Suvirinimo aparatas TIG HF AC/DC TECNO TIG 215 200A 230V MMA

Trumpai apie prekę

Prekė: Suvirinimo aparatas TIG HF AC/DC TECNO TIG 215 200A 230V MMA. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: IDEAL
• Modelis: TECNO TIG 215

❗ PROFESSIONAL TIG INVERTER WELDING MACHINE - NECESSARY WHERE RELIABILITY COUNTS ❗

❗ AC DC ❗ PULSE ❗ 2T/4T ❗ TIG HF/LIFT ❗ MMA ❗

The IDEAL TECNO TIG 215 AC/DC welder is a portable power source, made in IGBT technology, intended for TIG and TIG PULS welding with alternating current ( AC ), direct current ( DC ), and the MMA method with an electrode coated with direct current ( DC ).

The device has TIG welding modes:

• TIG DC,
• TIG DC PULSE,
• TIG AC,
• TIG AC PULSE,

WITH TIG HF ARC STARTING AND TIG LIFT

The welder also enables MMA welding - lagging electrode.

WELDING MACHINE, THANKS TO ITS CONSTRUCTION AND NUMEROUS FUNCTIONS, ENABLES THE WELDING OF PRACTICALLY ALL WELDABLE METALS!

✔ The TIG DC and TIG DC PULS functions are used for welding stainless steel, carbon and low-alloy steels, copper and titanium.

✔ TIG AC and TIG AC PULS function : allows you to weld aluminum and its alloys and brass.

The IDEAL TECNO TIG 215 AC/DC welder is a modern inverter device equipped with new generation IGBT transistors. Thanks to this, despite the impressive power and maximum current of 200A , the welder impresses with its compact design and low weight, which is only about 9kg. These small sizes make the welder extremely mobile and allow you to work even in hard-to-reach places.

Intuitive, easy-to-use control panel allows for quick and precise selection of individual welding parameters.

It is equipped with a display showing the values of individual parameters, which can be adjusted using the knob and function buttons.

The welder is characterized by a wide range of applications, it is dedicated to all kinds of welding works in factories, industrial plants, locksmith workshops, repair workshops, etc.

The arc is struck in non-contact ( HF ) or touch ( LIFT ) mode. The LIFT function is used during welding in an environment with a high risk of electromagnetic interference in the environment.

Both with non-contact ignition HF and touch LIFT , we can choose the function of the button in the TIG torch between working in 2-step or 4-step mode (button lock for long welds).

⭐ PULS - thanks to the adjustment of the TIG PULS pulse welding parameters, we have an impact on the shape of the weld and the focus of the arc. Pulse welding also allows you to reduce the amount of heat supplied to the material and allows you to weld thin materials.

⭐ 2T/4T - source operation control modes. In a two-stroke, pressing the TIG torch button causes welding to start, releasing the button to end welding. In a four-stroke, pressing and releasing the button start welding, to finish it, press and release the button again. Four-stroke is mainly used when making long welds, because it does not require holding the button on the handle all the time during work.

⭐ HF IONIZER - enables contactless arc ignition using high frequencies. Thanks to this technological solution, it is possible to eliminate contamination of the weld with tungsten

DESCRIPTION OF THE CONTROL PANEL AND ITS FUNCTIONS:

A - Welding mode selection button

MMA MMA welding, TIG HF TIG welding with non-contact arc ignition, TIG LIFT TIG welding with touch arc ignition

B - Welding mode selection button

TIG AC welding, TIG DC welding

C - TIG torch mode selection button

2-step operation, 4-step operation

D - Knob for selecting welding parameters.

E - Digital display

F - "TIG SETTING LADDERS"

• GAS PRE - GAS INITIAL FLOW (1)
• START CURRENT (2)
• RISE CURRENT (3)
• WELDING CURRENT (4)
• BASE CURRENT (5)
• DROP CURRENT (6)
• END CURRENT (7)
• GAS END FLOW(8)
• PULSE LENGTH (9)
• PULSE FREQUENCY (10)
• In the TIG PULS welding mode (12) it allows you to set the pulse frequency. Adjustable 0.5- 200Hz.
• AC BALANCE (13)

THE WELDING MACHINE ALSO HAS A NUMBER OF FUNCTIONS TO FACILIZE MMA WELDING, SUCH AS:

✅ ANTI STICK - anti-short circuit function. In a situation where the welder makes a mistake during work and the electrode sticks to the welded material, the welding voltage and current will be cut off or reduced to a minimum level.

✅ ARC FORCE (short-circuit current adjustment) - facilitates the transfer of molten electrode drops to the welded material, preventing the extinguishing of the arc when the electrode drop touches the welding pool.

✅ HOT START (hot start adjustment) - facilitates ignition of the electrode by providing a higher welding current with each arc ignition

IDEAL TECNO TIG is perfect for:

✔ Industrial and construction production: In the production of machinery, equipment, vehicles, steel structures and other industrial products, TIG welders are indispensable. They are particularly useful where high precision and high quality welds are required.

✔ Construction: In construction, TIG welders are used to weld load-bearing structures, pipes and other structural components.

✔ Automation and Robotics: In industries that require precision welding, such as manufacturing robots and other precision equipment, TIG welders are often chosen for their accuracy.

✔ Aerospace: Due to the high demands on welding quality and precision, TIG welding machines are often used in the aerospace industry.

