Suvirinimo aparatas SHERMAN MIG MMA TIG 200 POINT PULSE SYNERGY MEMORY 3IN1+CUP

Trumpai apie prekę

Prekė: Suvirinimo aparatas SHERMAN MIG MMA TIG 200 POINT PULSE SYNERGY MEMORY 3IN1+CUP. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Sherman
• Modelis: DIGIMIG 200 Pulse
• Ilgis: 495 mm
• Plotis: 210 mm
• Aukštis: 345 mm

WELDING MACHINE SHERMAN DIGIMIG 200 PULSE,

is an inverter semi-automatic welding machine designed for arc welding by the method

• MIG SYN - MIG-MAG welding using synergistic programs.
• MIG MAN - MIG-MAG welding with manual settings.
• MMA - Welding with wrapped electrodes
• TIG LIFT - Welding with a special handle with a valve, arcing is carried out by lightly rubbing the non-melting electrode against the welded material.
• FLUX / FCAW - Self-shielded wire welding.

WELDING MACHINE SHERMAN DIGIMIG 200 PULSE,

is an inverter semi-automatic welding machine designed for arc welding by the method

• MIG SYN - MIG-MAG welding using synergistic programs.
• MIG MAN - MIG-MAG welding with manual settings.
• MMA - Welding with wrapped electrodes
• TIG LIFT - Welding with a special handle with a valve, arcing is carried out by lightly rubbing the non-melting electrode against the welded material.
• FLUX / FCAW - Self-shielded wire welding.

When you make a purchase on this auction, you will receive a free thermal mug Sherman - 1 pc.

☕ THERMAL MUG SHERMAN – 350 ML

➡ The Sherman thermal mug with a capacity of 350 ml is a practical solution for people who value comfort, durability and elegant design.

➡ Perfect for work, travel, in the car or during walks.

➡ Made of high quality stainless steel, the cup provides very good thermal insulation. Thanks to double walls, it effectively maintains the temperature of the drink – both hot and cold – for a long time.

➡ Your coffee ☕ or tea 🍵 will stay pleasantly warm even for several hours.

WELDING TORCH WITH REMOTE CONTROL

The welder is equipped with a unique MIG handle with a knob in the handle, allowing remote adjustment of the welding current when operating in synergistic mode.

• Handle type: TW-15
• Maximum current capacity: 200 A (CO2)
• Type of cooling: gas
• Cooling gas flow: 10-18 l/min
• Length: 3 m

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

The clear display allows for precise adjustment of the device, even in very bright lighting.

The panel includes m.in :

1. WIRE INCH button for quick wire feed
2. Protective gas button
3. Source control button - 2T / 4T / S2T / S4T / SPOT / CPOT
4. Synergic program selection button - FE Co2 / AIMG5 / FE MIX / AISI5 / E308 / E316
5. ( L-left) (R-right) adjustment knobs and welding parameter diagram from the ladder
6. Welding method selection button - SYN MIG / PULSE / D-PULSE / SPL MIG / PULSE TIG / LIFT TIG / PULSE MMA / MMA
7. Electrode wire diameter selection button 0.8/1.0/1.2
8. LOAD button for loading settings
9. SAVE button for saving settings

LIST OF SYNERGISTIC PROGRAMMES:

• Fe CO2 - program for welding black steel in CO2 gas shield
• Fe MIX - a program for welding black steel in an Ar/ CO2 mixture cover. The recommended proportions of the mixture are 82% Ar 18% CO2.
• AlMg5 - AR argon sheathed aluminum welding program
• AlSi5 - AR argon sheathed aluminum welding program
• E308 - welding of stainless steels in Ar/ CO2 mixture cover. The recommended proportions of the mixture are 98% Ar 2% CO2.
• E316 - welding of stainless steels in Ar/ CO2 mixture cover. The recommended proportions of the mixture are 98% Ar 2% CO2

⭐ SYNERGY - is a very helpful feature available in professional welding equipment class PREMIUM. By setting the appropriate program or entering parameters, the device will independently select most welding settings, such as wire feed speed or appropriate voltage, according to the programmed data.

⭐LUTOSPELING - is a method that is quite similar to MIG/MAG welding, but the energy supplied in this case is much less. This means that soldering is used to join thin sheets covered with a layer of zinc. The described method is a bonding process during which solder melts, not the material we work with.

⭐ PULS - Welding with pulsating current, in which high and low current are alternately used. This reduces overall heat supply and splatter while providing greater resistance to non-melting. This method can be used to weld both metals with high thermal conductivity and thinner metals without burning them. Additionally, you can get narrower and more penetrating welds on thicker metals

⭐ DOUBLE PULSE - By welding using the MIG/MAG method with a double pulse, we obtain a high level of face appearance (husk effect). The MIG/MAG method with double pulse allows you to adjust the current pulsation (pulse balance) and adjust the wire feed speed. Thanks to this, we improve the appearance of the weld. When welding with dual pulse MIG/MAG, current pulses occur in two ranges

⭐ WELDING TIG WITH PULSE - consists in temporary impacts of a larger current, during which a drop of metal from the electrode wire is broken and moved to the weld. The current has once descending characteristics, once increasing, with a constant set frequency. .

