Suvirinimo aparatas TIG MMA MAGNUM 201 PULSE

Trumpai apie prekę

Prekė: Suvirinimo aparatas TIG MMA MAGNUM 201 PULSE. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Magnum
• Modelis: U I THF201P D

• ✅THF 201 PULS device
• ✅ SR26 welding torch 4m
• ✅ Ground cable 3m,
• ✅ Electrode cable 3m
• ✅User manual in Polish
• ✅Warranty card

• ✅Power supply: 230V/50Hz
• ✅Welding Current: 200A
• ✅Efficiency: 60%
• ✅Adjustment range: smooth
• ✅Housing protection: IP21
• ✅Power protection: 25A
• ✅Cooling: fan
• ✅Idle voltage: 56V

The THF 201P inverter device is a lightweight, portable power source. It is designed to work in field and stationary conditions, indoors and outdoors, and to perform all kinds of repair work. It is used wherever it is required to achieve excellent welding quality. The device is characterized by high efficiency of 200 A/60%. It has excellent arc characteristics for rutile and alkaline electrodes.

The device has a fully functional control panel, allowing you to set all welding parameters with the TIG DC method.

The device is also used for MMA welding - wrapped electrodes.

This model uses control based on a digital panel. This is the latest solution used in inverter welding machines.

For TIG welding, the possibility of pulsed current welding in TIG-DC and regulation of welding current pulsation parameters was used. Thanks to the pulsed welding function and the ability to adjust its parameters, we have an impact on the focus of the arc and the shape of the weld, as well as the possibility of welding thin sheets.

❎1. Main switch.

❎2. TIG/MMA welding method switch

❎3. Power Indicator Diode

❎4. Welding Current Adjustment Knob

❎5. Adjustment knob for the "current drop" function

❎6. Indicator diode overheating

❎7. Adjustment knob for "gas flow after welding" function

❎8. Switch function "pulse"

❎9. Negative polarity socket (TIG)

❎10. Protective gas outflow socket

❎11. TIG control socket

❎12. Positive polarity socket

❎1. Display

❎2. Diode indicating the operation of the protection system

❎3. MMA/TIG welding method switch

❎4. PULS function switch (subsequently from below: pulse-free TIG welding, high-frequency pulse TIG welding, low-frequency pulse TIG welding)

❎5. Gas outflow time adjustment after welding for TIG

❎6. Adjustable post-weld current drop time for TIG

❎7. Welding current adjustment for MMA and TIG

❎8. Output socket with negative polarity (TIG handle or mass for MMA)

❎9. Protective gas output for TIG

❎10. Control for TIG

❎11. Output socket with positive polarity (mass for TIG or electrode holder for MMA)

✅Negative polarity socket

✅Socket for TIG control plug

✅Protective gas outlet

✅Positive polarity socket

✅Power switch

✅Power Indicator Lamp

✅Welding method switch – TIG-MMA

✅Indicator lamp for overheating

✅Welding Current Adjustment Knob

Specifications