{"product_id":"suvirinimo-aparatas-migomat-215a-mig-mag-mma-tig-lift-skirtas-aliuminiui","title":"Suvirinimo aparatas MIGOMAT 215A MIG\/MAG MMA TIG LIFT, skirtas aliuminiui","description":"\u003ch2\u003eTrumpai apie prekę\u003c\/h2\u003e\u003cp\u003ePrekė: Suvirinimo aparatas MIGOMAT 215A MIG\/MAG MMA TIG LIFT, skirtas aliuminiui. Kategorija: Pusiau automatiniai suvirinimo aparatai.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGamintojas:\u003c\/strong\u003e Powermat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModelis:\u003c\/strong\u003e PM-PAS-215L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIlgis:\u003c\/strong\u003e 460 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlotis:\u003c\/strong\u003e 220 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAukštis:\u003c\/strong\u003e 360 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eALUMINIUM WELDING | MIG\/MAG SYNERGY | MIG PULSE | MMA | TIG LIFT | FLUX | IGBT TECHNOLOGY | 215 A\u003c\/h2\u003e\u003ch2\u003eModel: PM-PAS-215L\u003c\/h2\u003e\u003ch2\u003eEnsure comfortable and precise welding in the workshop, during repairs and assembly work. Electronically controlled semi-automatic welding machine with IGBT technology supports MIG\/MAG, MIG PULSE, MMA, LIFT TIG and FLUX, so you can easily adjust the method to the type of material and task at hand.\u003c\/h2\u003e\u003ch2\u003e⚫ LESS SETTING, MORE WELDING\u003c\/h2\u003e\u003cp\u003e▪ When you want to start working efficiently, \u003cb\u003esynergic mode\u003c\/b\u003e helps you choose the right parameters after choosing the material, gas and wire diameter.\u003c\/p\u003e\u003cp\u003e▪ You gain \u003cb\u003esupport for five welding methods\u003c\/b\u003e, \u003cb\u003eLCD panel\u003c\/b\u003e and the ability to work with both \u003cb\u003efull wire\u003c\/b\u003e and \u003cb\u003eFLUX\u003c\/b\u003e.\u003c\/p\u003e\u003ch2\u003e🟠 WHY CHOOSE OUR PRODUCT?\u003c\/h2\u003e\u003ch2\u003e🔸 MULTIFUNCTIONAL WELDING IN ONE DEVICE\u003c\/h2\u003e\u003cp\u003eYou don’t have to invest in several different devices. You use MIG\/MAG manual, MIG\/MAG synergistic, MIG PULSE, MMA, LIFT TIG and FLUX methods, choosing the welding method for the material and the work performed.\u003c\/p\u003e\u003ch2\u003e🔸 READY FOR WELDING ALUMINIUM AND STEEL\u003c\/h2\u003e\u003cp\u003eAL MG and AL SI programs enable MIG welding of aluminium alloys. There are also programs for carbon steel, stainless steel, copper and materials intended for soldering.\u003c\/p\u003e\u003ch2\u003e🔸 INTUITIVE OPERATION OF PARAMETERS\u003c\/h2\u003e\u003cp\u003eLCD panel, electronic control and synergistic mode make it easy to select settings. With the knob, you can quickly change the parameter values, and the display presents the most important information about the operation of the device on an ongoing basis.\u003c\/p\u003e\u003ch2\u003e🟠 WHAT SETS OUR WELDING MACHINE APART?\u003c\/h2\u003e\u003ch2\u003e🔸 IGBT TECHNOLOGY\u003c\/h2\u003e\u003cp\u003eIGBT transistors are responsible for electronic control of the welding process. The device uses DC current during all supported methods.\u003c\/p\u003e\u003ch2\u003e🔸 PRECISE PARAMETER ADJUSTMENT\u003c\/h2\u003e\u003cp\u003eInductance settings, BURNBACK, HOT START, ARC FORCE and VRD are available. This allows you to adjust the nature of the work to the task at hand.\u003c\/p\u003e\u003ch2\u003e🔸 WIRE FEEDER WITH ADJUSTABLE PRESSURE\u003c\/h2\u003e\u003cp\u003eThe adjustable wire feeding mechanism allows you to adjust the pressure to the type of binder. The manual wire feed feature makes it easy to prepare the device before welding.\u003c\/p\u003e\u003ch2\u003e🟠 EASY TO READ LCD CONTROL PANEL\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eElectronic control panel with LCD\u003c\/b\u003e display provides convenient access to all the most important welding parameters.