Guminė rampa LATHI, 20 t, 1 vnt.

Trumpai apie prekę

Prekė: Guminė rampa LATHI, 20 t, 1 vnt.. Kategorija: Pandusai.

• Gamintojas: Lathi
• Modelis: 5907086392591

LATHI Gummirampe is a professional rubber overrun for premium wheel geometry, designed for precise work in car workshops, diagnostic services and vehicle service points.

Raids provide stable vehicle support when performing geometry measurements, helping to reduce the impact of floor unevenness on work accuracy. Thanks to the high rigidity of the structure, they work well where repeatability, safety and reliable positioning of the vehicle count.

✅ professional raids for wheel geometry

✅ Premium class workmanship

✅ stable working platform

✅ for passenger vehicles, commercial vehicles and trucks

✅ high strength up to 20 tons

Precise measurement thanks to a stable platform 🎯

When setting the wheel geometry, it is very important that the vehicle is on a stable and level ground. LATHI Gummirampe helps to eliminate floor unevenness, creating better conditions for accurate measurement.

The long and stable platform allows you to comfortably put the vehicle on the stand, while the rigid design reduces the risk of deformation during operation. This is especially important in professional services, where each measurement should be as accurate and repeatable as possible.

The most important benefits:

🔹 better vehicle stability,

🔹 reducing the impact of uneven flooring,

🔹 greater precision during wheel geometry,

🔹 comfortable work with different types of vehicles,

🔹 no deflections when rolling the car.

Strength up to 20 tons – a solution for hard work 💪

LATHI Gummirampe inruns are distinguished by very high strength – up to 20 tons. This parameter significantly exceeds many standard solutions available on the market, where the typical lifting capacity is sometimes much lower.

Thanks to their robust construction, the ramps are suitable not only for passenger cars, but also for commercial vehicles and trucks.

✅ lifting capacity up to 20 tons

✅ deflection-resistant design

✅ suitable for intensive use

✅ stable vehicle support

✅ longer service life in the daily work of the workshop

It is a solution for services that need equipment resistant to heavy loads and frequent use.

Widely used in workshop and service 🔧

LATHI Gummirampe are designed for professional vehicle operation when measuring and adjusting wheel geometry. They will work wherever stability of the station and safe introduction of the vehicle to the working platform are important.

The product is designed for:

🚗 car workshop

🛠 wheel geometry services

🚘 diagnostic stations

🚚 services of commercial vehicles

🚛 Handling points for heavy goods vehicles

🔩 professional measuring stations

Raids do not slide on the floor, which reduces the problem of slipping and increases the safety of use. This is especially important in places where equipment is used every day.

The most important advantages of LATHI Gummirampe ⭐

LATHI Gummirampe is a combination of stability, durability and precision that are crucial when working with wheel geometry. Robust workmanship helps maintain measurement accuracy, and high load resistance makes the raids work well in demanding workshop environments.

Key features of the product:

✅ long and stable platform,

✅ elimination of floor inequalities,

✅ strength up to 20 tons,

✅ rigid structure without deflections,

✅ no sliding on the floor,

✅ application to passenger vehicles, vans and trucks,

✅ solid premium workmanship

If you are looking for durable and stable wheel geometry inruns that will work well in professional workshop work, LATHI Gummirampe will be the right choice. 🚘

1 What are LATHI Gummirampe raids used for?

LATHI Gummirampe inruns are used to work with wheel geometry. They help to stably position the vehicle on the stand and reduce the impact of floor unevenness on the measurement accuracy.

2 What is the maximum load capacity of the inruns?

The ramps have a strength of up to 20 tons, making them suitable for passenger cars, commercial vehicles and trucks.

3 Do the raids bend under the vehicle?

The ramps are designed as a rigid structure that reduces deflections. This helps to maintain repeatability and accuracy of geometry measurements.

4 Are raids suitable for trucks?

Yes. With a strength of up to 20 tons, the ramps can also be used on heavy goods vehicles, as long as the use is carried out in accordance with the intended purpose and safety rules.

5 Do the raids move on the floor?

The raids are made of a material that limits slipping on the floor. Thanks to this, they provide greater stability and comfort in the workshop.

6 Is the product suitable for professional workshop?

Yes. LATHI Gummirampe are premium raids designed for intensive work in services, geometry workshops, diagnostic stations and vehicle service points.

7 Why is stability important for wheel geometry?

Stability affects the accuracy of measurement. If the inrun bends or moves, the geometry result may be less precise. A rigid and stable platform helps to achieve repetitive working conditions.

Specifications