Suvirinimo aparatas SHERMAN DIGIMIG 200 Pulse Synergy Spot

Trumpai apie prekę

Prekė: Suvirinimo aparatas SHERMAN DIGIMIG 200 Pulse Synergy Spot. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Sherman
• Modelis: Sherman_DIGIMIG_200_PULSE_230V
• Ilgis: 495 mm
• Plotis: 210 mm
• Aukštis: 345 mm

+ MIG/MAG, MMA WELDING SET, INCLUDING:

✅ WELDING ACCESSORIES

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

SHERMAN DIGIMIG 200 PULSE WELDING MACHINE,

is an inverter semi-automatic welding machine designed for arc welding

• MIG SYN - MIG-MAG welding with the use of synergic programs.
• MIG MAN - MIG-MAG welding with manual settings.
• MMA - Welding with coated electrodes
• TIG LIFT - Welding using a special handle with a valve, the arc is ignited by lightly rubbing the non-melting electrode against the welded material.
• FLUX / FCAW - Welding with self-shielding wire.

The SHERMAN DIGIMIG 200 PULSE welding machine is used for welding:

✔ low alloy steels

✔ low carbon steel

✔ alloy steels

✔ other weldable metals and alloys

✔ aluminum and its alloys

The device has been designed for all kinds of welding work in automotive, locksmith, repair, industrial workshops , etc.

WELDING TORCH WITH REMOTE CONTROL

The welder is equipped with a unique MIG torch with a knob in the handle, enabling remote adjustment of the welding current when working in synergic mode.

• Handle type: TW-15
• Maximum current carrying capacity: 200 A (CO2)
• Type of cooling: gas
• Cooling gas flow: 10-18 l/min
• Length: 3m

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

The easy-to-read display allows precise adjustment of the device, even in very strong lighting.

The panel m.in.

1. WIRE INCH button for quick wire inch
2. Protective gas button
3. Source control button - 2T / 4T / S2T / S4T / SPOT / CPOT
4. Synergy program selection button - FE Co2 / AIMG5 / FE MIX / AISI5 / E308 / E316
5. Knobs ( L-left) (R-right) of adjustment and graph of welding parameters from the ladder
6. Welding method selection button - SYN MIG / PULSE / D-PULSE / SPL MIG / PULSE TIG / LIFT TIG / PULSE MMA / MMA
7. Electrode wire diameter selection button 0.8/1.0/1.2
8. LOAD button for loading settings
9. SAVE button to save settings

LIST OF SYNERGY PROGRAMS:

• Fe CO2 - a program for welding black steel in a CO2 gas shield
• Fe MIX - a program for welding black steel in an Ar/CO2 mix shield. The recommended mix ratio is 82% Ar 18% CO2.
• AlMg5 - program for welding aluminum in AR argon shield
• AlSi5 - program for welding aluminum in AR argon shield
• E308 - welding of stainless steels in the shielding of the Ar/CO2 mixture. The recommended mix ratio is 98% Ar 2% CO2.
• E316 - welding of stainless steels in the shielding of the Ar/CO2 mixture. The recommended mix ratio is 98% Ar 2% CO2

⭐ SYNERGY - this is a very helpful function available in professional PREMIUM class welding devices. By setting the appropriate program or entering parameters, the device will independently select most of the welding settings, such as wire feed speed or appropriate voltage, in accordance with the programmed data.

⭐ BRAZING - a method that is quite similar to MIG / MAG welding, but the energy supplied in this case is much lower. This causes that brazing is used to connect thin sheets covered with a layer of zinc . The described method is a bonding process during which the solder is melted, not the material we are working with .

⭐ PULS - Welding with pulsed current, in which high and low currents are applied alternately. This reduces overall heat input and spatter while providing greater resistance to lack of penetration. This method can weld both metals with high thermal conductivity and thinner metals without burning them. In addition, narrower and more penetrating welds can be achieved on thicker metals

⭐ DOUBLE PULSE - By welding with the MIG / MAG method with a double pulse, we obtain a high level of face appearance (scale effect). The MIG / MAG method with double pulse allows you to adjust the pulsation of the current (pulse balance) and to adjust the wire feed speed. Thanks to this, we improve the appearance of the weld. During double pulse MIG/MAG welding, the current pulses occur in two ranges

⭐ TIG WELDING WITH PULSE - consists of temporary hits of a higher current, during which a drop of metal is broken from the electrode wire and moved to the weld. The current has a descending characteristic, and an increasing one, with a constant set frequency. .

⭐ SPOT WELDING - It consists in performing a small area of joining materials with a small thickness. Most often, spot welding of sheets is carried out. This procedure is also referred to as one-sided welding.

• with the option of setting the welding time at the SPOT point
• CPOT cyclic spot welding.

⭐ CONTROL PANEL - the welder is equipped with an easy-to-use control panel and LCD display, so it can be used even by amateurs.

⭐ EURO CONNECTOR - allows you to quickly change the handle and allows you to change the polarity for welding with self-shielding wire.

⭐ SPOOL GUN CONNECTOR - allows you to connect a special handle with space for an additional wire spool.