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eTwo digital display fields\u003c\/b\u003e present, among others, current, voltage, wire feed speed and additional functions settings.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eCentral knob and function buttons\u003c\/b\u003e allow you to quickly change parameters and approve them without complicated operation. Thanks to this, the configuration of the device runs smoothly both when changing the welding method and the material.\u003c\/p\u003e\u003ch2\u003e🟠 WELDING CAPACITY UP TO 215 A\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eThe maximum welding current of 215 A\u003c\/b\u003e in MIG\/MAG and LIFT TIG methods allows you to perform a wide range of workshop, assembly and repair work.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eThe 60% duty cycle\u003c\/b\u003e enables welding at full current of 215 A, while at \u003cb\u003e100% duty cycle\u003c\/b\u003e the device reaches \u003cb\u003e166,5 A\u003c\/b\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIGBT\u003c\/b\u003e technology is responsible for the stable operation of the power source, and \u003cb\u003e230 V\u003c\/b\u003e power supply allows you to use the device in many workplaces.\u003c\/p\u003e\u003ch2\u003e⚫ FOCUS ON WELDING, NOT ON SETTINGS\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eSynergic mode\u003c\/b\u003e helps you prepare your device for work faster, and you can focus on making the weld. You spend more time working instead of looking for the right settings.\u003c\/p\u003e\u003ch2\u003e🟠 TECHNICAL DATA\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePower supply: \u003cb\u003e230 V \/ 50 Hz\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eTechnology: \u003cb\u003eIGBT\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eWelding Current: \u003cb\u003eDC\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eProtection class: \u003cb\u003eIP21S\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eIdle voltage: \u003cb\u003e62 V\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eWelding methods: \u003cb\u003eMIG\/MAG Manual, MIG\/MAG Synergistic, MIG PULSE, MMA, LIFT TIG, FLUX\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterials: \u003cb\u003eSteel, stainless steel, aluminium and alloys, copper and alloys, soldering materials\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eWire diameters: \u003cb\u003e0,8 \/ 0,9 \/ 1,0 \/ 1,2 mm\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eMMA electrode diameters: \u003cb\u003e1,6 – 5 mm\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating modes: \u003cb\u003e2T \/ 4T \/ SPOT\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eMIG\/MAG: \u003cb\u003e30–215 A | 15,5–24,8 V | 9 kVA | 60%: 215 A | 100%: 166,5 A\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eMMA: \u003cb\u003e25 – 190 A | 21 – 27,6 V | 8,8 kVA | 60%: 190 A | 100%: 147,2 A\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eTIG LIFT: \u003cb\u003e15–215 A | 10,6–18,8 V | 6,7 kVA | 60%: 215 A | 100%: 166,5 A\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eRegulation: \u003cb\u003eInductance (-10 to +10), BURNBACK (0–1), SPOT (0–3), HOT START (0–10), ARC FORCE (0–10), VRD (ON\/OFF)\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlug diameter:\u003cb\u003e 35\/50 17V-35 (13mm)\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e🟠 CONTENTS OF THE SET\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInverter welder \u003cb\u003ePowermat PM-PAS-215L\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eEURO MIG\/MAG welding torch – 395 cm\u003c\/li\u003e\n\u003cli\u003eMMA electrode holder – 215 cm\u003c\/li\u003e\n\u003cli\u003eBulk holder – 205 cm\u003c\/li\u003e\n\u003cli\u003eWelding mask\u003c\/li\u003e\n\u003cli\u003eBrush with hammer\u003c\/li\u003e\n\u003cli\u003eCurrent terminal 0,8 mm – 1 pc.