Suvirinimo aparatas MIG/TIG AC/DC EXPERT MULTI 270 PFC 4in1 Pro7 IDEAL

Trumpai apie prekę

Prekė: Suvirinimo aparatas MIG/TIG AC/DC EXPERT MULTI 270 PFC 4in1 Pro7 IDEAL. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: IDEAL
• Modelis: EXMULTI270

P A R A M E T R Y T E C H N I C Z N E

• Current taken from the network 45A
• C25A power supply network protection
• Rated supply voltage 230V; 50-60Hz (1ph)
• Balance AC (-)5÷(+)5
• Current build-up time 0÷10s
• Current drop time 0÷10s
• Frequency AC 50÷250Hz
• Pulse frequency 0.5÷999.0Hz
• Gas after 0÷10s
• Gas before 0.1÷2.0s
• Power 10.5kW
• Idle voltage 90V
• Current at work 100% 170A (MIG/MAG/TIG) / 160A (MMA)
• Current at operation 40% 270A (MIG/MAG/TIG) / 250A (MMA)
• Current at operation 60% 220A (MIG/MAG/TIG) / 205A (MMA)
• Diameter of aluminium wire 1.0÷1.2mm
• Wire diameter for soldering 0.9÷1.2mm
• Diameter of powder wire 0.9÷1.2mm
• Steel wire diameter 0.8÷1.2mm
• Stainless steel wire diameter 0.8÷1.2mm
• Welding electrode diameter 1.6÷5.0mm
• Welding Current Adjustment Range 20÷270A (MIG/MAG) / 3÷270A (TIG) / 10÷250A (MMA)
• Wire spool size D200 (5kg) / D300 (15kg)

PHYSICAL PARAMETERS

• Degree of protection IP21S
• Weight of the device / set 34,5 kg
• Overall dimensions L x W x H 795x215x435 mm

SUPPORTED TYPES OF WELDING WIRE:

Diameter of aluminium wire 0.8÷1.2 mm

Wire diameter for soldering 0.8÷1.0 mm

Diameter of self-shielding wire 0.8÷1.2 mm

Steel wire diameter 0.6÷1.0 mm

Stainless steel wire diameter 0.8÷1.0 mm

Welding electrode diameter 1.6÷5.0 mm

EXPERT MULTI 270 PFC PULSE 4in1 Pro5 is an inverter, synergic and multifunctional welding source, designed for arc welding using the MIG/MAG, FLUX, TIG and TIG PULS methods with alternating current (AC), constant current (DC), and the MMA method (wrapped electrode) with direct current (DC) and al current (DC). It also enables MIG/MAG welding with pulsed current: single PULSE and double PULSE. The device has been designed for a wide range of applications: from maintenance work, through welding of steel structures, to repairs of car bodies.

EXPERT MULTI 270 is used for soldering galvanized sheets, welding stainless steel, carbon and low alloy steels and aluminum. Welding is carried out in an inert gas shield, active or mixture, and with reverse polarity without gas.

The TIG DC i TIG DC PULS function is used for welding stainless steel, carbon and low alloy steels, copper and titanium.

TIG AC and TIG AC PULS: allows welding of aluminium and its alloys and brass.

By adjusting the parameters of pulse welding TIG PULS we have an impact on the shape of the weld and the focus of the arc. Pulse welding also reduces the amount of heat supplied to the material and is applicable when welding thin materials.

Arching occurs in non-contact (HF) or raised (LIFT) mode. The LIFT function is used during welding in environments with a high risk of electromagnetic interference affecting the environment.

In addition, the source has a dedicated TIG method (SMART TIG), in which the user selects the basic welding parameters sequentially. On their basis, the device selects optimal parameters of welding current or shielding gas outflow.

It also has a number of additional features, for use in special conditions. These include MIX AC/DC, MULTITACK, EXTRA FUSION, Q-START, DYNAMIC ARC and MULTIWAVE (hybrid characteristics).

With the MIG/MAG method, we can choose the button mode in the handle, between working in SPOT mode (point welding), 2-bar (without lock), 4-bar (button lock for long welds), S2-bar and S4-bar.

With the TIG method, we can choose the button function in the handle, between operation in 2-bar , 4-bar , SPOT and special PRT mode (two-level welding current).

C H A R A K T E R Y S T Y K A P R O D U K T U

• Possibility of synergistic and manual welding
• Intuitive controls - migomat has been designed in such a way that its operation does not cause problems even for people starting their adventure with welding
• Single-phase power supply 230 V - allows you to work with the device practically anywhere with access to the electrical network
• Welding holder MB 24 with a length of 3 m - allows you to work freely without having to change the location of the migomate (can be changed to other lengths - eurodisconnector)
• The TIG 26 holder with a length of 4m - allows you to work freely without having to change the location of the device.
• Smooth regulation of welding current - provides the possibility of accurate selection of welding parameters depending on the type and thickness of the material
• Polarity change for FLUX welding without shielding gas
• Configurable device via touch screen or potentiometers
• Fuction 2-bar/4-bar, spot welding
• Wire feeder: internal, 4-roller
• The device has a fan cooling system which significantly increases its efficiency
• The device is equipped with overload protection, which increases its reliability

Clear and easy to use 7-inch touch LCD display allows you to adjust welding parameters using physical buttons and knobs as well as using touch (touch screen).

The device has a manual mode (MIG MAN) and a synergic mode (MIG SYN) with the possibility of adjusting:

• gas before welding
• gas after welding
• wire access
• Wire burning
• voltage corrections
• spot welding time
• inductance
• Rising/falling current

In the MIG/MAG method there are also pulse modes (PULSE, DP), which additionally include such functions as:

• length of the arc in the pulse
• arc length at initial/final current
• base current in pulse
• pulsation time

Touch LCD display makes it easy to adjust the parameters of the TIG device:

• initial outflow of shielding gas
• initial current
• time of rising/falling current
• welding current
• base current
• final current
• pulse cycle
• pulse frequency
• AC balance
• AC frequency
• final outflow of shielding gas

Welding using the MMA method (wrapped electrode), in addition to selecting the type of current (DC or AC), is also possible with the pulsed current function (PULSE) turned on. There are also additional features:

• HOT START
• HOT START time
• ARC FORCE
• VRD

The device has an extensive system of recording and reading welding parameters (JOB function). This makes it easier to work on different materials, without having to re-position the device, with any changes (e.g. gas or wire).

The device has a fan cooling system which significantly increases its efficiency.

The fan cooling system - NORMAL or SMART mode (only activated if necessary) - reduces contamination inside the device.

The device is equipped with overload protection, over and undervoltage, to work with a generator (+/- 15%) which increases its reliability. It also has a PFC (Power Factor Correction) module, improving the power factor and "stability" of the network connection.

D O S T A W A Z A W I E R A

• Semi-automatic welding machine
• MIG welding torch 24/3 m with EURO plug
• TIG handle 26 4 m with control
• Bulk holder 3 m
• MMA handle 3 m
• Tungsten electrode
• Ceramic nozzle
• Terminal bushing
• Clamp sleeve body
• Burner Stopper Long
• Operating instructions
• Warranty card

Specifications