⭐ TWO-STROKE 2T - pressing the button initiates gas flow and welding current, releasing the button turns off welding current and gas flow

⭐ FOUR-TAKT 4T - pressing and releasing the handle button initiates the gas flow and welding current, pressing and releasing the button again turns off the welding current and gas flow.

⭐ S2T - Special two stroke with hot start and end current crater filling

⭐ S4T - Special four stroke with hot start and end current

⭐GAS TEST function that allows you to switch on the solenoid valve alone without switching on the power source and wire feeder (we use this function to determine the value of the shielding gas flow and check the patency of the gas circuit.

⭐ MEMORY OF SETTINGS - The device has a memory of the last settings , i.e. after switching off and on again, the last set parameters are restored. The welder also allows you to save 35 sets of parameters.

⭐ POST GAS - gas flow time adjustment after extinguishing the welding arc. This is a helpful feature to shield the weld pool. Lack of additional gas shield may result in oxidation of the weld

⭐PRE GAS - gas flow before arc ignition. It protects the pond against the harmful effects of atmospheric air. Adjustment expressed in seconds.

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

IN ADDITION, THE DEVICE HAS THE FOLLOWING FUNCTIONS TO SUPPORT WELDING:

✅ ARC FORCE : facilitates the transfer of a drop of molten electrode to the welded material, preventing the extinction of the arc when the electrode drop comes into contact with the weld pool

✅ MMA PULSE : the regulation of pulsation allows you to obtain a higher quality weld and less spatter and welding dust by controlling the temperature and welding current density.

✅ HOT START : makes it easier to ignite the electrode by providing more welding current with each arc ignition.

✅ VRD - is a voltage reduction system whose task is to turn off the power within a few milliseconds after finishing welding. This function is also responsible for reducing the voltage on the covered electrode to a safe level.

✅ BURN BACK - WIRE BURN FUNCTION - It is possible to adjust the time during which the voltage at the output of the device is still present after stopping the wire feeding. This function prevents the welding wire from getting stuck in the workpiece and prepares the end of the wire for the next arc strike. Higher values of the function cause the wire to burn closer to the contact tip.

✔ REPAIR WORKSHOPS

✔ LOCKWORKS

✔ FACTORY

✔ FARMS

✔ HOMEWORK

AND WHEREVER RELIABILITY COUNTS!

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

EFFICIENT WORK WITH A PROFESSIONAL WIRE FEEDER

The welder has been equipped with a professional wire feeder, which guarantees the stability and continuity of operation of the device.

The 2-roll feeder enables precise advancement of the welding wire , excluding its slippage.

The feeder has a quick wire change knob as well as a wire feeding roller.

The device has a quick wire feed function. Pressing the WIRE INCH button on the panel causes a quick wire feedout for easy insertion into the holder

HANDLE WITH EURO CONNECTOR

The welder has a EURO socket for the MIG welding cable. The socket allows you to quickly change the handle in the same standard

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

Inductance adjustment allows you to optimize the arc characteristics depending on the thickness of the welded element and the welding method and conditions.

The function is useful during MIG/MAG welding of thin elements, preventing their burn-through and braze welding of galvanized elements.

The thinner the MIG/MAG welded element, the higher the inductance should be (soft arc - less penetration), for thick elements the opposite (hard arc - greater penetration).

The standard neutral inductance setting is in the middle of the scale.

Changing the inductance value also reduces the amount of welding spatter during welding in the CO2 shield.

The optimal setting of the inductance value depends on several factors and may differ from the standard recommendations, it should be selected during welding tests by manipulating the potentiometer knob.

THANKS TO THE ADJUSTMENT OF INDUCTION, THE WELDING MACHINE IS SUITABLE FOR BRAZING

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

MEETING CUSTOMERS, BASED ON OUR MANY YEARS OF EXPERIENCE, WE CREATE PROFESSIONAL KITS FOR YOU, THANKS TO WHICH WE SUPPLY EQUIPMENT READY FOR USE IMMEDIATELY AFTER CONNECTING TO POWER.

⌚ SAVE YOUR TIME ⌚

BUY IN A SET AND WE DO THE REST!

JOIN THE BEST - START YOUR WELDING ADVENTURE WITH US!

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

• Professional gloves - 1 pair
• Anti-spatter spray - 1 pc.
• Magnetic square - 11 kg - 1 pc.
• Welding wire 5 kg 0.8 mm - 1 pc.
• Contact tip 0.8 mm - 5 pcs.
• Gas nozzle for the handle - 2 pcs.
• Power socket - 2 pcs.
• Insulator - 2 pcs.
• Pack of electrodes - 1kg

☀ VERSATILITY OF THE DEVICE ☀

The SHERMAN Migomat is a device with a wide range of applications, designed as an inverter power source enabling welding with MIG / MAG gas-shielded or FCAW self-shielding wire (after changing the polarity), welding with the MMA lagging electrode, as well as with the TIG Lift method

✔ MIG/MAG welding

Gas-shielded arc welding is one of the most widely used processes for the production of welded structures. The semi-automatic welding process consists in fusing the edges of the welded object and the material of the consumable electrode with the heat of an electric arc glowing between the electrode in the form of a solid wire and the welded detail, in an inert or active gas shield.

