Pusiau automatinis inverterinis suvirinimo aparatas MIG/MAG/MMA/TIG, pilnas rinkinys

Trumpai apie prekę

Prekė: Pusiau automatinis inverterinis suvirinimo aparatas MIG/MAG/MMA/TIG, pilnas rinkinys. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: no brand
• Modelis: 106 KR

MIG ⭐ MMA ⭐ FLUX ⭐ TIG-LIFT

Every even the simplest INVERTER is incomparably BETTER than even the most expensive outdated transformer

✅ The device from the MAJSTER Poland series is a semi-automatic welding machine designed for manual, electric welding of steel with self-shielding wire (FCAW Flux-Cored Arc Welding method), MIG/MAG, MMA, as well as the TIG Lift method (this requires the purchase of an additional TIG Lift welding handle)

The FCAW method is arc welding with core (powder) wire.

It is a welding method similar to the MIG/MAG method, except that the wire inside is filled with flux or a chemical that produces protective gases during welding.

FCAW welding combines the advantages of both wrapped electrode welding and MAG welding: very high efficiency (no need to change the electrode frequently) can also be welded outdoors (the flux also protects against weld oxidation) the welder does not have to have very high qualifications.

It is designed for all kinds of welding work, in locksmith workshops, repair workshops, bodywork, farm, etc.

The power source was built on IGBT transistors providing a minimum of electromagnetic interference, small power losses in basic systems, enabling increase in efficiency and reliability of the power source, lower consumption

❤️‍ Unbeatable Market Prices, very tempting, but does the cheapest offer come with sufficient quality for the job?

Is Cheapness Equal to Quality? Where's the Difference?

-

❤️‍ When buying at the lowest market prices, remember that a small price difference translates to a big difference in quality and service ⭐⭐⭐⭐⭐

-

✅ Majster's Workmanship Quality means:

Long-lasting materials used in production, Door-to-Door Care for a full 2 years - Help and Support for Customers

Majster confirms its Quality this way⭐⭐⭐⭐⭐

-

✅ A well-thought-out, improved, and highly popular design over the years, this is not a disposable item,

We create budget-friendly BUT! - fully reliable, good quality, work-proven, trouble-free equipment!

• - Bulk cable ⭐
• - Electrode cable ⭐
• - Integrated MIG ⭐ handle
• - Hand mask ⭐
• - Brush with hammer ⭐

✅ + SELF-SHIELDING WIRE 0,8 MM 0,45 KG - 2 pieces

Self-shielding welding wire for welding steel elements without the use of shielding gas.

The use of wire allows welding without the need for additional shielding gas.

✅ Ready set for welding WITHOUT GAS!

.

❇️ ➖ When welding with the MMA method, connect the ground cable to the ➖ (minus) terminal ❇️

✴️ ➕ To weld with self-shielding wire using the FLUX method, connect the ground cable to the ➕ (plus) terminal ✴️

TIG Lift handle is not included in the offer (to be purchased separately)

⏩ The device from the MAJSTER Poland series is a semi-automatic welding machine designed for welding steel in a gas shield and self-shielding wire FCAW (FLUX), MIG/MAG, MMA, as well as the TIG Lift method (this requires the purchase of an additional TIG Lift welding handle)

⭐ It is intended for all kinds of welding work, in locksmith workshops, repair workshops, bodywork, farm, etc.

✅ The power source was built on IGBT LATEST GENERATION transistors ensuring minimum electromagnetic interference, small power losses in basic systems, enabling increase in efficiency and reliability of the power source, lower consumption

⏩ The welding machine works with 1 kg wire and 0.8-1.0mm diameter

The FCAW method is arc welding with core (powder) wire.

⭐ This is a welding method similar to the MIG/MAG method, except that the wire inside is filled with flux or a chemical that produces protective gases during welding.

⏩ FCAW welding combines the advantages of both wrapped electrode welding and MAG welding: very high efficiency (no need to change the electrode frequently) can also be welded outdoors (the flux also protects against weld oxidation) the welder does not have to have very high qualifications.

✅ SPECIFICATION:

• Model: MP-0106
• Power greater than 90% of allegro 200A
• Real current MIG: 40-130A
• MMA real current: 20-130A
• Supply voltage: 230V
• Frequency: 50Hz
• Rated Input Capacity: 3,7KVA
• Welding methods: FLUX - semi-automatic welding with self-shielding wire "without gas"
• Electrode range: 1,6-4 mm
• Wire diameter: 0.6 - 0,8 mm
• Wire spool weight: max 1kg
• Rated welding cycle: 60%
• Working cycle: 25%
• Efficiency: 85%
• Degree of protection: IP21S
• Degree of protection: H
• Weight: 5,6kg

✅ COMPOSITION OF THE SET:

• MP-0106 welder
• Hand mask
• Brush with hammer
• Bulk cable
• Electrode cable
• Integrated MIG handle
• Self-shielding wire 0.8mm 0.45kg - 2 pieces
• User manual in Polish,
• Original packaging

⏩ Welding/Magnetic Angle Bracket 11.5kg

SPECIFICATIONS:

• Measurement Angles: 45, 90, 135
• Load Capacity: 11.5 kg
• Accuracy: 0.5%

APPLICATIONS

• Pipe Assembly
• Marking
• Fastening
• Soldering
• Welding

DESCRIPTION

A magnetic angle bracket that allows for precise and durable material positioning at 45, 90, or 135 degrees. It's an indispensable helper for welding or soldering, and it's both affordable and reliable. The product is built with strong, high-durability magnets, further protected by a casing made of highly resistant plastic, all within a sturdy steel housing. It's an invaluable aid in welding, metal component assembly, soldering, and layout marking.

Color for illustration purposes only

Welding gloves, of very good quality, are made from split cowhide leather with black piping along the seams.

The long cuff - 15cm - provides additional protection for wrists and forearms against burns or injuries.

The total length of the glove is approximately 35cm

A leather strip is sewn between the fingers in the palm, which increases the gloves' durability during work.

Inside, a soft cotton lining significantly enhances work comfort.

Protection Category II

Composition: 100% leather, cotton lining

Product complies with standards: CE, EN 407, EN 388, EN 12477 Type A

Color for illustration purposes only

Popularly called hot start, it allows by temporarily increasing the welding current above the value set by the welder. HOT START works at the moment of arcing and is designed to prevent the electrode from sticking to the material. It is a great convenience when lighting the electrode.

cuts/minimizes welding voltage and current in case of short circuit of the electrode with the welded material. ANTI STICK allows the welder to detach the electrode more easily.

stabilizes the arch regardless of its length. Regulates the dynamics of the welding arc. By reducing the value of the function, it gives a soft arc and a smaller depth of melt, while increasing the value of the function causes deeper melting and the possibility of welding with a short arc. At the highest value for the ARC FORCE function, it is possible to "press the electrode into a lake of molten metal and burn the material through.

.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	no brand
Parametry	Manufacturer code	106 KR
Parametry	EAN (GTIN)	5907244520347
Parametry	Model	106 KR