Suvirinimo aparatas PATON MULTI PRO 250A 230V su osciliatoriumi

Trumpai apie prekę

Prekė: Suvirinimo aparatas PATON MULTI PRO 250A 230V su osciliatoriumi. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Paton
• Modelis: MULTI PRO 250

The Paton MULTIPRO 250 welding machine is designed for semi-uatomatic welding using the MIG/MAG method in the shielding of gases and protective mixtures, manual arc welding using the MMA method and arc welding using the TIG method with direct current.

MultiPro series devices have a contactless arc ignition module (oscillator), with a built-in gas supply valve.

The advantage of using a completely electronic control system in this device excludes defects that are characteristic in multifunctional devices, created on the basis of analog control systems, which by definition are always directed to one specific method, and all other methods as additional have control defects. In a completely electronic system, the control system has absolutely all the resources of the source, within its full power and regardless of what method is used. The "Multi-Professional" series device is designed for industrial use, the source can be separated from the welding wire feeding mechanism for convenience of use as well as for safety.

Thanks to the possibility of additional adjustment, you can choose the most optimal settings of the welding machine depending on the situation. The source provides a nominal current load of 250 А, which is enough to work with electrodes from Ф1,6 mm up to easily hot melt Ф6 mm and semi-automatic welding with solid wire with a diameter from Ф0,6 mm to Ф1,2 mm. By default, the source is set to optimal values and is simple enough if you do not go into the details of settings that already require more experience from the welder. For hazardous work conditions, a block of idle voltage reduction in the MMA method was built in, with the possibility of turning it on and off.

✅ Wide possibilities of adjusting welding parameters

a) method MMA – 1 (basic) + 10 (additional)

b) method TIG – 1 (basic) + 10 (additional)

c) method MIG/MAG – 2 (basic) + 8 (additional)

✅ Availability of pulsed current welding mode in all methods;

✅ In addition to protection against power surges, the devices have a operation stabilization system with longer voltage changes in the single-phase power grid and allow the device to work properly for the voltage range from 160 V to 260 V.that at a minimum voltage of 160 V, electrode welding with a diameter of not more than Ф 3 mm or semi-automatic welding with a wire with a diameter of not more than Ф 0,8 mm may be carried out.

✅ Installed module for contactless electric arc ignition in TIG DC method (initiation of electric arc with high voltage of kV)

✅ The welding machine is adapted to the standard electricity network. Thanks to its high energy efficiency ratio, the source provides twice as much electricity demand compared to traditional sources;

✅ Adaptive fan speed adjustment, which I work with greater efficiency, when the device is heated, and slows down the speed when the device is unused. This affects fan wear, reduces the amount of dust in the device and noise during welding.

✅ Convenience of work associated with high load duration at nominal current, thus enabling practically uninterrupted operation at 25 °C.

✅ High reliability of the device in production conditions with high dustiness and high humidity.

✅ The device has a thermal protection system protecting all elements generating heat of the welding unit from overheating.

✅ All electronic components of the device are impregnated with two layers of high-quality varnish, which ensures the reliability of the product during the entire service life;

✅ Improved stability of electric arc glow, which virtually eliminates electrode sticking.

✅ When the source is separated from the wire feeder, it provides small dimensions and makes the device mobile, which simplifies welding in hard-to-reach places.

PATON MULTI PRO ALSO HAS:

✅ GAS-FREE WELDING FUNCTION – SELF-SHIELDING WIRE WELDING

All PATON migomates are suitable for self-shielding wire welding. Such welding, unlike the traditional MIG/MAG welding process, is carried out without the use of shielding gas – however, it requires having a special welding wire. Such a wire produces its own shield, which helps to protect the welding arc. Self-shielding wire adapted to PATON welding machines can be purchased here – 5 kg spools of wire will fit all wire feeders.

✅ MULTIPRO SERIES – BUILT-IN IONIZER

MultiPro series welding machines have a built-in HF IONIZER, which allows contactless arc glow in the TIG welding method. This extension is a function of the TIG handle control button. The handle button control cable connects directly to this module. After pressing the control button on the burner, the control signal is sent to the controller of the welding device, which develops the function of the previous ventilation with t1 gas to clean the weld area before welding, and with a delay gives the signal to turn on the device – thanks to which we have the possibility of TIG welding with contactless arc ignition.

✅ SOLDERING – REGULATION OF INDUCTANCE

MIGOMATY Paton from the Standard and PRO series have the possibility of soldering, thanks to the function of changing the inductance in three degrees. Inductance control allows you to optimize the characteristics of the arc depending on the thickness of the welded element. This function is necessary to change the current flow rate when changing the arc voltage. The thinner the element to be welded using MIG/MAG, the greater the inductance (soft arch – less melting), for thick elements vice versa (hard arch – greater melting).