\u003c\/li\u003e\n\u003cli\u003eCurrent terminal 1,0 mm – 1 pc.\u003c\/li\u003e\n\u003cli\u003eWire feeder roller 1,0\/1,2 mm type U\u003c\/li\u003e\n\u003cli\u003eUniversal key\u003c\/li\u003e\n\u003cli\u003eFlexible Teflon cable\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003cli\u003eOriginal packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e⚫ READY FOR VARIOUS CHALLENGES IN THE WORKSHOP\u003c\/h2\u003e\u003cp\u003eFrom \u003cb\u003estructural steel\u003c\/b\u003e to \u003cb\u003ealuminium\u003c\/b\u003e and \u003cb\u003estainless steel\u003c\/b\u003e, one device allows you to perform many different jobs. You gain more freedom without having to change equipment.\u003c\/p\u003e\u003ch2\u003e🟠 WELDING OF ALUMINIUM\u003c\/h2\u003e\u003cp\u003eThe device enables \u003cb\u003ewelding of aluminium and its alloys\u003c\/b\u003e using the \u003cb\u003eMIG\/MAG\u003c\/b\u003e method using dedicated \u003cb\u003eAL MG\u003c\/b\u003e and \u003cb\u003eAL SI\u003c\/b\u003e programs. \u003cb\u003eThe MIG PULSE\u003c\/b\u003e mode provides better control over the welding lake, which facilitates the execution of welds in aluminum materials.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eThe AL MG\u003c\/b\u003e program is designed for welding \u003cb\u003ealuminum-magnesium alloys\u003c\/b\u003e, while \u003cb\u003eAL SI\u003c\/b\u003e supports \u003cb\u003ealuminum-silicon alloys\u003c\/b\u003e. The device works with \u003cb\u003ewires with a diameter of 0,8, 0,9, 1,0 and 1,2 mm\u003c\/b\u003e, enabling the selection of the appropriate welding material.\u003c\/p\u003e\u003cp\u003eTo work with aluminum, it is recommended to use a \u003cb\u003eroller feeder with a U\u003c\/b\u003e groove, which ensures proper handling of soft wire. Thanks to the combination of \u003cb\u003esynergic programs\u003c\/b\u003e, \u003cb\u003eMIG PULSE\u003c\/b\u003e and properly selected settings, the device works well when welding aluminum elements of different thicknesses.\u003c\/p\u003e\u003ch2\u003e🟠 MIG\/MAG WELDING AND TIG LIFT\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eMIG\/MAG\u003c\/b\u003e ensures efficient welding of \u003cb\u003ecarbon steel\u003c\/b\u003e, \u003cb\u003estainless steel\u003c\/b\u003e, \u003cb\u003ealuminium and its alloys\u003c\/b\u003e, \u003cb\u003ecopper\u003c\/b\u003e and materials intended for \u003cb\u003elutowelding\u003c\/b\u003e. There is a choice of \u003cb\u003emanual\u003c\/b\u003e or \u003cb\u003esynergic\u003c\/b\u003e mode, which facilitates the selection of parameters after selecting the material, gas and wire diameter.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eThe MIG\/MAG current range from 30 to 215 A\u003c\/b\u003e enables welding of both thin sheets and thicker structural elements. The device supports \u003cb\u003ewires with a diameter of 0,8, 0,9, 1,0 and 1,2 mm\u003c\/b\u003e, and the \u003cb\u003eAL MG\u003c\/b\u003e, \u003cb\u003eAL SI\u003c\/b\u003e and \u003cb\u003eMIG PULSE\u003c\/b\u003e programs facilitate welding of aluminum and stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eThe LIFT TIG\u003c\/b\u003e method allows you to perform \u003cb\u003eprecise and aesthetic welds\u003c\/b\u003e using the TIG \u003cb\u003ehandle with gas valve\u003c\/b\u003e. Arching is done by \u003cb\u003etouching the material with a tungsten electrode and its slight elevation\u003c\/b\u003e, without the use of high-frequency ignition.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eThe TIG current range from 15 to 215 A\u003c\/b\u003e allows you to adjust the parameters to different material thicknesses, providing great control over the welding process during workshop, assembly and repair work.