✔ Food & Pharmaceutical Industry : These industries use TIG welders to weld stainless steel pipes and tanks that must meet strict sanitation and hygiene requirements.

✔ Arts and crafts: For artists and craftsmen who work with metal, TIG welders offer the ability to create precise and aesthetic details.

⭐ TIG 26 SR GAS COOLED TORCH 4 meters long

Remote control in the handle!

The handle has an ergonomic shape, thanks to which it fits perfectly in the hand. The control button is located in the center of the handle.

The handle of the burner has special rubber inserts, thanks to which the handle lies firmly in the hand. The handle has a high-quality rubber cover that protects the cables against abrasion.

Its ergonomic design and flexible hoses increase the comfort of the welder's work.

⭐ MMA ELECTRODE CABLE 3m long,

⭐ MASS CABLE 3m long

When using an ordinary gas nozzle, the shielding gas is first reflected from the inner walls of the ceramic nozzle and then unevenly distributed over the working area. Using a gas lens, the gas is distributed evenly along the tungsten electrode straight to the working area through a special mesh, providing much better coverage of the weld.

The power source was built on the basis of IGBT (Insulated Gate Bipolar Transistor) transistors, which ensure minimum electromagnetic interference, low power losses in the basic systems, enabling increased efficiency and reliability of the power source.

Very high efficiency, which translates directly into lower energy consumption, and high switching frequency, ensure instant adjustment of the current to changes in parameters during welding.

The fan cooling system - activated only when necessary - reduces contamination inside the device.

TECNO TIG 215 AC DC by IDEAL is a device with a wide range of applications, designed as an inverter power source enabling welding using the following method:

✔ MMA

in the MMA method, a coated electrode is used, consisting of a metal core covered with a coating. An electric arc is generated between the end of the electrode and the material to be welded. The arc is ignited by touching the tip of the electrode to the workpiece. MMA welding is possible with both alternating and direct current.

✔ TIG

In the TIG (Tungsten Inert Gas) method, the electric arc is ignited in a shield of inert gas (argon), between the welded element and a non-consumable electrode made of pure tungsten or tungsten with additives.

Ignition of the welding arc in the TIG method is carried out by two methods :

• touch method by touching ( TIG Lift ) the electrode to the welded material, and then lifting it to a height of a few millimeters, which initiates the welding arc
• non-contact method ( TIG HF ) using an ionizer by bringing the electrode closer to the welded material.

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

Stainless steel:

This is one of the most popular uses for TIG welders. Stainless steel is relatively easy to weld using the TIG method. For stainless steel, it is generally recommended to use DC current. The current depends on the thickness of the material, but usually for thin materials (less than 1mm) about 5-50A is used, and for thick materials (over 1mm) from 50 to 200A.

Carbon and low alloy steel:

These materials can also be welded using the DC TIG method. As with stainless steel, the current depends on the thickness of the material.

Aluminum and aluminum alloys:

This is one of the applications for which AC current is used in TIG welding. AC current helps to keep the aluminum surface clean during the welding process because it has the ability to "break" the aluminum oxide layer, which is very hard and could adversely affect the quality of the weld. A current of 20-50A is usually recommended for thin materials, and 100-200A for thick materials.

Copper, bronze, nickel and their alloys:

These metals can also be welded using the TIG method. Usually it is recommended to use DC current. The current depends on the thickness of the material.

Titanium and Magnesium:

These metals are more difficult to weld, but can be welded using the TIG method. Usually DC current is used.

PHYSICAL PARAMETERS

• Degree of protection: IP 23
• Weight of the device / set: 9 / 13 kg
• Overall dimensions LxWxH: 620x270x300 mm

TECHNICAL PARAMETERS

• Current rise time (s): 0 - 10
• Current fall time (s): 0 - 10
• Pulse frequency Hz: 0.5 - 200
• Pulse length (%): 5 - 95
• Gas after (s): 0 - 10
• Gas before (s): 0 - 2
• Power: 6.1 kW
• Open-circuit voltage: 65V
• Final current: 10 - 200 A
• Maximum current: 200A 35%
• Current at 100%: 120 A (TIG AC) / 110 A (TIG DC/MMA)
• Current at 60% duty: 155 A (TIG AC) / 140 A (TIG DC/MMA)
• Starting current: 10 - 200 A (TIG AC) / 10 - 170 (TIG DC/MMA)
• Welding electrode diameter: 1.6 - 4.0 mm

POWER PARAMETERS

• Mains protection: C25 A
• Rated supply voltage: 230 V, 50-60 Hz, 1ph

BY BUYING FROM US YOU RECEIVE:

• INVERTER WELDING MACHINE IDEAL TECNO TIG 215 AC/DC
• TIG WELDING TORCH SR26 with remote control - 4m
• MMA ELECTRODE CABLE 3 m
• GROUND CABLE 3m
• GAS HOSE - 1 pc.
• MANUAL IN POLISH LANGUAGE
• WARRANTY CARD

(SET 15)

PRODUCT GALLERY :

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	IDEAL
Parametry	Device weight	9 kg
Parametry	Welding range	10–200 A
Parametry	Product weight with unit packaging	13 kg
Parametry	Manufacturer code	TECNO TIG 215
Parametry	EAN (GTIN)	4055333067059
Parametry	Welding methods	MMA,TIG