Suvirinimo aparatas MIG/MAG Sherman Digimig VRD 200A 230V su MMA sinergija, rinkinys

Trumpai apie prekę

Prekė: Suvirinimo aparatas MIG/MAG Sherman Digimig VRD 200A 230V su MMA sinergija, rinkinys. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Sherman
• Modelis: spawarka inwertorowa 7812680_p6
• Ilgis: 420 mm
• Plotis: 200 mm
• Aukštis: 375 mm

✅ Welding machine Sherman DIGIMIG 200 MTM is a device for manual welding of steel and non-ferrous metals using the following methods:

• MIG/MAG
• MMA (wrapped electrode)
• TIG HF

✅It can also be used for soldering of thin (up to 3 mm) galvanized sheets.

✅The device is addressed to professionals who value high quality and reliability.

✅ This kit includes standard equipment and an extensive package of accessories i allows welding of both black steel and aluminum with a Sherman DIGIMIG 200 MTM welding machine

✅ Standard equipment:

• Sherman DIGIMIG 200 MTM welding machine
• MIG welding torch TW-15 / 3 m
• TIG-17 / 4 m welding torch
• mass cable / 2,5 m
• electrode cable / 2,5 m
• instruction manual in Polish

✅ Expert Aluminium+TIG Accessory Pack:

• welding torch MB 15 5,0 m (additional handle)
• self-tinting visor 718G
• bottle with mixture ARG/CO2 8 liters (new, full, 10-year legalization, valve cap)
• ARGON cylinder 8 litres (new, full, 10-year legalization, valve cap)
• gas reducer MINI 2 pressure gauges (for cylinders with mixture)
• MINI 2 gas reducer pressure gauges (for Argon cylinders)
• feeder roll fi 1,0 / 1,2 mm U-shaped for aluminium
• Teflon cartridge red for aluminium / 3 m
• SG2 0,8 mm / 5,0 kg welding wire
• welding wire AlMg5 for aluminium fi 1,0 mm / 2,0 kg
• self-shielding welding wire 0,8 mm / 0,45 kg
• rutile welding electrodes / 1,0 kg
• anti-chipping preparation 400 ml
• MIG 1 pair welding gloves
• TIG welding gloves 1 pair
• Welding pliers
• magnetic angle 11,0 kg
• magnetic angle 22,0 kg
• gas nozzle 2 pcs.
• current tip 0,8 mm 5 pcs.
• current tip 1,0 mm ALU 5 pcs.
• TIG wire for black steel 1,6 mm / 1,0 kg
• TIG wire for black steel 2,0 mm / 1,0 kg
• TIG 308LSi wire for stainless steel 1,6 mm / 1,0 kg
• TIG 308LSi wire for stainless steel 2,0 mm / 1,0 kg
• toolbox, box for TIG/MIG parts - 1 pcs.
• tungsten electrode fi 1,6 / 2,0 / 2,4 mm / of 2 pcs. every
• terminal bushing fi 1,6 / 2,0 / 2,4 mm / 2 pcs. every
• Current switch fi 1,6 / 2,0 / 2,4 mm / 2 pcs. each
• ceramic nozzles No. 6 / 7 / 8 / of 2 pcs. every
• cork short and long / 1 pcs.
• hose for gas connection + clamps 2 sets.

✅ Digital control allows full adjustment of parameters, arc dynamics, characteristics and manual or synergistic mode of operation in the MIG/MAG method.

✅ The use of synergistic settings for ordinary steel, stainless steel and aluminum alloys in the welding machine significantly simplifies its operation and allows it to be used by people with less experience and hobbyists.

✅ When welding with MMA , HOT START, ARC FORCE functions can be adjusted and VRD can be turned off.

✅ The welding machine allows the use of several operating modes including the point welding option.

✅ The device has the memory of the last setting, i.e. after turning it off and re-enabling it, the last set parameters are restored.

✅ It is also possible to remember 10 sets of settings with easy access to the program's save/playback mode.

• supply voltage: 230 V
• technology: IGBT
• max MMA welding current: 180 A
• max TIG DC welding current: 200 A
• max MIG/MAG welding current: 200 A
• MMA duty cycle: 60%
• TIG duty cycle: 60%
• MIG/MAG cycle: 45%
• Voltage without load: 65 V
• MIG welding voltage: 15,5 – 24 V
• welding voltage correction: -20 - +20%
• MIG gas outflow: 0-9,9 s
• wire burning time: 0-1 s
• MIG spot welding time: 0,5 - 5 s
• MIG spot welding break time: 0,5 - 5 s
• current build-up time: 0 - 9,9 s
• Initial current: 10-200 A
• base current: 10-200 A
• current drop time: 0 - 9,9 s
• crater current: 10 - 200 A
• pre-outflow of gas: 0 - 3 s
• TIG gas outflow: 0 - 9,9 s
• TIG pulse frequency: 0 - 99 Hz
• TIG pulse width: 10 - 90%
• Cold Welding time: 0,01 - 5 s
• Cold Welding break time: 0,1 - 5 s
• max MMA power consumption: 7,4 kVA
• max TIG power consumption: 7,4 kVA
• max MIG/MAG power consumption: 7,4 kVA
• max MMA current consumption: 33 A
• max TIG current consumption: 24 A
• max MIG/MAG current consumption: 33 A
• spool diameter with wire: 100, 200 mm
• Network security: 25 A
• roll dimensions: 37 x 10 x 15 mm
• dimensions: 420 x 200 x 375 mm
• Weight: 7,4 kg

Self-tinting visor 718G with variable degree of protection DIN 4/5-8/9-13, variable lightening time and the ability to set sensor sensitivity. Designed for MIG/MAG, TIG and TIG Pulse welding, MMA and plasma cutting and equipped with grinding function.

- Chamber width: 5cm

• 4 independent sensors guarantee excellent work in small current welding using TIG method
• high quality LCD filters in optical class 1/1/1/2
• power source: photovoltaic cell + replaceable battery
• 4-spoke adjustable headrest for comfortable use
• shell compliant with EN175B for greater impact resistance
• variable degree of protection DIN 4/5-8/9-13
• variable lightening time
• Possibility to set sensor sensitivity

• Possibility to set sensor sensitivity

Cylinders filled with high quality mixture Ar/CO2 and Argon class 4.8 designed for welding in protective gas shielding and for other industrial applications.

The product has a protective cap protecting the valve, is factory new and much lighter than cylinders recovered from fire extinguishers.

Cylinders and valves are made in accordance with EN 1964:1999 and have the π mark of compliance with ADR/RID requirements.

Capacity [l] : 8

Amount of gas [m3] : 1,3

Mass [kg] : ~15

• LCD display
• function 2T/4T
• ArcForce
• Fan Stop
• HotStart
• Rising electricity
• current drop
• 2-roll feeder
• pre-exhaust gas
• MIG/TIG gas outflow
• TIG pulse
• regulation of inductance
• welding without gas
• MIG spot welding
• fast wire extension
• Wire burning
• Manual settings
• synergistic settings
• VRD

Specifications