⭐ SPOT WELDING - It consists in making small area of joining materials of small thickness. Most often, spot welding of sheet metal is carried out. This procedure is also referred to as one-sided welding.

• with the possibility of setting the welding time at the SPOT point
• CPOT cyclic spot welding.

⭐ CONTROL PANEL - The welding machine is equipped with an easy-to-use control panel and LCD display, so it can be used even by amateurs.

⭐ EUROCONNECTOR - allows you to quickly change the handle and allows you to change the polarity for welding with self-shielding wire.

⭐ SPOOL GUN CONNECTOR - allows you to connect a special handle with space for an additional spool with wire.

⭐ TWO-BAR 2T - pressing the button initiates gas outflow and welding current, releasing the button turns off welding current and gas outflow

⭐ FOUR-BAR 4T - pressing and releasing the handle button initiates gas outflow and welding current, re-pressing and releasing the button turns off the welding current and gas outflow.

⭐ S2T - Special double bar with hot start and final current filling the crater

⭐ S4T - Special four-bar with hot start and final current

⭐GAS TEST function that allows you to switch on the solenoid valve itself without switching on the power source and wire feeder (this function is used to determine the value of the shielding gas flow and check the patency of the gas circuit.

⭐ SETTINGS MEMORY - The device has memory of the last settings, i.e. When disabled and re-enabled, the last set parameters are restored. The welder also allows you to save 35 sets of parameters.

⭐POST GAS - regulation of gas outflow time after welding arc extinction. This is a helpful feature to cover the welding lake. Lack of additional gas shield may result in oxidation of the weld

⭐PRE GAS – gas outflow before arcing. Protects the lake from the harmful effects of atmospheric air. Regulation expressed in seconds.

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

IN ADDITION, THE DEVICE HAS THE FOLLOWING FUNCTIONS TO SUPPORT WELDING:

✅ ARC FORCE: facilitates the transfer of a drop of molten electrode to the welded material, preventing the arc from being extinguished when the drop of electrode contacts the welding lake

✅ MMA PULSE: pulsation adjustment allows for higher weld quality and less chipping and welding dust by controlling the temperature and density of the welding current.

✅ HOT START: facilitates the ignition of the electrode by providing more welding current with each arc.

✅ VRD - is a voltage reduction system whose task is to turn off the power supply within a few milliseconds after finishing welding. This function is also responsible for reducing the voltage on the wrapped electrode to a safe level.

✅ BURN BACK - WIRE BURNING FUNCTION - It is possible to adjust the time for which the voltage at the output of the device still occurs after stopping wire feeding. This feature prevents the welding wire from getting stuck in the welded material and prepares the end of the wire for the next arc. Higher function values cause the wire to burn closer to the current tip.

✔ REPAIR WORKSHOP

✔ LOCKSMITH WORKSHOP

✔ FACTORIES

✔ FARMS

✔ HOMEWORK

AND WHEREVER RELIABILITY MATTERS!

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

EFFICIENT OPERATION THANKS TO PROFESSIONAL WIRE FEEDER

The welder is equipped with a professional wire feeder, which guarantees stability and continuity of operation of the device.

The 2-roll feeder allows precise extension of the welding wire excluding its slippage.

The feeder has a quick wire change knob as well as a wire feed roller.

The device has a quick wire extension function. Pressing the WIRE INCH button on the panel causes a quick extension of the wire allowing it to be easily inserted into the handle

HANDLE WITH EURO CONNECTOR

The welder has a EURO socket for MIG welding wire. The socket allows you to quickly change the handle to the same standard

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

Inductance adjustment allows optimization of arc characteristics depending on the thickness of the welded element and the welding method and conditions.

The function is useful during MIG/MAG welding of thin elements, preventing them from burning out and soldering galvanized elements.

The thinner the MIG/MAG welded element, the higher the inductance (soft arc - less melting), for thick elements vice versa (hard arch - greater melting).

The standard neutral inductance setting is in the middle of the scale.

Changing the inductance value also reduces the amount of welding chips during CO2 shielded welding.

The optimal setting of the inductance value depends on several factors and may differ from the standard recommendations, it should be selected during welding tests by manipulating the potentiometer knob.

THANKS TO THE INDUCTANCE ADJUSTMENT, THE WELDING MACHINE IS SUITABLE FOR SOLDERING

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

BASED ON OUR MANY YEARS OF EXPERIENCE AND TO MEET THE NEEDS OF OUR CUSTOMERS, WE HAVE CREATED PROFESSIONAL KITS THAT PROVIDE YOU WITH EQUIPMENT READY TO USE IMMEDIATELY AFTER PLUGGING IT IN.

⌚ SAVE YOUR TIME ⌚

BUY A KIT AND WE'LL TAKE CARE OF THE REST!

