OBD2 sąsaja Fiat K-Line FiatEcuScan MultiEcuScan VAG KKL

Trumpai apie prekę

Prekė: OBD2 sąsaja Fiat K-Line FiatEcuScan MultiEcuScan VAG KKL. Kategorija: Diagnostikos testeriai ir sąsajos.

• Gamintojas: CCY
• Modelis: 200022

OBD2 interface Fiat K-Line for FiatEcuScan MultiEcuScan + VAG KKL

The subject of sale is the FiatEcuScan + VAG KKL USB diagnostic interface for FIAT - ALFA ROMEO - LANCIA cars and for the VAG group (VW, AUDI, SEAT, SKODA).

• Latest version of interface on FTDI chip with two K lines

The set includes :

• FiatEcuScan USB diagnostic interface in OBD2 plug
• FTDI drivers for Windows 32 / 64 bit systems
• instructions for installation and configuration of the interface

You will receive the downloadable materials in electronic version for free. You will find a lot of useful information, procedures and instructions in them :

• drivers - Win7/Win10 - 32/64 bit
• instructions - installation and configuration of the device
• instructions for installation and operation of the software
• Interface User Manual
• diagnostic connector locators in cars
• useful information
• free software in non-commercial version

This interface is used for professional and comprehensive diagnostics, coding and adaptation of cars of the brands FIAT, ALFA ROMEO, LANCIA until 2010 and the group VAG until 2004.

It enables diagnosis of engine, automatic transmission, ABS, Airbag. Interface dedicated to FiatEcuScan - MultiEcuScan with switch supports controllers with diagnostics on line K. Interface works with WINDOWS 7/8/10/11 systems

SWITCH 4 - position

Each controller has its own diagnostic cable, the use of a 4-position switch (unlike other solutions) provides complete security for both the ECU controller in the car and the interface. Damage to the circuit of one ECU does not cause problems with the diagnosis of the others.

SUPPORTED MODULES - DRIVERS

A detailed list of supported models and drivers as well as required interfaces is available on the website of the manufacturer’s of the MultiEcuScan.

For some supported drivers you need an ELM327 v2 interface or an adapter from the OBD2 socket to the Fiat 3 pin plug. Available in our offer.

Engine Management

• Bosch EDC15 - Bosch EDC15C7 - Bosch EDC16/CF3 Multijet - Bosch EDC16/CF4 Multijet - Bosch EDC16/CF5 Multijet
• Marelli 6JF Multijet (1.3) - Marelli 6F3 Multijet (1.3) - Marelli 6F3 Multijet
• Bosch Monomotronic MA1.7.3 - Bosch Motronic M3.7.1 - Bosch Motronic M2.10.3 - Bosch Motronic M2.10.4 - Bosch Motronic M1.5.5
• Bosch Motronic ME2.1 - Bosch Motronic ME3.1 - Bosch Motronic ME7.3.1 - Bosch Motronic ME7.3H4 - Bosch Motronic ME7.3H4M - Bosch Motronic MED7.11
• Hitachi MPI
• Lucas DPNC TD100 - Lucas EPIC DCU3F
• Magneti Marelli IAW 5NF - Magneti Marelli IAW 4AF/4EF/59F/5AF - Magneti Marelli IAW 49F (1.6)

Gearbox Management

• Marelli SELESPEED (old Alfa 156 SELESPEED)
• Marelli SELESPEED CFC208F
• Marelli SELESPEED CFC208F (Punto '03, Idea, 147, GT, Ypsilon, Musa)
• Marelli SELESPEED CFC209F
• Marelli SELESPEED CFC218F (156 GTA)
• Marelli SELESPEED CFC228F (Punto, Panda, Idea, Musa, Ypsilon)
• Marelli SELESPEED CFC300

Airbags

• TRW MY97 Airbags
• TRW MY99 Airbags
• SIEMENS MY99 Airbags
• ALLIED MY97 Airbags
• BREED MY97 Airbags
• Autoliv MY06 Airbags

Body/Dashboard/Misc.

• Bosch XENON headlights
• Litronic XENON headlights

ABS

• Bosch ABS 5.7 VDC/ASR/TC
• Bosch ABS 8 VDC/ASR
• Lucas ECB 430 ABS
• Bosch ABS Teves MK20/MK70
• Bosch ABS 5.3
• Bosch ABS 5.3 TC
• Bosch ABS 5.3 ASR
• TRW Lucas ABS

Electric Power Steering

• TRW Electric Power Steering
• Delphi Electric Steering

FUNCTIONS :

• reading of ECU identification data
• reading error codes,
• erasure of fault codes (AIR BAG, ABS, IMMOBILIZER, ENGINE, ETC. )
• erasure of oil inspections,
• erasure of service inspections
• diagnostics of the engine and other components,
• Reading parameters during operation of the Live Data engine.
• Preview of parameter charts
• Export diagnostic data to CSV file
• test of implementing elements
• adaptations , coding
• detailed description of fault codes, parameters and actuators.
• reset/Programming functions

