Hidraulinis 6 tonų keltuvas lagamine CARMOTION

Trumpai apie prekę

Prekė: Hidraulinis 6 tonų keltuvas lagamine CARMOTION. Kategorija: Butelių kėlimo įrankiai.

• Gamintojas: Carmotion
• Modelis: 58577

HYDRAULIC JACK POST JACK 6 TONS

The hydraulic lift is designed for jobs where heavy lifting is required. The simple design and small size of the device guarantee ease of use and reliability for every driver. It has a European CE certificate.

Specification:

• Lifting capacity: 6000kg
• Weight: 4kg
• Minimum height: 200mm
• Maximum height: 385mm
• additional height adjustment with screw in the head (+5cm)
• filling only with hydraulic oil of SAE 10 viscosity grade
• Producer: Carmotion

Assembly and operation:

1. The lift is supplied as an assembled system and does not require assembly or adjustment.
2. Before starting work, about 6 full pumping cycles should be performed with the unscrewed filler valve to ensure proper distribution of the hydraulic oil.
3. Periodic tightening of all screw connections is required - this will increase the safety of use and extend the life of the lift.

Lifting:

Before starting lifting, make sure that the lift operator will have the lift and lifted load in sight when making any movements.

1. With the narrower end of the lift arm, close the release valve by tightening it to the resistance in a clockwise direction.
2. Place the lift under the lifted load in the place intended for the use of lifts so that the load rests centrally on the lift saddle.
3. If necessary, in post lifts, you can unscrew the screw extending to the contact of the lift saddle with the lifted load.
4. Slide the lift frame into the socket. Moving your arm up-down, lift the load to the required height.
5. After lifting, protect the load from falling, e.g. coasters.

Leaving:

Before you start lowering, you need to make sure that the lowered load will not cause injury to the handling.

1. With the narrower end of the lift arm, slowly turn the release valve counterclockwise. Do not unscrew the release valve more than is required to slowly lower the load. Unscrewing the valve too much may cause it to unscrew from the housing.
2. After completely lowering the load, disconnect the arm from the lift, take the lift from under the load.
3. For post lifters, screw in the extension screw if used.

Notes:

1. It cannot be used as a support element set permanently.

58577

Specifications