from discharging during prolonged downtime, which is especially useful when storing seasonal vehicles such as motorcycles or lawn mowers.
- Safe charging – The device has a number of protections, including against reverse polarity, overheating, overcharging and short circuit. These protections increase the safety of both charging and the user himself, eliminating the risk of damage to the battery or rectifier.
- Recovery mode – This function allows the regeneration of deeply discharged or weakened batteries, which extends their service life and allows them to be reused, which can lead to savings associated with the need to purchase new batteries.
- Ease of use – The intuitive interface and easy-to-use control panel make the EXPERT CHARGER 12 LCD easy to use for both professionals and individual users.
- Compact size and portability – The device is lightweight and portable, making it easy to transport and store. This allows it to be used in a variety of locations, whether in the garage or on the go.
- Universal use – EXPERT CHARGER 12 LCD 3in1 is suitable for charging batteries in cars, motorcycles, boats, mowers and other vehicles or devices, making it an extremely practical and versatile tool.
With these advantages, the EXPERT CHARGER 12 LCD 3in1 is a versatile, safe and intuitive device for charging, maintaining and regenerating batteries, ideal for both professionals and individual users.
Rated supply voltage
230 V
Power
280 IN
Degree of protection
IP20
Weight
1,4 kg
Overall dimensions L x W x H
210x120x65 mm
300x170x135 mm
Charging voltage
12 V
Charging current
up to 12A
Rated battery capacity Ah 15h (min/max)
1,2 - 250
- Charging current 12V: 12A
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With a VAT invoice |
| Parametry | Brand | no brand |
| Parametry | Maximum amperage | 10 A |
| Parametry | EAN (GTIN) | 5908117642197 |
| Parametry | Batteries included | no |