Vandens minkštiklis FERDOM FD404 su dozatoriumi ir 110 g polifosfato granulėmis

Trumpai apie prekę

Prekė: Vandens minkštiklis FERDOM FD404 su dozatoriumi ir 110 g polifosfato granulėmis. Kategorija: Filtrai ir vandens minkštikliai.

• Gamintojas: Ferdom
• Modelis: FD404
• Talpa: 0.2 l

+ 110g cartridge: Food grade polyphosphate (sodium polyphosphate)

Product of the British company FERDOM

Catalog number: FD404

Application:

- FERDOM dispensers prevent limescale and sediment build-up and protect water installations from corrosion.

- Protect boilers, heat exchangers, heating, washing machines, dishwashers, etc., prevent deposits on the fittings.

- The dose of the minimum amounts of FERDOM Ferdos (3-5mg / 1m3) with a chelating - sequestering effect.

- The set includes a cartridge of the preparation (balls) for about 30 m3, spare preparations are available (crystals FD805 and FD806). Easy wear control and preparation replacement.

- Boiler and heater manufacturers recommend protecting the installation when the water hardness exceeds 15° dh (hard / very hard).

Advantages:

- Drain valve for flushing out debris, without the need to remove the cartridge.

- Used for cold and hot water.

- Removes mechanical contaminants.

Dosonators - principle of operation:

FERDOM anti-sediment and anti-corrosion dispensers dose Ferdos proportionally (Italian production), which, thanks to its composition, creates a microscopic and anti-sediment membrane on metal surfaces, so that water has limited contact with metal surfaces. At the same time, the preparation forms a colloidal suspension that does not allow calcium and magnesium to precipitate (sediments).

The use of FD404, thanks to the polyphosphate contained in it (and then polyphosphate in the form of FD805 or FD806 crystals) does not reduce the hardness of water, only visible negative effects associated with water hardness are limited. Using this Polyphosphate Dosonator, we get the desired result of soft water - deposits on surfaces are limited, and at the same time the operation of the FD404 device is corrosion protection.

The preparation is dosed in microscopic amounts (3-5 parts per million). It is produced on the basis of food preparations. According to local regulations, it can also be used for drinking water (Italy UNI 8065).

Installation and use:

FERDOM dispensers are mounted on the supply of cold water to the building (recommended), or in front of a device that we want to protect, e.g. boiler, heater, etc. The FD404 model has a built-in By-Pass valve that allows you to cut off the water supply for the time of replacement of the preparation, so it can be mounted without shut-off valves. The FP611 and FP612 models should be fitted with shut-off valves. The FD404 model displayed at this auction can be mounted to pipes vertically or horizontally. After unscrewing 4 screws, disconnect the connection connector from the Dispenser, which can be set in the vertical or horizontal position, according to the direction of water flow (see illustration).

Scheme:

1. valve and By-Pass
2. Dosonator head (brass)
3. Vent (brass)
4. Ring (brass)
5. Enclosure (SAN)
6. Connections 2x1/2"gw
7. Gaskets (evoprene)
8. Polyphosphate balls (110g)
9. The Key to the Ring

TECHNICAL DATA:

• Connections: screws GW 1/2" (DN15), rotating vertical-level
• Performance of the attached cartridge: 110 grams per approximately 30 m3
• Flow rate: max 1,5 m3/h
• Dispensing: 4 p.p.m
• Working pressure: 3,5 bar/water
• Pressure loss: 0,2 bar
• Temperature range: operation: 3-35°C, ambient: 5-45°C
• Head: brass, nickel plated
• Reservoir: clear, blue, plastic SAN
• Equipment: By-Pass valve, cut-off and flow control
• Weight: 0,6 kg, with packaging 0,65 kg
• Available preparations for further use FD404: Ferdos crystals 0,45 kg for approximately 90-100 m3 of water [code FD805] ; Ferdos crystals 1,00 kg for approximately 200 m3 of water [code FD806]

Water hardness - impact on the system and fittings:

In most Polish territory (over 50%) water is hard or very hard. This has the following consequences; failures of boilers, heaters, heating systems, fittings, household appliances, etc. Sediments in boilers and exchangers also increase heating costs. Many manufacturers of fittings (e.g. boilers C.O.) recommends water treatment when hardness exceeds 15° dh (hard / very hard water)

Hardness also causes the formation of troublesome deposits on faucets, sanitary facilities or shower cabins and increases expenses on cleaning, cleaning and washing agents.

The hardness of water results from the sum of calcium and magnesium salts, which as a result of raising the temperature cause the formation of so-called deposits. boiler stone especially in places where there is the greatest thermal shock, such as: in boilers, exchangers, pipes, etc. This is due to a chemical reaction that causes the formation of calcium carbonate and carbon dioxide. Calcium carbonate precipitates, causing the fittings to encrust and block, while the carbon dioxide produced triggers the corrosive process.

Ferdos preparation based on sodium polyphosphate has an anti-corrosion and anti-sediment function - which, thanks to its composition, creates a microscopic and anti-sediment coating on the walls of fittings and pipes, and at the same time causes the formation of a colloidal suspension that does not allow calcium and magnesium ions to precipitate. Stopping the process of precipitation of ions reduces the amount of deposits and the amount of CO2 formation responsible for corrosion.

The included polyphosphate (110 g) is enough for 30 m3 of water. In a separate auction (with product code: FD805) you can buy a 0.45 kg package of polyphosphate crystals, which is enough for approximately 90-100 m3 of water. Separately (with product code: FD806) to purchase a package of polyphosphate crystals 1,00 kg, which is enough even for about 200 m3 of water.

Specifications