Žirklinis keltuvas Redats L-540F 3 t 230V automobiliams

Trumpai apie prekę

Prekė: Žirklinis keltuvas Redats L-540F 3 t 230V automobiliams. Kategorija: Žirkliniai keltuvai.

• Gamintojas: Redats
• Modelis: 15-02-30

• Symbol: 15-02-30
• Maximum lifting capacity: 3000 kg
• Maximum lifting height: 1000 mm
• Minimum height: 115 mm
• Mobile: No
• Lowering time: 35 seconds
• Lifting time: 35 seconds
• Drive: hydraulic
• Length of platforms (without overruns): 1400 mm
• Overall length (with overruns): 2030 mm
• Overall width: 2120 mm
• Application: Passenger cars and vans
• Engine power: 2,2 kW
• Power supply: 230V 50Hz
• Accessories included: Anchors - 6 pieces, 4 rubbers measuring 120x100x50mm

This is the perfect choice if you are doing:

• replacement of tyres,
• peri-suspension works,
• vehicle diagnostics,
• Working with cars with low clearance.

This is a great alternative to the traditional channel. You can mount the lift permanently by anchoring it in the ground, or easily move it around the workshop after buying a mobile kit.

• Leverage 3 tons

You can use it to handle most passenger cars and delivery vans. You will no longer have to send customers home, because your lift “will not lift so much”.

• Power supply 230V

It operates on a regular single-phase power supply. You connect it without a three-phase installation and without additional modifications. Faster and more comfortable.

• Minimum height 115 mm

Low height makes it easier to enter cars with low clearance. You are more comfortable servicing lower cars and you do not have to worry about how the “sports car” will enter your workshop.

• Lifting height 1000 mm

You gain convenient access to wheels, brakes and suspension. You work faster and in a more comfortable position.

• Working cycle 35 seconds

You pick up and leave the car in 35 seconds. You don’t waste time between vehicles. In season (when every second counts) this is especially important!

• Total length with spread overruns 2030 mm

The design also allows you to handle longer cars, so you can take on a wider range of cars and serve more customers in one position.

• Security barriers on both sides

They designate a safe zone so as not to slide the legs under the structure when lowering.

• Control panel on wheels + large, easy-to-read buttons

You can set the panel where you are comfortable, and the large and legible UP, DOWN and LOCK buttons will allow you to quickly operate the lift and reduce the risk of confusion.

• Maximum position limit switch

When the lift reaches its maximum height, further lifting is automatically locked.

• Safety valve

It protects cylinders and hydraulic lines from excessive load, which strongly reduces the risk of failure.

• Safety ratchets + emergency lowering

Ratchets block the lift at a certain height and do not allow it to fall if the pressure in the system drops. In turn, in the absence of power, you can emergency lower the device, so you have more control, even in unforeseen situations.

What will you find in the set?

• Scissor lift REDATS L-540F
• 6 mounting anchors
• User manual
• 4 support rubbers 120 × 100 × 50 mm

Rubbers protect the support points of the car, improve stability when lifting and reduce the risk of damage to the thresholds and chassis.

Technical data:

• Maximum lifting capacity: 3000 kg
• Maximum lifting height: 1000 mm
• Minimum height: 115 mm
• Lifting time: 35 seconds
• Lowering time: 35 seconds
• Length of platforms (without overruns): 1400 mm
• Length of platforms (with overruns): 2030 mm
• Overall width: 2120 mm
• Engine power: 2,2 kW
• Power supply: 230V 50Hz

If you want to work faster and not lose space in the workshop, this model is a hit. Thanks to its compact design, the lift takes up little space and (most importantly! ) just works well in everyday work.

UDT - to report or not?

You often ask whether you need to report the lift to the UDT (Office of Technical Inspection). According to Polish law, this must be done. Few sellers talk about it, but in light of the regulations, it does not matter whether you use the lift for your business or privately. Whether you work alone or hire people - the lift is worth registering in UDT.

Want to report a lift to UDT?

If you want UDT to collect and allow your new lift to be put into operation, it is worth commissioning its assembly to a team with appropriate permissions. We can help you with that. Contact us and we will prepare a quote for you for the assembly made by a qualified company!

Important

The user is obliged to bring the power cord to the device on his own.

OIL FOR LIFT

Attention! Oil must be purchased separately.

Specifications