\u003c\/p\u003e\u003ch2\u003e🟠 MMA WELDING\u003c\/h2\u003e\u003cp\u003eThe \u003cb\u003eMMA\u003c\/b\u003e method enables welding with \u003cb\u003eelectrodes wrapped in a diameter of 1,6 to 5 mm\u003c\/b\u003e, thanks to which it works well during \u003cb\u003eworkshop\u003c\/b\u003e, \u003cb\u003eassembly\u003c\/b\u003e, \u003cb\u003erepair\u003c\/b\u003e and \u003cb\u003efield\u003c\/b\u003e. \u003cb\u003eThe welding current range from 25 to 190 A\u003c\/b\u003e allows you to adjust the parameters to different material thicknesses and type of weld.\u003c\/p\u003e\u003cp\u003eThe \u003cb\u003eHOT START\u003c\/b\u003e function temporarily increases the current during arc ignition, making it easier to start welding and reducing the risk of sticking the electrode. \u003cb\u003eARC FORCE\u003c\/b\u003e dynamically stabilizes the arc during short circuit of the electrode with the welding lake, improving the smoothness of weld guidance.\u003c\/p\u003e\u003cp\u003eThe \u003cb\u003eVRD\u003c\/b\u003e function reduces the output voltage in the unloaded state to about \u003cb\u003e20 V\u003c\/b\u003e, increasing safety during breaks in operation. All settings are available directly from the \u003cb\u003econtrol panel\u003c\/b\u003e, which allows you to quickly adjust the device to the current welding conditions.\u003c\/p\u003e\u003ch2\u003e🟠 IGBT TECHNOLOGY\u003c\/h2\u003e\u003cp\u003eModern \u003cb\u003eIGBT\u003c\/b\u003e technology is responsible for electronic control of the welding process and \u003cb\u003estable operation of the device\u003c\/b\u003e in each supported method. The use of \u003cb\u003eIGBT\u003c\/b\u003e transistors enables precise control of welding parameters and quick response of the system to load changes.\u003c\/p\u003e\u003cp\u003eThe power source works using \u003cb\u003eDC\u003c\/b\u003e, providing \u003cb\u003estable welding arc\u003c\/b\u003e during operation using \u003cb\u003eMIG\/MAG\u003c\/b\u003e, \u003cb\u003eMMA\u003c\/b\u003e, \u003cb\u003eLIFT TIG\u003c\/b\u003e and \u003cb\u003eFLUX\u003c\/b\u003e methods. This translates into greater repeatability of settings and more convenient control over the welding process.\u003c\/p\u003e\u003cp\u003eThe combination of \u003cb\u003eIGBT\u003c\/b\u003e technology with \u003cb\u003eelectronic control panel\u003c\/b\u003e and \u003cb\u003eLCD\u003c\/b\u003e display allows you to conveniently choose the operating parameters for the type of material and the welding method chosen. Thanks to this, the device works well both during everyday workshop work and more demanding applications.\u003c\/p\u003e\u003ch2\u003e🟠 WIRE FEEDING SYSTEM\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eInternal wire feeding mechanism\u003c\/b\u003e allows convenient installation of the spool and setting the appropriate resistance of its unwinding. Thanks to this, the wire is fed evenly to the welding torch during operation using the \u003cb\u003eMIG\/MAG\u003c\/b\u003e or \u003cb\u003eFLUX\u003c\/b\u003e method.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAdjustable roller pressure\u003c\/b\u003e allows you to adjust the feed force to the type and diameter of the wire used. Correct setting reduces the risk of \u003cb\u003esliding of the roller\u003c\/b\u003e, deformation of the wire and increased handling resistance.\u003c\/p\u003e\u003cp\u003eThe device works with \u003cb\u003erollers with V\u003c\/b\u003e groove for steel wire and \u003cb\u003erollers with U\u003c\/b\u003e groove for soft aluminum wire. This makes it easier to prepare the welding machine to work with different materials and improves feed stability.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eManual wire feed\u003c\/b\u003e function allows you to run the wire through the EURO handle without starting welding. Just hold down the wire diameter selection button on the panel to efficiently prepare the device for operation.