A characteristic feature of the semi-automatic PATON® series "Multi-Professional" is a high-quality, sealed, metallic wire feeder, as well as the existing KZ-2 connector of the "EURO" type, which has become a standard in the world, allowing the user in the future to change the handle at his discretion. The device has a module protecting against incorrect levels of supply voltage (overvoltage or voltage drops) as well as against overvoltages. Due to the increased frequency of voltage supplied to the transformer, the transformer can be several times smaller. Therefore, the weight and dimensions of the welding machine are several times smaller than ordinary devices with identical output parameters.

MULTIPRO SERIES WELDING MACHINES ARE CHARACTERIZED BY:

• European production
• Electronic thermal protection system to protect all heat generating components from overheating
• Reliability thanks to IGBT technology
• Ability to work on long extension cords as well as with a generator
• Welding with pulse current in each welding method
• Improved electric arc glow stability
• 2T, 4T operating mode change function, gas purification with feeder function
• In addition to protection against spikes and drops in mains voltage, the devices have a stabilization system with longer voltage changes in the interphase power grid and allow proper operation for the voltage range from 320V to 440V
• Twice the electricity demand compared to traditional sources
• Optimal melting and proper stitch shape regardless of welding position

The Welding Equipment Plant PATON is the leading industrial base of the Institute of Electrical Welding. E. O. Paton. PATON manufactures a full range of professional welding equipment. It is a leader on the market of welding equipment in the territory of the Commonwealth of Independent States.

ADVANTAGES OF WELDING EQUIPMENT PATON™:

• Use only high-quality components and components
• We have all the original components right away
• Full compliance of declared parameters with reality
• Low power consumption and small size
• Exceptional multifunctionality, efficiency and ease of use
• Reliable terms of service
• High quality accessories included

MIG/MAG PATON welding machines are considered to be one of the best types of equipment for industrial enterprises with different specializations. One of the most famous welding equipment is MIG MAG PATON welding machines, otherwise known as migomat. Migomat welding PATON works in three welding modes - it supports welding using the MIG-MAG method, which allows fast and efficient welding in mechanized mode using welding wire in a protective gas shield, welding MMA and welding TIG Lift or TIG HF. It is used to connect products made of aluminum, stainless steel and low alloy steels. MIG-MAG PATON welding machines have a very high quality wire feeder, the construction of which is entirely made of steel. The MIG MAG welding process is the most commonly used process in welding. MIG MAG welding machines can be divided into those that use a single-phase network, as well as those that have a three-phase 400V power supply. MIG welding is very versatile, suitable primarily for welding steel, but also for welding aluminum.

TECHNICAL DATA:

• Power supply 50/60 Hz: 230V
• Network fuse required: 20C
• Nominal welding current: 250A
• Maximum welding current: 335A
• Nominal mains current required: 32 ... 36
• Work Cycle, %: 70% at 250 A, 100% at 208 A
• Power supply voltage change intervals: 160 – 260V
• Welding current adjustment intervals: 12 – 250A
• Welding voltage adjustment intervals: 12 – 28V
• Diameter of wrapped electrode: 1,6 – 6,0 mm
• Number of pressure rollers: 4
• Diameter of solid wire: 0,6 – 1,2
• Spool weight: ≤18 kg
• Contactless electric arc (HF): Yes
• Pulsing current welding methods: MMA: 0,2...500 Hz, TIG: 0,2...500 Hz, MIG/MAG: 5...500 Hz
• Hot-Start function in MMA method: Adjustable
• Arc-Force function in MMA method: Adjustable
• Anti-Stick function in MMA method: Automatic
• Idle voltage reduction system: On/Off
• MMA idle current voltage: 12 / 75 V
• Electric arc flashing current voltage: 110 V
• Nominal power consumption: 6,9 ... 7,7 kVA
• Maximum power consumption: 8,5 ... 11,0 kVA
• Energy efficiencý: 90%
• Cooling: Automatic
• Working temperature range: –25 ... +45 ºС
• Compliant standards: "EN 60204 – 1:2006, EN 60974 – 1:2012, EN 60974 – 10:2014"
• Dimensions (length, width, height), mm: 460 х 250 х 346
• Weight without spool and accessories: 10,7kg
• Degree of protection*: IP21

WHEN YOU BUY FROM US, YOU WILL RECEIVE:

• Welding machine PATON™ MultiPRO 250 230V
• Feeder PATON™ BPI 15-4 4×4 (spool 15 kilograms – feeder 4 rolls)
• Electrode holder ABICOR BINZEL DE2300 3m
• Mass holder ABICOR BINZEL MK300 3m
• Wire feeder rollers 4x (0,8 – 1,0),4x (1,2 – 1,6) V + 4x (0,8 – 1,0) U
• Quick coupler for gas
• Cardboard packaging
• Carrying strap
• User manual
• Guarantee

PRODUCT GALLERY:

Specifications