JOIN THE BEST - START YOUR WELDING ADVENTURE WITH US!

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

☀ VERSATILITY OF THE DEVICE ☀

Migomat company SHERMAN is a device with a wide range of applications, designed as an inverter power source enabling welding with hot melt wire in a gas shield MIG/MAG or FCAW self-shielding wire (after changing polarity), welding with a buffer electrode MMA, as well as the TIG Lift method.

✔ MIG/MAG welding

Arc welding in gas shields is one of the most commonly used processes for the manufacture of welded structures. The semi-automatic welding process involves melting the edges of the welded object and the material of the hot melt electrode with the heat of an electric arc glowing between the electrode in the form of a solid wire and the welded detail, in an inert or active gas shield.

✔ Welding MMA

In the MMA method, a wrapped electrode is used, consisting of a metal core covered with a sheath. An electric arc is produced between the end of the electrode and the welded material. Arching is created by touching the end of the electrode to the welded material.

✔ Welding TIG LIFT DC

In the TIG (Tungsten Inert Gas) method, the electric arc is ignitioned in an inert gas (argon) shield between the welded element and the non-melting electrode, made of pure tungsten or tungsten with additives. In TIG DC Lift mode, the arc glow occurs when the electrode comes into contact with the welded element. In TIG DC mode, the current is constant.

❗❗ TIG method can be welded after connecting an additional handle, available at our auctions ❗❗

✔ Self-shielding wire welding FCAW

Thanks to the polarity change function, it is possible to weld without shielding gas, with FCAW self-shielding wire. The wire is designed for general production work, also in field conditions, and for welding structures that are not subject to impact requirements. Welding current DC(-).

Self-shielding powder wire fi 0,8mm/1kg E71T-GS is designed for welding ordinary carbon steels and increased strength not exceeding 510 MPa.

It is used in prefabrication, construction, tank production, agricultural equipment, etc. Used in both production and repair of equipment.

SELF-SHIELDED WIRE IS AVAILABLE SEPARATELY AT OUR AUCTIONS AND IN OTHER SETS

⭐WORK IN INDUSTRY - thanks to its high quality and multifunctionality, the device can be used in professional and hobby work

⭐PROFESSIONAL WIRE FEEDER - enables precise extension of the welding wire excluding its slippage, guarantees stability and continuity of operation of the device.

⭐ INVERTER TECHNOLOGY IGBT - is a modern technology based on bipolar transistors with an isolated gate. It combines the ease of control of field transistors with high breakdown voltage and switching speed of bipolar transistors. The use of IGBT technology has the effect of significantly extending the reliable operation of welding equipment.

➡ The device is equipped with overload protection, which increases its reliability.

❄ The device has a fan cooling system which significantly increases its efficiency.

TECHNICAL DATA:

• Power supply voltage: × 230 V; 50Hz (1ph)
• Maximum power consumption: 7,7 kVA
• Voltage without load: 56 V (9V with VRD)
• Power at work 100% - 155A
• Power at work 60% - 200A
• Wire diameter: 0,6 - 1,0
• Diameter of welding electrode: 1,6 - 4,0 mm
• Maximum power consumption : 32 A
• Network security : 25 A

MIG PARAMETERS:

• Welding current MIG [A]: 24 – 200 A
• Maximum current consumption [A] : 26,5
• Welding voltage:17,5 – 24,7 V
• Pulse frequency: 0,5 – 5 Hz.
• Type of feeder: built-in, 2 - roller
• Wire feed speed: 2 – 14 m/min
• Wire spool: ≤ 5[kg], ø200
• Spool diameters with wire: 100mm, 200mm
• Working cycle [%]: 60

TIG PARAMETERS:

• TIG welding current [A]: 10 – 200
• Maximum current consumption [A]: 21,5 A
• Welding TIG: Tig DC Lift
• Pulse frequency: 0,1 – 99 Hz
• Working cycle [%]: 60

PARAMETERS MMA:

• MMA welding current [A]: 20 – 200
• Maximum current consumption [A] : 33,7
• Pulse frequency: 0,1 – 99 Hz
• Working cycle [%]: 60

OTHER:

• Weight: 12 kg
• Dimensions [mm]: 495 x 210 x 345 [mm]
• Degree of protection: IP21

WHEN YOU BUY FROM US, YOU WILL RECEIVE:

• WELDING MACHINE SHERMAN DIGIMIG 200 PULSE - 1 pcs.
• Welding torch - MIG 15/3m with control - 1 pc.
• Electrode holder - 2/m - 1pc
• Bulk cable - 2/m - 1pc.
• Current tip - 0.8/1.0 - 2pcs
• Wire guide roller for aluminium - 1,0/1,2 mm - 1 pcs
• Wire guide roller for steel mounted - 0.8/1,0 mm-1pcs
• INSTRUCTION FOR OPERATING in Polish
• WARRANTY CARD

+ FREE Thermal mug Sherman - 1 pc.

SET OF 1

Specifications