Vonios radiatorių su termostatu, 1800W, 2B

Trumpai apie prekę

Prekė: Vonios radiatorių su termostatu, 1800W, 2B. Kategorija: Elektriniai šildytuvai.

• Gamintojas: Radialight
• Modelis: WINDY 2B

Bathroom electric heater LIFT for wall mounting with built-in digital weekly thermostat, controlled by touch-responsive buttons, which itself changes the heating power as needed. It allows for even heat distribution in the bathroom, regardless of the place of installation of the LIFT. The thermostat is located on the right side of the radiator.

The LIFT bathroom fan is very flat, it is only 11,2 cm thick.

Control of the heater is carried out using a touch panel

WINDY 2B has an additional rail for drying towels

The integrated presence sensor makes the Elevators virtually autonomous: heat will only be emitted when someone is detected and up to 10 minutes after leaving the bathroom. After this time, the LIFT will automatically set to ECO function (3,5 ° C less than set on the thermostat), and will return to the set comfort level, when a person is detected in the bathroom. This option is essential to ensure consistent energy savings and always guarantees a comfortable temperature.

You will find a warm and cozy bathroom, during the morning shower or bath.

The variable heating power of the LIFT bathroom radiator is its greatest advantage. The LIFT fan operates at full power (1800W) only when it needs to quickly raise the temperature from ECO to comfortable to maintain the achieved temperature, less power (1000W) is used. Combined with the Presence Sensor and Open Window - the WINDY bathroom heater can save up to 40% energy compared to traditional fan heaters.

Operating Modes of Bathroom Electric Heater ELEVATOR:

1. Antifreezing mode

The thermostat is set to 7 ± 3 ° C. The function is activated manually or automatically when no presence in the room is detected for at least 36 hours. In this case, as soon as the presence is detected again, the device will automatically set the automatic mode.

2. Programming mode

The product can be programmed by selecting, for each day of the week, 1 of the 5 ready-made profiles that we want to use. At all times in program mode, the presence sensor is switched off so that the LIFT can properly maintain a given temperature according to the temperature profile set by the user.

In Programming mode there is also a special function - activated at the user's request - that allows you to detect the possible opening of the window and go to antifreeze mode to minimize energy loss.

3. Automatic mode

The product is set to work at a comfortable temperature when someone is detected in the room. If it does not detect anyone in the room for at least 10 minutes, the heater will automatically set the Eco mode (3,5 ° C less than the set comfort temperature). If the presence in the room is not detected for more than 36 hours, the heater will automatically set the antifreeze mode (7 ° C). In the event that someone is detected again for at least 2 minutes, the product will automatically raise the temperature to the comfort level.

In automatic mode, there is also a special function - activated at the user's request - that allows you to detect the possible opening of the window and switch to antifreeze mode to minimize energy loss.

4. Basic mode

The product works in Comfort mode. Presence detection is disabled and does not affect the set temperature as in automatic mode.

In basic mode, there is also a special function - activated at the user's request - that allows you to detect the possible opening of the window and go to antifreeze mode to minimize energy loss.

5. Boost mode

The Boost button allows you to activate the time action for 15 minutes at maximum power without setting the temperature. The heater will heat all the time for 15 minutes. During this operation, the word "BooS" and the remaining time appear alternately on the display. After completing this forced operation, the heater returns to its previous operating mode.

The WINDY bathroom electric heater is equipped with a dust filter for cleaner air circulation and device protection, prevents overheating and guarantees a longer service life and reliability.

Thanks to the open window sensor, the LIFT will not allow unnecessary heat loss, setting automatically in "Frost Free" mode until the energy dispersion is interrupted.

Simple and convenient weekly programming thanks to 5 pre-set weekly programs, ELEVATOR provides additional help in reducing energy consumption: this innovative bathroom heater can thus adapt to the rhythm of life and schedules, distributing heat only when necessary.

The WINDY bathroom electric heater has double electrical insulation and IP 24 protection to protect the device from accidental splashes, so it can be installed in the bathroom and in humid places, without any risk.

The most important advantages of the FOLIO bathroom radiator:

• Pollen filter
• Easy installation
• Quiet operation
• Built-in touch-controlled weekly thermostat
• Presence sensor
• Open window sensor.
• Anti-freeze function
• Efficient heating element
• Efficient fan
• Two heating powers 1000W and 1800W
• Double electrical insulation, class II
• IP24 protection
• Cable length 1 m (100 cm) terminated with plug

Technical data:

Heating power: 1000 / 1800 W

Width: 32 cm

Height:58 cm

Thickness: 11,2 cm

Weight: 4 kg

Color - White

Installation: Wall

Power supply: 230 V / 50 Hz

Freezing protection: Yes 7°C

Presence Sensor: Yes

Open Window Sensor: Yes

Very low noise

Temperature setting: 10°C - 35°C

Degree of protection: IP24

Power cable: Yes, terminated with plug

Power cable length: 1 m (100 cm)

Producer - Ermete Guidici

Product Series - Aurora

Production - Italy

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With a VAT invoice
Parametry	Brand	Radialight
Parametry	Dominant color	silver/gray
Parametry	Model	WINDY 2B
Parametry	Kind	other
Parametry	Number of power levels	2
Parametry	Maximum power	1800 W
Parametry	Thermostat	electronic
Parametry	Functions	fan
Parametry	Product width	32 cm
Parametry	Product height	58 cm
Parametry	Product depth	11.2 cm
Parametry	Product weight	4 kg
Parametry	Product weight with unit packaging	4 kg
Parametry	Manufacturer code	WINDY 2B
Parametry	EAN (GTIN)	8019250595022