Monitorius DPF SDPROG DASH MICRO V5 OBD2 AUDI SEAT SKODA VOLKSWAGEN

Trumpai apie prekę

Prekė: Monitorius DPF SDPROG DASH MICRO V5 OBD2 AUDI SEAT SKODA VOLKSWAGEN. Kategorija: Diagnostiniai testeriai ir sąsajos.

• Gamintojas: SDPROG
• Modelis: SDDASHMICROV5

✅ Model V5 – Compatible with selected models Audi, Seat, Skoda, Volkswagen

The device is dedicated to selected models and engines of the VAG group. Check the compatibility in the list below to match the product to your car.

Other variants of the SDPROG DASH MICRO are available at other auctions, matching other brands, models and engines. Please check compatibility before purchasing to make sure you are choosing the right product!

✅ Real-time DPF Monitor

Compact device for monitoring DPF filter without the use of applications. The best choice if you want to keep track of the filter status and know when the vehicle starts regeneration.

• Real-time DPF monitoring
• Information on the indicative level of soot and regeneration process
• Works without app and without phone
• Colorful LED and sound notifications
• Device selected for a specific vehicle

✅ Full List of Compatible Models and Engines (V5)

AUDI

• A3 (8V): 1.6 TDI — (Engine codes: DDYA, DGTE)
• A4 (B9): 2.0 TDI — (Engine code: DTPA)
• A6 (C8) / A7 (C8): 2.0 TDI (codes: DTPA, DTPB) | 3.0 TDI (code: DDVE)
• Q2 (GA / GAB): 1.6 TDI (codes: DDYA, DGTE) | 2.0 TDI (code: DXRB)
• Q5 (FYB): 2.0 TDI — (Engine code: DTPA)

SEAT

• Arona (KJ7): 1.6 TDI — (Engine codes: DGTD, DGTE)
• Ateca (KH7): 1.6 TDI — (Engine codes: DDYA, DGTE)
• Ibiza (KJ1): 1.6 TDI — (Engine codes: DGTA, DGTD)
• Leon (5F1): 1.6 TDI — (Engine codes: DDYA, DGTE)
• Leon (KL): 2.0 TDI — (Engine code: DXRB)

ŠKODA

• Kamiq (NW4) / Scala (NW1): 1.6 TDI — (Engine codes: DGTA, DGTD)
• Karoq (NU): 1.6 TDI (codes: DDYA, DGTE) | 2.0 TDI (code: DXRB)
• Octavia III (5E): 1.6 TDI — (Engine codes: DDYA, DGTA, DGTE)
• Octavia IV: 2.0 TDI — (Engine code: DXRB)

VOLKSWAGEN (VW)

• Golf VII: 1.6 TDI — (Engine codes: DDYA, DGTE)
• Polo VI / T-Cross: 1.6 TDI — (Engine code: DGTD)
• T-Roc (A11): 1.6 TDI (code: DGTE) | 2.0 TDI (code: DXRB)
• Crafter (SY) / Grand California Camper: 2.0 TDI — (Engine code: DAUA)
• Transporter (T6): 2.0 TDI — (Engine codes: CXEB, CXHA, DNAA)
• Multivan (T6): 2.0 TDI — (Engine codes: CXEB, CXEC, DNAA)
• California (T6): 2.0 TDI — (Engine codes: CXEB, CXEC, CXHA, DNAA)
• Caravelle (T6): 2.0 TDI — (Engine code: CXEB)

*Don't see your model / engine? Check other variants of the SDPROG DASH MICRO device!

✅ Take care of your vehicle and avoid costly breakdowns

Improper operation of the car during the regeneration of the DPF / FAP / GPF filter can lead to serious problems:

• Stop firing – Turning off the engine during regeneration increases the risk of failure.
• Overload of the system – Improper firing affects higher fuel consumption and possible damage.
• High repair costs – Errors in use can lead to expensive faults and diagnostics.

✅ Intuitive visualization of filter status as diode color indication:

• Blinking blue: Attempting to connect to the vehicle
• Blinking green: Very low soot level - after driving a few km, the diode should start to glow green. It can also mean trying to read the amount of soot.
• Green: Low soot – the filter is clean and ready for further driving
• Yellow: Partially clogged filter – it’s time to prepare for the regeneration process
• Red: High level of soot – the filter is heavily contaminated
• Blinking red: Indicates that the firing process is ongoing. At this point, it is absolutely necessary to continue driving so that the regeneration procedure can be completed – never stop this process by turning off the vehicle!

✅ Precise sound notifications:

• Start firing: Four times the sound signals indicate that the filter is just entering regeneration mode
• Completion of the procedure: Double beeps confirm the completion of firing

✅ Benefits of using SDPROG DASH MICRO

• Optimal use of the vehicle:The system provides up-to-date information on the status of the filter, enabling appropriate travel planning. This allows you to choose the route or moment when the filter regeneration will go smoothly, avoiding sudden interruptions in driving.
• Safety and economy:Recovery cycle control avoids the risk of damage to the engine and exhaust system, resulting in lower repair costs and greater safety on the road.
• Easy installation:Connect SDPROG DASH MICRO to OBD2 connector – the device works immediately, without the need to install additional applications or carry out complicated configuration.
• Energy saving and compact size:With sleep mode, the device minimizes power consumption, and the small size allows easy installation even in limited space. The device is very energy-efficient, in sleep mode it consumes only a few milliamperes so you do not have to worry about draining the battery.

✅ Set includes:

• SDPROG DASH MICRO
• User manual

✅ About the brand SDPROG

The idea for SDPROG was created in 2012 to simplify the use of diagnostic functions for both drivers and mechanics. Since then, thanks to its dynamic development, SDPROG has become an indispensable tool for every user. Hundreds of professionals and automotive enthusiasts have already trusted him – join them and see how easy and effective diagnostics with SDPROG can be.

Specifications