Suvirinimo aparatas MIGOMAT PULS MIG 200A, inverterinis, MMA/TIG Lift, Synergia, 4x4 komplektas

Trumpai apie prekę

Prekė: Suvirinimo aparatas MIGOMAT PULS MIG 200A, inverterinis, MMA/TIG Lift, Synergia, 4x4 komplektas. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: IDEAL
• Modelis: Spawarka Ideal TECNO MIG 200 PULSE LCD RSW2
• Ilgis: 510 mm
• Plotis: 230 mm
• Aukštis: 370 mm

Manufacturer: IDEAL ||| Welding methods: MIG/MAG, MMA, TIG Lift, FLUX ||| Maximum welding current: 200A ||| Power supply: 230V 1ph

MAG welding kit with cylinder Ar/CO2 8l

TECNOMIG 200P PULSE is an inverter synergic semi-automatic welding machine designed for arc welding using MIG/MAG, MMA, TIG Lift, and soldering galvanized sheets. The device is designed for use in professional use.

The device has three synergistic MIG/MAG welding modes: MIG, MIG PULS, MIG DOUBLE PULS.

TECNOMIG 200P PULSE is used for welding aluminum and its alloys, stainless steel, carbon and low alloy steels and soldering galvanized sheets. Welding is carried out in an inert gas, active gas or mixture, depending on the program selected on the control panel.

Set parameters manually or choose one of the 52 synergistic MIG/MAG programs for welding: AlMg, AlSi, Al99,5, CuSi3, CuAl9, 308LSi, 316LSi and FE.

➡ ADVANTAGES OF THE DEVICE:

• smooth adjustment of all welding parameters,
• synergy - the device has synergistic programs,
• pulse and double pulse mode,
• operating modes 2T/4T - weld as standard in 2T mode or switch to 4T mode when you have a lot of work and long welds to position,
• accurate adjustment of the length of the welding arc,
• regulation of welding inductance - wider face and smaller melt or narrow face and deep melt? Choose the optimal settings for the work you are currently doing, thanks to the MIG/MAG welding inductance adjustment,
• regulation of wire burning and access,
• regulation of voltage at pulsation (peak),
• regulation of gas outflow time before and after welding,
• readable LCD display, showing all parameters,
• possibility of TIG DC Lift welding,
• regulation of frequency, cycle and pulse current in TIG Lift,
• MIG spot welding.

Professional Wire Feeder

Professional wire feeder 4R (4x4) - this is a reliable wire feeding regardless of the spool weight and type of welding wire. The proven feeder mechanism has a big impact on the smoothness of wire feeding, and this already translates directly into the welding parameters of the device.

IDEAL - A GOOD CHOICE FOR TODAY AND TOMORROW

The IDEAL brand is the result of many years of activity of specialists in the welding industry. IDEAL devices are distinguished by attention to quality and diligence. Representatives of the IDEAL brand are constantly looking for inspiration, among others, through regular participation in national and international welding fairs. More than 30 years experience in the design and manufacture of devices is noticeable in IDEAL products.

Power supply parameters:

• Supply Voltage: Single Phase 230V
• Technology: IGBT Inverter
• Current taken from the mains: 25A
• Power: 6,5kW
• Degree of protection: IP 23S
• Dimensions: 510x230x370 mm
• Weight: 12,5kg

MIG/MAG welding parameters:

• MIG/MAG welding current: 28 - 200A
• MIG/MAG duty cycle: 60% 200A, 100% 160A
• MIG/MAG welding voltage: smooth adjustment
• Wire feed speed: smooth adjustment
• Spool with wire: max 5kg (D200)

• Diameter of aluminum wire: 0,8 - 1,2 mm
• Wire diameter for soldering: 0,8 mm
• Diameter of self-shielding wire: 0,8 - 1,0 mm
• Steel wire diameter: 0,6 - 1,0 mm
• Stainless steel wire diameter: 06 - 1,0 mm

• MIG/MAG welding polarity change: YES
• Welding Inductance Adjustment: YES
• Synergistic MIG/MAG programs: YES - 52 programs
• Operating mode in manual settings MANUAL: YES
• MIG/MAG pulse mode: YES

TIG welding parameters:

• TIG welding current: 5 - 200A
• Output Current: DC Constant
• Arch ignition: contact - Lift
• TIG duty cycle: 60% 180A
• TIG welding current regulation: smooth

MMA welding parameters:

• MMA welding current: 5 - 180A
• Electrode diameter: 1,6 - 4,0 mm
• MMA Welding Current Adjustment: Smooth
• MMA Pulse Mode: YES
• Arc Force Function: YES
• Hot Start Function: YES
• Anti-Stick Function: YES
• VRD Function: YES

• IDEAL TECNO MIG 200 PULSE LCD
• MIG MB-24/3m welding torch
• MMA Electrode Cable
• Bulk cable
• User manual PL

+ WELDING ACCESSORIES FOR FREE

• Teflon insert for aluminum wire (mounted in the holder).
• Roll for aluminium feeder - 1,0 / 1,2
• Roll for feeder - 0,8 / 1,0

+ MAG WELDING KIT WITH CYLINDER Ar/CO2

• factory new Ar/CO2 cylinder with a capacity of 8l - certified, has all the approvals required by gas sales points,
• steel welding wire SG2 0,8mm x 5kg,

+ ADDITIONAL WELDING ACCESSORIES

• welding gloves,
• set of spare parts for the burner,
• magnetic angle midi.

PHOTO GALLERY:

Specifications