Suvirinimo aparatas PATON PSI 160, 230V, 160A, MIG/MAG/MMA/TIG DC

Trumpai apie prekę

Prekė: Suvirinimo aparatas PATON PSI 160, 230V, 160A, MIG/MAG/MMA/TIG DC. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Paton
• Modelis: StandardMIG-160
• Ilgis: 350 mm
• Plotis: 250 mm
• Aukštis: 298 mm

• Welding methods: MIG/MAG, MMA, TIG DC, FLUX, SOLDERING
• Power supply: 230V
• Operating cycle 45% at maximum welding current 160A
• For welding: stainless and acid-resistant steel, aluminium alloys
• PULS in all welding methods
• Smooth adjustment of parameters/wire feed speed/inductance
• Modes and functions: 2T/4T, gas test, HOT START, ANTI-STICK, VRD, reset settings, PRE-GAS/POST-GAS
• Adaptive speed of fan
• Protection against voltage drops
• Stabilisation of work
• Overheating protection
• Clean, aesthetic welds
• Made in IGBT technology

✔ FEATURES AND ADVANTAGES:

• 2 TAKT - welding begins after pressing and ends after releasing the button,

• 4 TAKT - welding begins after the first press and release of the button, and ends after pressing again; more convenient with longer welds,

• INDUCTION ADJUSTMENT - the introduction of less heat prevents sheet deformation and damage to the zinc layer,

• LUTOSPELING - a method that uses less energy; for joining thin galvanized sheets, stainless steels, and various types of joints,

• PULS - welding of very thin elements, reducing arc linear energy and the risk of overheating/burning of materials; welds are better quality,

• FLUX - arc welding with powder wire without the use of a gas cylinder; self-shielding wire is filled with flux or a chemical that generates protective gases,

• HOT START - a temporary increase in welding current during arcing; prevents "sticking of the electrode", facilitates the start of welding,

• ANTI-STICK - allows easy separation of the electrode from the welded material; in case of short circuit, the welding current is automatically reduced,

• VRD - reduces the voltage on the electrode to a safe level after welding,

• PRE-GAS/POST-GAS - protects the welding lake from the harmful effects of atmospheric air,

• OVERLOAD SWITCH - protects against overvoltage, cutting off power to protect the network and device from damage,

• RESET SETTINGS - the ability to restore the factory settings of the welding machine,

• IGBT- bipolar transistors increase the efficiency and reliability of the device, ensure lower power consumption.

⚙ TECHNICAL SPECIFICATION:

• Power supply: 230V 50/60Hz (1ph)
• Welding current MIG MAG: 8 - 160A
• Efficiency: 45%
• Welding current in cycle 45%: 160A
• Welding current in cycle 100%: 107A
• Idle voltage: 12/75V
• Max. power consumption: 5,5 kVA
• Working temperature range: from - 25 ºС to +45 ºС
• MIG/MAG wire diameter: 0,6 - 1,0 mm
• Diameter of wrapped electrode: 1,6 - 4,0 mm
• Max. wire spool: 5 kg
• Housing protection: IP21
• Dimensions: 42 х 24.5 х 29.8 cm
• Weight: 11kg

THE SET INCLUDES:

• Welding machine PATON 160 STANDARD PSI,
• Welding torch MIG/MAG type MB 15 - 3m,
• Bulk holder - 3m
• User manual and warranty card.

Specifications