Dviejų kolonų keltuvas REDATS L-240A, 4T, 400V, ilgomis kojomis, APS sistema

Trumpai apie prekę

Prekė: Dviejų kolonų keltuvas REDATS L-240A, 4T, 400V, ilgomis kojomis, APS sistema. Kategorija: Keltuvai stulpams.

• Gamintojas: Redats
• Modelis: 30-11-67

Two-column car lift 4t REDATS L-240A automatic with APS system + oil free

• Brand: REDATS
• Symbol: 30-06-18
• Maximum lifting capacity: 4 tons
• Type: automatic
• Maximum width of the car: 2500 mm
• Reinforcement frame: no
• Arm length range: 700 - 1345 mm
• Floor thickness:30 cm
• Beam: Lower
• Power supply: 400 V
• Lifting time: 50 seconds
• Lifting height: 90 - 1930 mm
• Column base dimensions: 380 x 450 mm
• Limit switch: yes
• Engine power: 2200 W
• Telescopic lift arms: YES
• Meets UDT certification requirements: YES
• Additional Features: Rope guards, symmetrical arms, APS system
• Weight: 610 kg
• Dimensions (W x H): 3365 x 2824 mm

APS system

The innovative APS system saves time when leaving the vehicle. In a classic jack, before the device begins to leave the car, it first lifts it slightly to unlock the ratchets. In this lift, the ratchets release right away, so you gain a few precious seconds. Throughout the year, this saves a lot of time.

What kind of lift is this?

It is an automatic lift with a lifting capacity of up to 4 tons. It is ideal for suspension repairs in passenger cars and light commercial vehicles.

Full automatic

With the automatic lift, you don't run from column to release the locks. All you have to do is press the appropriate button and the device will do it for you. This greatly improves the comfort of work, especially with many repairs.

Versatility

On this lift you can handle vehicles up to 2500 mm wide and weighing up to 4000 kg. You can easily pull the engine out of the SUV or repair the suspension in the van.

Are you tall?

With this lift you can work comfortably under the vehicle thanks to the maximum lifting height of 1930 mm. You don’t have to work under the car all day.

Occupational safety

The limit switch stops the lift when it reaches the maximum height. This increases safety during its use.

Durability for years

The lift has a reinforcement frame and is made of high-quality materials, which ensures high durability during many years of use.

In addition, rope covers protect the chain, actuator and the ropes themselves from dust and dirt, extending the life of the device.

All this reduces the risk of downtime. At REDATS, we know that any downtime means a waste of time and money.

Symmetrical paws

Symmetrical paws with a length of 700 – 1345 mm facilitate the correct positioning of the car and provide more convenient access to its sides.

What should you know about this lift?

• Maximum lifting capacity: 4 tons
• Type: automatic
• Arm length range: 700 – 1345 mm
• Floor thickness: 30 cm
• Beam: lower
• Power supply: 400 V
• Maximum width of the car: 2500 mm
• Lifting height: 9 to 193 cm
• Column base dimensions: 380 × 450 mm
• Reinforcement Frame: YES
• Telescopic lift arms: YES
• Weight: 610 kg
• Dimensions (W) × H. ): 3365 × 2824 mm

Do you want to report the lift to UDT?

Do you want UDT to pick up and put your lift into service? have the eligible team assembled. We will help you - contact us, we will prepare a quote for you for such assembly.

Complete documentation (from the seller)

The lift has the necessary documentation that the seller should provide for registration with the Office of Technical Inspection, i.e. the EC declaration of conformity, the instruction manual in Polish, the protocol of quality control of the lift after assembly.

Remember that in addition to this documentation, you must submit a number of other documents to the Office of Technical Inspection.

Important

The user is obliged to bring the power cord to the device on his own.

Preparation of the substrate

Basic requirements for the preparation of the substrate for the installation of a two-column lift:

• substrate surface 1,5m x 4m x 30cm
• maximum flat surface
• minimum floor thickness: 30 cm
• Class B25 concrete
• 28 days, waiting time for the floor to dry and harden (in the case of a fresh spout)
• The floor must be in the form of a homogeneous concrete slab, with the above-mentioned parameters.

Quality REDATS!

By choosing REDATS you buy from the official distributor of devices of this brand in Poland and Europe. REDATS devices are manufactured in leading factories of this type of equipment, so you do not have to worry about the standards of workmanship or used parts.

Distributor of tools and machines REDATS is a company operating successfully on the Polish and international market since 2006. It is a recognized entity that has already gained the trust of over 500 000 recipients. When buying REDATS machines, you can count on professional and comprehensive support at every stage of the purchase or use of equipment.

Specifications