USB šakotuvas i-tec 10 jungčių, 48W, su įkrovimo funkcija ir maitinimo adapteriu

Trumpai apie prekę

Prekė: USB šakotuvas i-tec 10 jungčių, 48W, su įkrovimo funkcija ir maitinimo adapteriu. Kategorija: USB šakotuvai.

• Gamintojas: I-Tec
• Modelis: U3CHARGEHUB10

i-tec USB 3.0 Charging HUB 48W 10 ports with power adapter switches

i-tec

• Manufacturer: i-tec
• Type: hub
• standard: USB-A
• Tip 1: 10 x USB 3.0 socket (type A)
• Tip 2: 1 x USB 3.0 socket (type B)
• Type: active
• Dimensions: 151 x 53 x 24 mm
• Weight: 165 g
• additional information: included: USB-A / USB-B cable (100 cm), power adapter | power: 48 W
• Manufacturer code: U3CHARGEHUB10
• EAN: 8595611702945
• Product name: i-tec USB 3.0 Charging HUB 10 HUB Charging with 48W 10x USB 3.0 power supply (max. 10W) with 5 Gbps switches
• System code: USB-ITE-069

i-tec USB 3.0 Charging HUB 10 port

Our HUB offers ten USB 3.0 ports with Plug & Play and standard USB charging – it automatically detects whether a USB device is connected to charging. Since the HUB is equipped with ten USB 3.0 ports, it can charge up to ten devices simultaneously. The USB 3.0 interface is particularly important for transferring data from USB 3.0 memory cards and flash drives, where its high transfer rate is most useful. An external power supply is included to guarantee stable performance and charging from USB ports, providing up to 10W of charging power for each port.

Individual HUB ports can be turned on and off with the appropriate switch, saving HUB power consumption while increasing charging power on the ports you leave on.

This HUB does not require driver installation. You simply plug it in with a USB cable to your computer and you can start using it immediately. It has built-in overcurrent protection of the computer in case of short circuit in peripheral devices. The interface is compatible with USB 2.0/1.1.

The HUB is automatically detected and installed, no drivers required. Connect the AC adapter to the HUB and then to the 230 V socket. Then connect the HUB using a USB cable to a free USB port (USB 3.0, 2.0 or 1.1 standard) on your laptop/PC and follow the instructions displayed on the screen. The HUB will be installed and shown in Device Manager as “General USB Hub” and “General USB SuperSpeed Hub”.

Specifications