Vandens minkštinimo filtras 24L, geležies, mangano, amoniako šalinimas, MENU PL

Trumpai apie prekę

Prekė: Vandens minkštinimo filtras 24L, geležies, mangano, amoniako šalinimas, MENU PL. Kategorija: Vandens filtrai ir minkštikliai.

• Gamintojas: no brand
• Modelis: PURE MULTI BNT24_PM
• Talpa: 24 l

The PURE MULTI BNT24_PM multifunction system is a fully automatic, compact device that solves problems with as many as five of the most common contaminants found in water: iron, manganese, organic compounds, ammonia and water hardness.

The system contains 24 liters, excellent quality, multifunctional PURE MIX A deposit by BWG Components, which is a composition of five ingredients. The individual components create an excellent filtration surface. Each component of the deposit is responsible for removing other impurities present in the water.

Thanks to this, it is possible to remove the most common impurities from the water such as: iron, manganese, organic compounds, ammonia and hardness water.

The system in the offer is offered with a trouble-free, modern and user-friendly, control valve BNT1650 with menu in Polish and valve BY-PASS.

Every system model we offer is subjected to rigorous quality tests. A positive quality test allowed to obtain extended protection of the MANUFACTURER (not the seller).

Extended protection includes:

• 4 years per head,
• 10 years for cylinder and compact housing,
• 5 years for deposit multifunctional*
• 3 years for power supply and float valve.

• *in the case of a personal invoice, installation of a system for tap water and application in the form of protection of a mechanical filter and mandatory annual service.

Note! Devices with a head in white or gray are available for sale. We reserve the right to ship the device with the head in one of these colors, depending on the current availability.

VERY IMPORTANT! The device can work in well waters, from own intakes and tap waters.

In the PURE MULTI BNT24_PM systems, a pressure cylinder with a large cross-section has been used, thanks to which it provides even better and more accurate rinsing of the bed, and thus extends its service life.

The PURE MULTI BNT24_PM, system is equipped with an automatic, trouble-free, control head of the BNT1650 series from the in Polish. In the BNT1650 head, the main piston was protected with Teflon coating.

Thanks to the BNT1650 head, the device can operate in two modes, volume (regeneration occurs after the passage of a given volume of water) or time (regeneration occurs "X" days).

The set also includes a BY-PASS valve, which can be used to carry out maintenance work without blocking the supply of raw water to the installation. The brine float valve provides effective protection against possible flooding.

*Sample photo

Exclusion of liability:

The store does not provide individual selection of devices or assess their suitability for specific water parameters.

The purchase of the device is possible only after prior confirmation that the system is suitable for use on the basis of the current physicochemical analysis of water. This confirmation should be issued by the manufacturer, technologist, installation company or other entity with appropriate competences.

The role of the store is only to enable the purchase of the indicated device and the execution of the order. In the case of purchase without prior confirmation of selection, the seller is not responsible for improper operation of the device, its ineffectiveness or improper selection resulting from water parameters or installation conditions.

Only with us: free, lifetime technical support!

The PURE MULTI series devices are manufactured in Poland in a factory with 100% Polish capital. Before leaving the manufacturer's factory, each product is thoroughly examined and tested for possible leaks and technical defects. For each item sold, we provide a set of necessary documents that confirm its legality and originality. Please pay special attention to the fact that PURE MULTI BNT24_PM systems are offered with a certificate issued by the distributor (VILMART company, which confirms that the product is 100% original and comes from a legal source).

• invoice: which also constitutes a warranty document,
• certificate with a hologram: confirming the originality of the product.
• instructions for installation and commissioning of PURE devices.
• a sticker on the side of the head with the manufacturer's name: confirming the head's origin.
• hologram: located on the opposite side of the head than the manufacturer's sticker.
• nameplate: located on the top of the head with full distributor details.

Thanks to this, you can be sure that you are buying the original PURE MULTI BNT24_PM softener . You will find exactly the same hologram on the control head.

WARRANTY / CERTIFICATE

ATTENTION! VILMART IS A FAIR-PLAY COMPANY IN RELATION TO THE CUSTOMER. THE WARRANTY IS GIVEN ON THE BASIS OF THE ISSUED INVOICE AND ITS PERIOD RUNS FROM THE ACTUAL SALE DATE OF THE DEVICE, AND IS NOT REDUCED BY THE PERIOD THE PRODUCT SPENDS IN THE WAREHOUSE, AS IS SOMETIMES THE CASE OF OTHER SELLERS.

