Suvirinimo aparatas Magnum THF MIG 202 LCD Puls Synergia SPOT TIG AC DC

Trumpai apie prekę

Prekė: Suvirinimo aparatas Magnum THF MIG 202 LCD Puls Synergia SPOT TIG AC DC. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Magnum
• Modelis: Spawarka Magnum THF MIG 202P AC/DC LCD HRS2
• Ilgis: 640 mm
• Plotis: 215 mm
• Aukštis: 360 mm

MANUFACTURER: MAGNUM || WELDING METHODS: MIG/MAG, MMA, FLUX, TIG AC/DC || SELECTED ADVANTAGES: Synergy, Pulse, BiLevel, Spot welding || POWER SUPPLY: 230V 1ph

Power supply parameters:

• Supply Voltage: Single Phase 230V
• Technology: IGBT Inverter
• Network Security: 20A
• Degree of protection: IP 23
• Dimensions: 640x215x360 mm
• Weight: 20kg

MIG/MAG welding parameters:

• MIG/MAG welding current: 40 - 200A
• MIG/MAG cycle: 60% 200A,
• MIG/MAG welding voltage: smooth adjustment
• Wire feed speed: smooth adjustment
• Spool with wire: max 5kg (D200)
• MIG/MAG welding polarity change: YES
• Welding Inductance Adjustment: YES
• Synergistic MIG/MAG programs: YES - 19 programs
• Operating mode in manual settings MANUAL: YES
• Two operating modes: 2T/4T

• Gas flow before welding: 0.1 ÷ 2.0 s
• Gas flow after welding: 0 ÷ 10 s

• Spot welding time (with spot welding): 0.1 ÷ 10 s
• Break time between points (with spot welding): 0.5 ÷ 10 s
• Inductance: -5 ÷ 5

TIG welding parameters:

• TIG DC welding current: 5 ÷ 200A
• TIG AC welding current: 5 ÷ 200A
• Working cycle: 60%
• Welding cycle time at point: 0,2 ÷ 10s
• Gas outflow time before: 0,1 ÷ 2s
• Initial Current: 5-200A
• Current Rising Time: 0 ÷ 10s
• Base Current: Full Range
• Welding Current/Peak Current: Full Range
• Pulse Balance: 5 ÷ 95%
• Pulse Frequency: 0,5 ÷ 999Hz
• AC balance: -5 ÷ 5%
• AC frequency: 50 ÷ 250Hz
• Current drop time: 0 ÷ 10s
• Final Current: Full Range
• Gas outflow time after: 0 ÷ 10s
• Bi Level: 2 ÷ 10s

MMA welding parameters:

• MMA welding current: 5 - 200A
• Electrode diameter: 1,6 - 4,0 mm
• MMA Welding Current Adjustment: Smooth
• Arc Force Function: YES
• Hot Start Function: YES

▶ ADVANCED WELDING SOURCE - WELD WITHOUT RESTRICTIONS

THF MIG 202 LCD AC/DC Synergy brand Magnum is a technologically advanced welding device designed for manual, electric welding of all weldable metals and alloys, e.g. low carbon steels, low alloy steels, high alloy steels, stainless and acid resistant steels, aluminum and its alloys, copper, etc. The welding machine is designed for all kinds of welding work wherever reliability and versatility of use are required.

The power source was built on the basis of the latest technology using IGBT transistors, which translates into reduced electromagnetic interference, low power losses, increased efficiency and reliability of the power source and lower energy consumption. The PFC system used in the welding machine reduces current losses and increases the power output of the welding machine when powered from a single-phase 230V network.

The device has a clear color LCD display and an intuitive, easy-to-use control panel that allows for quick and precise selection of individual welding parameters.

ADVANTAGES OF THE DEVICE:

• smooth adjustment of all welding parameters,
• synergy - the device has synergistic programs,
• manual mode settings,
• Euro socket- the possibility of using any MIG holder equipped with a EURO plug,
• accurate adjustment of the length of the welding arc,
• regulation of welding inductance - wider face and smaller melt or narrow face and deep melt? Choose the optimal settings for the work you are currently doing,
• readable LCD display showing all parameters,
• 19 synergistic programmes,
• PFC - system reduces current losses and increases the power output of the welding machine when powered from a single-phase 230V network.

Advantages for TIG function:

• possibility of TIG AC/DC HF welding,
• Bi-Level function - full control of heat entering the material - switching between two set values of welding current, without the need to extinguish the arc,
• TIG welding with pulse - allows you to control the amount of heat supplied to the welding lake,
• point welding - allows bonding of thin materials.

✳ Professional wire feeder ✳

Professional 2R feeder - reliable and precise wire feeding, thanks to the use of a professional feeder - ensures smooth wire feeding to the handle and stable welding parameters.

Handle with TIG SR 26 4M control

The device is equipped with a TIG SR 26 welding torch length 4m, with a high current capacity, so it can withstand work even in long cycles. The handle also has remote control in the handle, which definitely facilitates work and it is possible to change the current during welding.

We add consumable parts to each handle to start, so that the handle is armed and ready to work.

⚡ AC/DC ⚡

AC and DC welding. It is the possibility of precise welding of virtually all weldable materials in the TIG method.

Solid workmanship

The power source is based on IGBT transistors that provide a minimum of electromagnetic interference, allowing you to increase the efficiency and reliability of the device.

The compact and compact design makes the device applicable in workshop and repair work, both in halls and in the field. The transport handle makes it easy to carry the device.

• Device Magnum THF MIG 202P AC/DC Synergy LCD
• MIG MB-24/3m welding torch
• TIG SR-26/4m welding torch with remote control
• MMA Electrode Cable
• Bulk cable
• User manual in Polish

+ MAG WELDING KIT WITH CYLINDER AR/CO2

• factory new, certified cylinder for Ar/CO2 with a capacity of 8l - has the approvals required by gas sales points,
• Ar/CO2 gas reducer with two clocks,
• gas line,
• steel welding wire SG2 5kg 0,8mm (D200),
• starter set of burner parts.

+ set of wires for TIG welding of black steel, stainless steel and aluminum.

Photo gallery:

Specifications