Compatible software:

Interface dedicated to FiatEcuScan - MultiEcuScan. Also works with: VAG-COM up to version 409-1, VCDS Lite 1.2, Polish VAG, VWTool, GMTool, AlfaDiag, DDT2000, Subaru FreeSSM

FIAT GROUP - ALFA ROMEO - LANCIA

ALFA ROMEO

• ALFA 145 1998 1.4 TS 16V, 1.6 TS 16V, 1.8 TS 16V, 2.0 TS 16V; 1999 1.9 JTD; 1.3, 1.4 TS 16V, 1.6, 1.6 TS 16V, 1.7 16V, 1.8 TS 16V, 2.0 TS 16V, TD
• ALFA 146 1998 1.4 TS 16V, 1.6 TS 16V, 1.8 TS 16V, 2.0 TS 16V; 1999 1.9 JTD; 1.3, 1.4 TS 16V, 1.6, 1.6 TS 16V, 1.7 16V, 1.8 TS 16V, 2.0 TS 16V, TD
• ALFA 147 1.6 TS 16V (105HP), 1.6 TS 16V (120HP), 1.9 JTD, 1.9 JTD 16V, 2.0 TS 16V, GTA 3.2 V6, GTA Selespeed, Selespeed
• ALFA 156 2002 1.6 TS 16V, 1.8 TS 16V, 1.9 JTD, 1.9 JTD 16V, 2.0 TS 16V, 2.4 JTD 10V, 2.4 JTD 20V, 2.5 V6 24V, GTA 3.2 V6, GTA Selespeed, JTS 2.0, JTS Selespeed, Selespeed; 1.6 TS 16V, 1.8 TS 16V, 1.9 JTD, 2.0 TS 16V, 2.4 JTD, 2.5 V6 24V, Selespeed
• ALFA 159 1.9 MJET 16V, 1.9 MJET 8V, 2.4 MJET 20V
• ALFA 166 2003 2.0 TS 16V, 2.4 JTD 20V, 2.5 V6 24V, 3.0 V6 24V, 3.2 V6 24V; 2.0 TS 16V, 2.0 V6 TB, 2.4 JTD, 2.5 V6 24V, 3.0 V6 24V
• ALFA BRERA 2.4 MJET 20V
• ALFA GT 1.8 TS 16V, 1.9 JTD 16V, 3.2 V6 24V, JTS 2.0
• ALFA GTV 2003 2.0 JTS, 2.0 TS 16V, 3.2 V6 24V; 1998 1.8 TS 16V, 2.0 TS 16V, 2.0 V6 TB, 3.0 V6 24V; 2.0 TS 16V, 2.0 V6 TB, 3.0 V6 24V
• ALFA SPIDER 2003 2.0 JTS, 2.0 TS 16V, 3.2 V6 24V; 1998 1.8 TS 16V, 2.0 TS 16V, 2.0 V6 TB, 3.0 V6; 2.0 TS 16V, 3.0 V6