WE WOULD LIKE TO INFORM YOU THAT THERE ARE SIMILAR PRODUCTS ON THE MARKET THAT HAVE SIMILAR DESCRIPTIONS, TECHNICAL PARAMETERS, PHOTOS AND HOLOGRAMS. THESE PRODUCTS ARE NOT COVERED BY OUR EXTENSIVE MANUFACTURER WARRANTY PROGRAM (THEY HAVE A SELLER WARRANTY), AS WELL AS TECHNICAL SUPPORT AND SERVICE.

BNT1650 head advantages:

Wide range of regeneration modes:

• Volume delayed, volumetric immediate, temporal and temporal-volumetric.
• The ability to change the time of individual cycles, which can positively result in lower water consumption, lower flush emissions and lower consumption of the regenerator.
• Possibility of immediate regeneration.
• Possibility to interrupt the rinsing process at any time.
• No cut-off of the water supply to the installation during the regeneration process.

The controller is equipped with an LCD screen on which information such as the current time and volume of water remaining until the next regeneration are displayed.

When purchasing a softening system, it is worth considering the durability of all elements of the system.

The process of regeneration of the deposit occurs by rinsing with a salt solution. The entire operating cycle of the device is automatic and does not require user intervention (this is a process analogous to water softening).

Technical information:

• Head: BNT1650 volumetric (time programmable) with PL menu
• System Dimensions (H) x W x D. ): 1115 mm x 320 mm x 600 mm
• Cylinder: 10x35
• Number of beds: 24L PURE MIX A multifunctional bed
• Power supply: 220-240 V / 50-60 Hz (power consumption: 9W)
• Hydraulic connection: 1" BSP
• Operating temperature: 2 C - 39 C
• Operating pressure: 1,4 – 8,6 bar (pressure drop: 0,4 bar)
• Maximum flow rate: 1,8 m3/h
• Average salt consumption/bed regeneration: 4,5 kg
• Regeneration modes: volume delayed, volume instantaneous, temporal and temporal-volumetric
• Original BY-PASS valve with connection lock with the possibility of quick disassembly from the installation.
• Double anti-flood protection: float valve (cut-off) installed in the brine tank and overflow knee.
• Bottle with a larger cross-section guaranteeing better operation, efficiency of the device and better flushing of the deposit.
• Internal memory NOVARAM: maintaining head settings in case of power failure for 48 hours.
• Ability to work in time mode: hygienic protection forcing the regeneration of the deposit in case of prolonged non-use of the system.
• Backlit LCD panel displaying the necessary information such as: current date, time, as well as volume of filtered water for download, until the next regeneration mode,.
• Detailed instructions for assembly and programming.
• Full telephone support (before and after sales): remote, help our service during the first start-up of the device, as well as during the full life of the system.
• Free selection of the appropriate unit based on your water consumption, and full physico-chemical analysis of water.
• Feeding water: tap water/well water/water from own intakes*.

*to finally confirm whether the purchased device will meet your expectations and will work effectively on your water, please confirm with our employee. Please attach a full physicochemical analysis of the water to your application.

Please be advised that we have all consumables and spare parts in stock.

Safe, FREE transport on pallet, delivery guarantee without damage.

When deciding to buy a water softener or other larger device, it is worth taking care of its safe delivery. That is why we ship our products on a pallet. This ensures that the equipment reaches you intact.

During traditional courier shipping (e.g. in packages, the devices are repeatedly reloaded – from the car to the sorting room, from the conveyor belt to the next car, and along the way exposed to drops, bumps and crushing with other packages. This is when mechanical damage occurs most often.

• No multiple reloading – the pallet with the device is loaded and unloaded in its entirety, without the need to change or move.
• Stable protection – the product is immobilized, wrapped in stretch film and additionally protected against displacement.
• Protection against crushing – the device does not go to the conveyor belt or is laid under other packages.
• Professional service – pallet transport is treated as a size, so drivers and warehousemen handle them more carefully.

• original valve BY-PASS.
• Big Blue type pre-filter mounted in front of the station: High-performance Big Blue in-line body with 1″ connection diameter complete with plate and key
• 3 x foam cartridge type Big Blue, SUPREME: The cartridge made of polypropylene nonwoven fabric type Big Blue, is designed to reduce mechanical impurities such as sand, fine suspensions, corrosion products, impurities washed out of the surface of hydraulic installations, fats.
• 50 kg tableted salt (2 bags): The highest quality product designed for the regeneration of softening devices.
• 5 mb. flexible hose rinses: 5 mb. hose to power two drain lines.

Specifications