Hidraulinis keltuvas automobilio Frog, žemo profilio, 2,5 t, lagaminas

Trumpai apie prekę

Prekė: Hidraulinis keltuvas automobilio Frog, žemo profilio, 2,5 t, lagaminas. Kategorija: Bėgių keltuvai („Frogs“).

• Gamintojas: Lehmann
• Modelis: PODNOŚNIK SAMOCHODOWY LEWAREK 2,5T WALIZKA

🔧 Not the lift itself. Ready set for the garage

The lift is useful when you need to change the wheels or do work on the car. The problem begins later: the heavy device needs to be stored somewhere, moved and kept organized around it.

Therefore, in this version you get an extended set: 2,5 t lift, transport case and gloves.

You remove the set. You are doing the work. You pack it back.

A standard lift after completion of work is often placed somewhere against the garage wall.

In this version, you get a matched suitcase, thanks to which it is easier to keep the equipment in one place, move it and organize it after the work.

This is especially practical if you do not have a large workshop and you want to organize your garage equipment.

You may have a device capable of lifting a heavy car, but if it’s difficult to slide it under the right point of the chassis, the high lifting capacity alone doesn’t change much.

Therefore, it is important to combine the low initial height of 85 mm, the lifting range of up to 360 mm and the maximum lifting capacity of 2500 kg.

These are parameters that work together during real work on the car.

The structure is equipped with wheels, thanks to which the lift can be moved more comfortably on even and hard ground.

This makes it easier to position the paw exactly where the car manufacturer provides for lifting the vehicle.

After finishing work, you can hide the device in the included suitcase.

The lift can operate with a maximum load of 2500 kg.

This allows it to be used on many passenger cars, of course, with the permissible load, correct vehicle support points and rules for safe use.

This parameter is prepared for typical work performed in the home garage.

Without an overlay, the lifting point is already at a height of 85 mm.

The low design makes it easy to slide the lift under the vehicle and position it at the right point.

After applying the overlay, the minimum height is 125 mm, so you can choose the method of support for the work.

The lift has dimensions:

53,5 × 20,3 × 12,5 cm

The weight of the device is 10,5 kg.

With the suitcase, you have a designated place to store the set, instead of leaving the lift loose in the garage.

Lifting the vehicle is done by working with the handle of the lift.

The hydraulic mechanism allows you to gradually increase the height, and the proper operation of the valve allows you to lower the arm later controlled.

You do not need complicated settings – you set the device at the right point and start working.

The kit includes two rubber pads that can be used when lifting the vehicle.

Rubber provides an additional layer between the lift element and the car support area and helps to limit direct contact between metal surfaces.

You get the necessary overlays together with the device.

When the device is correctly positioned, the support point can be lifted to a height of 360 mm.

So you get a combination of a low starting position with the range needed for many typical car jobs.

From 85 to 360 mm — one device, wide working range.

When changing the wheel or working on the car, it is easy to get your hands dirty with grease, dust and dirt on the chassis elements.

Therefore, the extended set also includes a set of gloves.

You do not have to complete the basic accessories separately – together with the lift you get elements prepared for its practical use.

The lift itself is based on the proven, standard LEAD design.

The difference is in the set you get.

In this version you get:

• ✅ hydraulic lift 2,5 t,
• ✅ case for storage and transport,
• ✅ gloves,
• ✅ rubber pads,
• ✅ elements needed to operate the lift.

So you buy not only a device, but a more orderly garage set.

The lift usually goes to the garage before seasonal wheel changes, but it can also be used during other activities that require lifting the vehicle.

It will work during:

• seasonal wheel replacement,
• basic garage work,
• service activities requiring lifting the car,
• access to elements under the vehicle,
• preparing the car for further service.

After finishing work, you can put the equipment back in the suitcase.

In this offer you get:

• ✅ hydraulic car lifter,
• ✅ transport case,
• ✅ set of gloves,
• ✅ castors,
• ✅ lifting paw cap with rubber tip,
• ✅ handle,
• ✅ carrying handle,
• ✅ two rubber pads.

⭐ Lift + suitcase + gloves

It is the extended set that constitutes the main advantage of this version.

This is especially true for people who:

• they change the wheels themselves,
• they do basic work on the car,
• complete the equipment of the home garage,
• they need a low profile lift,
• want a lifting capacity of up to 2,5 t,
• do not want to store the device in bulk,
• appreciate the suitcase and gloves received immediately in the set.

If the parameters of the lift itself are similar, the convenience of the purchase begins to be determined by what you receive with it.

• Brand: Lehmann
• Type: frog type hydraulic lift
• Maximum lift capacity: 2500 kg
• Minimum height without overlay: 85 mm
• Minimum height with overlay: 125 mm
• Maximum lifting height: 360 mm
• Dimensions of the lift: 53,5 × 20,3 × 12,5 cm
• Lift weight: 10,5 kg

Additional elements of this version:

• transport case,
• a set of gloves.

Is the wheel change over?

You do not have to leave the equipment in bulk on the garage floor.

The lifter, suitcase and gloves form a complete set prepared not only for the work itself, but also for what happens to the equipment before and after its execution.

You take it out. You're picking it up. You're doing the work. You hide.

And this version is different from the standard lift.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Product weight with unit packaging	11.5 kg
Parametry	Brand	Lehmann
Parametry	Manufacturer code	PODNOŚNIK SAMOCHODOWY LEWAREK 2,5T WALIZKA
Parametry	EAN (GTIN)	5905388903231
Parametry	Lifting capacity	2500 kg
Parametry	Minimum lifting height	85 mm
Parametry	Maximum lifting height	360 mm