Suvirinimo aparatas MIG MAG MMA 220A DUAL PULS CuSi3 230V

Trumpai apie prekę

Prekė: Suvirinimo aparatas MIG MAG MMA 220A DUAL PULS CuSi3 230V. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Weldman
• Modelis: SMART MIG 235
• Ilgis: 540 mm
• Plotis: 260 mm
• Aukštis: 450 mm

✅ Dual and Single Pulse MIG welding,

✅smooth regulation of welding voltage and wire feed,

✅regulation of MIG/MAG welding inductance in a wide range,

✅operation of modes: 2T, 4T, S4T, SPOT

✅Program memory

✅Gas test

✅Wire test

✅Synergic programmes (Fe, SS, AlMg5, AlSi5, CuSi3)

✅LUTOSPELING - After selecting the type of wire CuSi, the device enables soldering, mainly used in the automotive industry to connect galvanized sheets.

✅SPOT WELDING SPOT - Time welding function, used to attach details, thanks to which an equal length of welding welds can be obtained.

✅TIG DC LIFT - an electric arc is ignored in an inert gas (argon) shield between the welded element and the non-melting electrode, made of pure tungsten or tungsten with additives.

⏩WHAT WILL YOU FIND IN THE PACKAGE?

✔ Welding machine WELDMAN MICRO MIG 235 DUAL PULS

✔ MIG MB welding torch 24 - 3m

✔ Bulk cable

✔ Electrode cable

✔ User Manual PL

⏭WELDING ACCESSORIES FREE OF CHARGE

➡ Welding disc

➡ Hammer with brush

➡ Spare parts of the burner

➡ Additional roll for wire feeder Fe 0,8-1,0 V mm

⏩WELDING KIT

✔ reducer Ar/CO2 with two clocks,

✔ welding wire steel SG2 D200 0,8mm x 5kg,

✔ Gas hose - 2m

✔ Clamp bands - 2 pcs

WELDMAN MICRO MIG 235 are one of the most efficient and solidly made products. These devices of the MICRO MIG 235 series are made on the basis of IGBT inverter technology. As a result , the Micro Mig 235 semi-automatic welding machine has the best features of various transistors. The device uses general protections such as protection against excessive voltage, excessive current, overheating of the device, etc.

Micro Mig 235 welding machine The welding machine has material separation (including soldering), 2-bar/4-bar/S4T handle operation mode/point welding and advanced FUN STOP cooling system.

In MIG welding with so-called. With a pulsating arc, the end of the electrode wire melts accelerated, forming and peeling off metal droplets. The resulting welding arc and metal flow characteristics from the end of the wire to the welding lake, ensure better quality of the welded joint and less chipping. Pulsed MIG welding also reduces thermal deformations caused during welding. This process is recommended for use e.g. during welding of stainless and acid-resistant steels.

Dual pulsation MIG welding is particularly useful for welding aluminium and its alloys. Thanks to the use of a double pulse, with the appropriate setting of parameters, it is possible to obtain a weld that goes far beyond the capabilities of the conventional MIG method.

A well-made MIG weld with double pulsation is aesthetically and qualitatively similar to the welded joint obtained by TIG AC method. However, the difference is that during double pulsation MIG welding much higher efficiency is achieved, and the semi-automatic welding technology itself is much simpler for the operator than TIG welding.

Metal Inert Gas (MIG) spot welding is a welding technique that involves creating single welding points instead of a continuous weld. The method is used when it is necessary to connect two metal elements at specific points, which allows to reduce the heating of the material and minimize deformation.

MIG spot welding is ideal for precise joining of metals at specific points, which minimizes the impact of heat on the material and allows for aesthetic, strong joints.

Professional 2R feeder - reliable and smooth wire feeding, thanks to the use of a proven feeder design.

This device has the ability to change the polarity of MIG/MAG welding. Thanks to this, it can be welded using self-shielding wire - without the need for shielding gas.

⏩POWER SUPPLY PARAMETERS

• Power Supply: 230V
• Technology: INVERTER IGBT
• Welding methods: MIG, MAG, MMA, FLUX, TIG DC LIFT
• Maximum welding current: 220A (MIG/MAG)
• Working cycle: 60%
• Network Security 230V: 20A
• Net weight: 12,5kg

⏩ MIG/MAG welding parameters:

• Welding current: 20 - 220A
• Welding Voltage: 25V
• Wire diameter: 0,8/1,0/1,2mm
• Wire spool weight: max 5kg
• 2T/4T welding mode: YES
• Wire feeder: 2R
• MIG/MAG welding polarity change: YES
• Single pulse: YES
• Double pulse: YES

⏩ MMA welding parameters:

• Welding Current: 20-220A Fluid Adjustment
• Idle Voltage: 70V

⏩ TIG welding parameters:

• Welding Current: 10-220A Fluid Adjustment

• MIG/MAG is a popular process both in hobby applications and in industry. It consists in welding with a hot melt electrode (in the form of wire wound on a spool) in a gas shield. The advantages of semi-automatic MIG/MAG welding include: ease of mastering the method at the basic level, high welding efficiency, high quality of the resulting weld.

• MMA - this is probably the best known and widespread welding method. The type and diameter of the wrapped electrode is selected depending on the type of material being welded. The MMA method does not require shielding gases. Welding is carried out using an electrode in a special sheath, which under the influence of the heat of the welding arc melts to form a weld. Melting sheath provides protection for the welding lake.

• PULS - pulsing current welding, in which high and low current are alternately used. This reduces overall heat supply and splatter while providing greater resistance to non-melting. This method can be used to weld both metals with high thermal conductivity and thinner metals without burning them. Additionally, you can get narrower and more penetrating welds on thicker metals.

• DOUBLE PULSE - provides better transfer of the binder into the welded material, which fundamentally improves control over the welding process and the quality of the weld itself. It allows you to work in all positions and is especially useful for forced positions. It provides less heat impact, works well in the case of thinner materials or those with increased thermal conductivity, such as: aluminium alloys. Reduces the amount of chipping. The most advanced welding method, in which current pulses occur in two ranges, thanks to which we obtain the optimal aesthetics of the weld face, the so-called. husk effect.

• SPOT WELDING - a function that allows welding with equal points. This method is used in particular when combining thin body elements.

• IGBT - welding machine is made in modern inverter technology using IGBT transistors. Thanks to this, it has stable welding parameters, enjoys high efficiency and, above all, ensures good welding quality.

• LUTOSPELING - After selecting the type of wire CuSi, the device enables soldering, mainly used in the automotive industry to connect galvanized sheets

• SYNERGY - program that automatically selects the wire feed to the set welding current. Attention! The ability to choose the diameter of the welding wire and the type of gas - greater precision in the operation of Synergy.

• 2T - pressing the button initiates gas outflow and welding current, releasing the button turns off welding current and gas outflow

• 4T - pressing and releasing the handle button initiates gas outflow and welding current, re-pressing and releasing the button turns off the welding current and gas outflow,

• S-4T - Four bars with HOT Start and end current (crater filling),

Choose a brand whose history dates back to the beginning of the twenty-first century. Weldman is a leading brand of welding equipment in Poland.

A wide range of Weldman devices meets the needs of not only novice users, but also more advanced ones. Depending on the selected model, it can be dedicated to workshop applications as well as for heavy industry.

Customers choose the Weldman brand most often due to its high quality, affordable price and reliability.

Specifications