FIAT

• FIAT BARCHETTA 16V, 16V ASPIRATO CF3
• FIAT BRAVO-BRAVA 2001 100 16V CF3, 115 16V CF3, 80 16V CF3, JTD 100 CF3; 1999 100 16V, 115 16V, 155 20V, 80 16V, JTD 105; 1.4 12V, 1.6 16V, 1.8 16V, 1.9 D, 1.9 TD (100HP), 1.9 TD (75HP), 2.0 20V
• FIAT COUPE 2001 1.8 16V CF3; 1996 1.8 16V, 2.0 20V, 2.0 TURBO 20V; 1998 1.8 16V, 2.0 20V; 16V ASPIRATO, 16V TURBO
• FIAT CROMA 2005 1.9 MJET 16V, 1.9 MJET 8V, 2.4 MJET 20V
• FIAT DOBLO 1.2 8V, 1.6 16V, 1.9 JTD
• FIAT DUCATO 2006 2.2 JTD, 2.3 JTD, 3.0 JTD; 1.9 TDS ECO, 2.0 BZ KAT, 2.0 JTD, 2.8 DS, 2.8 JTD, 2.8 TDS; RST 2.0, RST 2.0 JTD, RST 2.3 JTD, RST 2.8 JTD, RST BIPOWER-GPOWER
• FIAT FIORINO 1242 BENZINA
• FIAT IDEA 1.2 16V, 1.3 JTD, 1.4 16V, 1.4 8V, 1.8 8V, 1.9 JTD
• FIAT MAREA 2001 100 16V CF3, 150 20V CF3, JTD 110 CF3; 1999 100 16V, 115 16V, 155 20V, 80 16V, JTD 105, JTD 130; 1.4 12V, 1.6 16V, 1.6 16V GASOLINA, 1.8 16V, 1.9 TD (100 HP), 1.9 TD (75 HP), 2.0 20V, 2.4 TD
• FIAT MULTIPLA 2002 1.6 16V, 1.9 JTD, BIPOWER-GPOWER, BLUPOWER; 1.6 16V, 1.9 JTD, BIPOWER, BLUPOWER
• FIAT PALIO 1.2 16V, 1.9 D, 1108 BENZINA, 1242 BENZINA, 1242 BENZINA CF3, 1299 BENZINA, 1372 BENZINA, 1497 ALCOOL, 1497 GASOLINA, 1580 16V BENZ. CF3, 1580 16V BENZINA, 1580 16V GASOLINA, 1580 8V BENZINA, 994 ALCOOL, 994 BENZINA, 994 GASOLINA, 999 GASOLINA; RST 1.0 16V, RST 1.0 8V, RST 1.2 16V, RST 1.2 8V, RST 1.3 JTD, RST 1.5 8V, RST 1.6 16V, RST 1.6 8V, RST 1.7 TD, RST 1.9 D, RST 1.9 JTD; RST 2 1.2 16V, RST 2 1.3 JTD, RST 2 1.4 8V, RST 2 1.6 16V, RST 2 1.7 TD, RST 2 1.8 8V, RST 2 994; TD
• FIAT PANDA 2003 1.1 8V, 1.2 8V, 1.3 JTD; 2006 1.4 16V; 1100 I.E. 4X4 ECO, 1100 I.E. ECO
• FIAT PUNTO 2003 1.2 16V, 1.2 8V, 1.3 JTD, 1.4 16V, 1.8 16V, 1.9 JTD, BIPOWER; 1999 1.2 16V, 1.2 8V, 1.8 16V, 1.9 D, 1.9 JTD; 55, 60, 75, 75 98, 85 16V, 90, D, GT, SELECTA, TD
• FIAT SEICENTO 1108, 1108 CF3, 899, CITYMATIC, ELETTRA
• FIAT SIENA 1.7 8V
• FIAT STILO 1.2 16V, 1.4 16V, 1.6 16V, 1.8 16V, 1.8 8V, 1.9 JTD, 1.9 JTD 16V, 2.4 20V, SELESPEED
• FIAT UNO 1242 BENZINA

LANCIA

• LANCIA DEDRA 1998 1.6 16V
• LANCIA DELTA 1998 1.6 16V, 1.8 16V
• LANCIA K 1998 2.4 JTD; 1999 2.0, 2.4, 3.0; 2.0, 2.0 TURBO, 2.4, 2.4 TD, 3.0
• LANCIA LYBRA 1.6, 1.8, 1.9 JTD, 2.0, 2.4 JTD
• LANCIA MUSA 1.3 JTD, 1.4 16V, 1.4 8V, 1.9 JTD
• LANCIA THESIS 2.0 20V TB, 2.4 20V, 2.4 JTD 10V, 2.4 JTD 20V, 3.0 V6 24V, 3.2 V6 24V
• LANCIA Y 1.1, 1.2, 1.2 16V, 1.2 16V CF3, 1.2 CF3, 1.4
• LANCIA YPSILON 2006 1.2 8V, 1.3 JTD, 1.4 16V; 1.2 16V, 1.2 8V, 1.3 JTD, 1.4 16V

• After setting the switch to the appropriate position, the interface also works as VAG KKL works with VAG-COM programs up to version 409-1, VCDS Lite, VWTool, GMTool, AlfaDiag.

GROUP VAG

The interface also supports brands: VW, Audi, Seat, Skoda - 1988 -2004

• AUDI all models until 2004
• SEAT all models until 2004
• Seat Ibiza to 2007( 6K/6L )
• SKODA all models until 2004
• Skoda Fabia I to 2007
• Skoda Octavia I to 2007
• VOLKSWAGEN all models until 2004
• VWPolo to 2007 ( 9N )
• Ford Galaxy 1.9 TDI to 2004

For older models before 1995, you need a 2x2 pin adapter available in our offer.

ATTENTION. Exception: VW Touran and Golf V are cars on the CAN diagnostic rail - the interface will not connect to them. We will advise which device is best to choose.

Hardware requirements :

• Interface made in smd technology. The latest version of the chipset!!!
• Built-in original matching OBD2 plug.
• The device is connected to the computer via USB.
• Works with operating systems: Windows XP, Vista, Windows 7, 10 - 32/64 bit.

[Product code: jAlswGhL7e naTmroG1un 6y90/Ne0vI zM]

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	CCY
Parametry	Product weight with unit packaging	0.09 kg
Parametry	EAN (GTIN)	5908258861761
Parametry	Manufacturer code	200022
Parametry	Batteries included	no