✔ MMA welding

in the MMA method, a coated electrode is used, consisting of a metal core covered with a coating. An electric arc is generated between the end of the electrode and the material to be welded. The arc is ignited by touching the tip of the electrode to the workpiece.

✔ TIG LIFT DC welding

In the TIG (Tungsten Inert Gas) method, the electric arc is ignited in a shield of inert gas (argon), between the welded element and a non-consumable electrode made of pure tungsten or tungsten with additives. In the TIG DC Lift mode, the arc is ignited when the electrode contacts the workpiece. In TIG DC mode, the current is constant.

❗❗ You can weld with the TIG method after connecting an additional handle, available at our auctions ❗❗

✔ Welding with FCAW self-shielding wire

Thanks to the polarity reversal function, it is possible to weld without shielding gas with FCAW self-shielding wire. The wire is intended for general production works, also in field conditions, and for welding structures that are not subject to impact resistance requirements. DC(-) welding current.

Self-shielding cored wire fi 0.8mm / 1kg E71T-GS is intended for welding ordinary and high-strength carbon steels not exceeding 510 MPa .

It is used in prefabrication, construction, production of tanks, agricultural equipment , etc. Used both in the production and repair of devices.

SELF SHIELD WIRE IS AVAILABLE SEPARATELY AT OUR AUCTIONS AND IN OTHER SETS

⭐ WORK IN THE INDUSTRY - thanks to the high quality and multi-functionality, the device can be used in professional and hobby works

⭐PROFESSIONAL WIRE FEEDER - enables precise advancement of the welding wire, excluding its slippage, guarantees stability and continuity of operation of the device.

⭐ IGBT INVERTER TECHNOLOGY - is a modern technology based on bipolar transistors with an insulated gate. It combines the ease of control of field effect transistors with the high breakdown voltage and switching speed of bipolar transistors. The use of IGBT technology significantly extends the reliable operation of welding equipment .

➡ The device is equipped with overload protection , which increases its reliability.

❄ The device has a fan cooling system , which significantly increases its efficiency.

TECHNICAL DATA :

• Supply voltage: × 230V; 50Hz (1ph)
• Maximum power consumption : 7.7kVA
• No-load voltage: 56V (9V with VRD)
• Current at 100% operation - 155A
• Current at 60% operation - 200A
• Wire diameter: 0.6 - 1.0
• Welding electrode diameter: 1.6 - 4.0 mm
• Maximum current consumption: 32 A
• Mains protection : 25A

MIG PARAMETERS:

• MIG welding current [A]: 24 - 200 A
• Maximum current consumption [A]: 26.5
• Welding voltage : 17.5 - 24.7 V
• Pulse frequency: 0.5 - 5 Hz.
• Feeder type: built-in, 2 - roll
• Wire feed speed : 2 - 14 m/min
• Wire spool: ≤ 5[kg], ø200
• Wire spool diameters : 100mm, 200mm
• Duty cycle [%]: 60

TIG PARAMETERS:

• TIG welding current [A]: 10 - 200
• Maximum current consumption [A]: 21.5 A
• TIG Welding: Tig DC Lift
• Pulse frequency: 0.1 - 99 Hz
• Duty cycle [%]: 60

MMA PARAMETERS:

• MMA welding current [A]: 20 - 200
• Maximum current consumption [A]: 33.7
• Pulse frequency: 0.1 - 99 Hz
• Duty cycle [%]: 60

THE REMAINING:

• Weight: 12 kg
• Dimensions [mm]: 495 x 210 x 345 [mm]
• Degree of protection: IP21

BY BUYING FROM US YOU WILL RECEIVE:

• SHERMAN DIGIMIG 200 PULS WELDING MACHINE - 1 pc.
• Welding torch - MIG 15/3m with control - 1 pc.
• Electrode holder - 2/m - 1 pc.
• Ground cable - 2/m - 1 pc.
• Contact tip - 0.8/1.0 - 2 pcs.
• Wire guide roll for aluminum - 1.0/1.2 mm - 1 pc.
• Wire guide roll for steel mounted - 0.8/1.0 mm-1pc
• MANUAL IN POLISH LANGUAGE
• WARRANTY CARD

+ MIG/MAG + MMA WELDING SET:

• Professional welding gloves - 1 pair
• Welding wire 5 kg 0.8 mm - 1 pc.
• Anti-spatter spray - 1 pc.
• Magnetic square - 11 kg - 1 pc.
• Current tip - 5 pcs.
• Gas nozzle for the handle - 2 pcs.
• Power socket - 2 pcs.
• Insulator - 2 pcs.
• Pack of electrodes - 1kg (2.5 or 3.2mm to choose from)

SET 2

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Sherman
Parametry	Wire diameter (mm)	0,6-1,0
Parametry	Welding range	24–200 A
Parametry	Height	345 mm
Parametry	Length	495 mm
Parametry	Width	210 mm
Parametry	Manufacturer code	Sherman_DIGIMIG_200_PULSE_230V
Parametry	EAN (GTIN)	5906372629496