\u003c\/p\u003e\u003ch2\u003e🟠 EURO CONNECTOR\u003c\/h2\u003e\u003cp\u003eThe device is equipped with a \u003cb\u003eEURO\u003c\/b\u003e connector, which allows you to quickly connect and disconnect the welding torch without stripping the housing.\u003c\/p\u003e\u003cp\u003eThis solution facilitates the replacement of the cable and reduces the time of preparing the equipment for work.\u003c\/p\u003e\u003cp\u003eThe \u003cb\u003eEURO\u003c\/b\u003e standard is widely used, so it is easier to choose compatible handles and accessories. You gain \u003cb\u003emore convenient operation\u003c\/b\u003e and more freedom during everyday use of the welding machine.\u003c\/p\u003e\u003ch2\u003e🟠 POSSIBILITIES OF THE DEVICE\u003c\/h2\u003e\u003ch2\u003e▪ MATERIAL PROGRAMS\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCO₂\u003c\/b\u003e – carbon steel welding in carbon dioxide shield.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMIX\u003c\/b\u003e – welding of carbon steels and stainless steels in gas mixtures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAL MG\u003c\/b\u003e – a program for welding aluminum-magnesium alloys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAL SI\u003c\/b\u003e – a program for welding aluminum-silicon alloys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFLUX\u003c\/b\u003e – a program for welding with self-shielding wire without gas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e▪ SPECIAL FUNCTIONS\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eHOT START\u003c\/b\u003e – temporarily increases the current during arcing using the MMA method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eARC FORCE\u003c\/b\u003e – stabilizes the arc and reduces its extinguishing during MMA welding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVRD (ON\/OFF)\u003c\/b\u003e – lowers the output voltage without load to about 20 V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInductance regulation\u003c\/b\u003e – changes the nature of the arc and the number of chippings during MIG\/MAG welding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBURNBACK\u003c\/b\u003e – regulates the length of wire burning after welding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSPOT\u003c\/b\u003e – allows you to make spot welds with adjustable welding time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e2T \/ 4T\u003c\/b\u003e – choosing how to control the welding torch button.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManual wire feed\u003c\/b\u003e – makes it easier to run the wire through the handle without starting welding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePolarity change\u003c\/b\u003e – fast switching between MIG\/MAG welding with gas and FLUX.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e⚫ READY FOR VARIOUS WELDING TASKS\u003c\/h2\u003e\u003cp\u003e▪ One device provides \u003cb\u003eMIG\/MAG\u003c\/b\u003e, \u003cb\u003eMMA\u003c\/b\u003e, \u003cb\u003eLIFT TIG\u003c\/b\u003e, \u003cb\u003eFLUX\u003c\/b\u003e and \u003cb\u003eMIG PULSE\u003c\/b\u003e, so you do not have to limit yourself to one method.\u003c\/p\u003e\u003cp\u003e▪ \u003cb\u003eSupport for aluminium\u003c\/b\u003e, \u003cb\u003estainless steel\u003c\/b\u003e and \u003cb\u003ecarbon steel\u003c\/b\u003e allows you to use the welding machine during many workshop and assembly works.\u003c\/p\u003e\u003ch2\u003e⚫ FAQ\u003c\/h2\u003e\u003ch2\u003e▪ DOES THE WELDING MACHINE ALLOW WELDING ALUMINUM?\u003c\/h2\u003e\u003cp\u003eYes. The device has \u003cb\u003eAL MG\u003c\/b\u003e and \u003cb\u003eAL SI\u003c\/b\u003e programs designed for MIG\/MAG welding of aluminum alloys. In addition, the \u003cb\u003eMIG PULSE\u003c\/b\u003e mode facilitates control over the welding process of aluminium.\u003c\/p\u003e\u003ch2\u003e▪ CAN YOU WELD WITHOUT A GAS CYLINDER?\u003c\/h2\u003e\u003cp\u003eYes. The welding machine supports the \u003cb\u003eFLUX\u003c\/b\u003e method, i.e. self-shielding wire welding. In this mode, change the polarity according to the device instructions.\u003c\/p\u003e\u003ch2\u003e▪ WHAT WELDING METHODS DOES THE DEVICE SUPPORT?\u003c\/h2\u003e\u003cp\u003eThe PM-PAS-215L supports \u003cb\u003eMIG\/MAG Manual\u003c\/b\u003e, \u003cb\u003eMIG\/MAG Synergistic\u003c\/b\u003e, \u003cb\u003eMIG PULSE\u003c\/b\u003e, \u003cb\u003eMMA\u003c\/b\u003e, \u003cb\u003eLIFT TIG\u003c\/b\u003e and \u003cb\u003eFLUX\u003c\/b\u003e.\u003c\/p\u003e\u003ch2\u003e▪ WHAT WIRE AND ELECTRODE DIAMETERS ARE SUPPORTED?\u003c\/h2\u003e\u003cp\u003eThe device works with wires with a diameter of \u003cb\u003e0,8 mm\u003c\/b\u003e, \u003cb\u003e0,9 mm\u003c\/b\u003e, \u003cb\u003e1,0 mm\u003c\/b\u003e and \u003cb\u003e1,2 mm\u003c\/b\u003e. In the MMA method electrodes with a diameter of \u003cb\u003e1,6 to 5 mm\u003c\/b\u003e are supported.\u003c\/p\u003e\u003ch2\u003e▪ DOES THE WELDING MACHINE HAVE SYNERGISTIC MODE?\u003c\/h2\u003e\u003cp\u003eYes. \u003cb\u003eMIG\/MAG Synergistic\u003c\/b\u003e mode automatically selects welding parameters after selecting the material, gas and wire diameter, making it easier to prepare the device for operation.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGroup\u003c\/th\u003e\n\u003cth\u003eName\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003enew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eInvoice\u003c\/td\u003e\n\u003ctd\u003eWith VAT invoice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003ePowermat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\u003ctd\u003e9 kVA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eSupply voltage (V)\u003c\/td\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eDuty cycle time\u003c\/td\u003e\n\u003ctd\u003e60%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eMaximum electrode diameter\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eWire diameter (mm)\u003c\/td\u003e\n\u003ctd\u003e0,8-1,2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eDevice weight\u003c\/td\u003e\n\u003ctd\u003e8.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eWelding range\u003c\/td\u003e\n\u003ctd\u003e15–220 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e360 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e460 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eLength of ground cable\u003c\/td\u003e\n\u003ctd\u003e202 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eWelding cable length\u003c\/td\u003e\n\u003ctd\u003e395 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eProduct weight with unit packaging\u003c\/td\u003e\n\u003ctd\u003e13.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eManufacturer code\u003c\/td\u003e\n\u003ctd\u003ePM1555\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eEAN (GTIN)\u003c\/td\u003e\n\u003ctd\u003e5900748404267\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003ePackaging status\u003c\/td\u003e\n\u003ctd\u003eoriginal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePM-PAS-215L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eWelding methods\u003c\/td\u003e\n\u003ctd\u003eMIG\/MAG,MMA,TIG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eAdditional features\u003c\/td\u003e\n\u003ctd\u003ewelding mask included,infinitely adjustable welding current,LCD display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"POWERMAT","offers":[{"title":"Default Title","offer_id":45959829454908,"sku":"18720664376","price":282.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/2161\/6188\/files\/MIGOMAT-INVERTER-WELDING-MACHINE-FOR-ALUMINIUM-215A-MIG-MAG-MMA-TIG-LIFT.jpg?v=1786090560","url":"https:\/\/market365.lt\/de\/products\/suvirinimo-aparatas-migomat-215a-mig-mag-mma-tig-lift-skirtas-aliuminiui","provider":"Market365","version":"1.0","type":"link"}