Automobilio akumuliatoriaus įkroviklis su mikroprocesoriumi, 12V 6A, LCD ekranas

Trumpai apie prekę

Prekė: Automobilio akumuliatoriaus įkroviklis su mikroprocesoriumi, 12V 6A, LCD ekranas. Kategorija: Baterijų įkrovikliai.

• Gamintojas: Foxsur
• Modelis: FOXSUR FBC 1206E Mikroprocesorowy

High-end microprocessor rectifier for charging 12V batteries

Suitable for 6-120 Ah lead-acid batteries, lithium batteries are not suitable.

Suitable for both 12V batteries, works with SLA, WET, MF, FLOODED, GEL, VRLA, AGM, EFB, which means it can be used for batteries in cars, motorcycles, boats, mowers, agricultural vehicles and more.

The device is controlled by a microprocessor - when fully charged, it automatically turns off, keeping the battery ready.

The rectifier is small in size and is extremely easy to use, making it great for home use.

One-button battery control. We choose the appropriate mode of operation (car, AGM battery, motorcycle, impulse charging).

The rectifier is ideal for charging batteries for cars with START / STOP engine. More and more cars have the function of turning off the engine during a stop. The batteries in these cars require special charging.

The rectifier has a special function " repairing batteries discharged to zero . The device uses high and low frequency pulse technology in this mode, it has a good effect of repairing and activating a very heavily discharged battery. We use this function when charging batteries that are completely discharged or have been idle for a long time and cannot be charged with other rectifiers.

Product size: 15,8 x 8,5 x 6,3 cm.

Net weight: 440 g.

Length of output cable: 55 cm,

Input cable length: 70 cm.

Input voltage: AC 110 - 220 V (50 - 60 Hz).

Output current: 6A

Output voltage without load: 13.8 V

Minimum initial voltage: > 8 V

Weight: 440g

Efficiency: > 85%

Power: 130 W (max.)

Made of high quality ABS plastic, IP65 waterproof.

The battery charger provides protection against reverse polarity, short circuit, overvoltage, low voltage, overcurrent and overheating, feedback, against electric shock (fully wrapped crocodile clamps are robust and safe to use).

It has the function of maintaining a constant pulse current, stops when fully charged and prevents overcharging and discharge.

The device has a fireproof coating

The equipment has an aluminum heat sink, and a quiet, very powerful fan for heat dissipation, which significantly extends the life of the charger and protects the equipment from overheating.

The device has a very thick wire of pure copper.

Full load testing and Burn-In-Tests confirm high reliability, stable performance and longer service life.

The microprocessor rectifier is controlled with one button. The corresponding operating mode shows us an LED light shining on the upper surface of the rectifier. By pressing this button, we change the mode of operation of the rectifier:

CAR- microprocessor controlled battery charging program - Large batteries, maximum current load 12V - 8A

AGM - a program designed to charge AGM, Calcium and other batteries

MOTO - program designed for charging small batteries, current load - 1,5 A

REPAIR - program "repair of batteries discharged to zero". The device uses high and low frequency pulse technology in this mode, it has a good effect of repairing and activating a very heavily discharged battery. We use this function when charging batteries that are completely discharged or have been idle for a long time and cannot be charged with other rectifiers.

For 4Ah-10Ah batteries, we recommend using "repair mode" because the battery size is too small and the pulse charging is very good for small batteries.

On which all information regarding the operation of the rectifier and the state of charge of the battery are very clearly given.

passenger cars

motorcycles

yachts

agricultural and construction machinery

Golf carts

mowers

quads

Snowmobiles

Forklifts

tractors

1. Connect the red crocodile to the electrode

2. Connect the black crocodile to the electrode -

3. After properly connecting the rectifier - the battery parameters will appear on the display.

4. In case of incorrect connection, the following inscription will appear on the display: reverse conection - then you need to change the crocodile connections

5. Insert plug into 220 V power supply

6. Select the MODE type of rectifier operation

7. When charging is finished on the display, the battery is full 100%.

8. The charger can now remain connected to the battery at all times during the maintenance charge.

9. We disconnect the device in reverse order: first we pull the plug from the contact, then we disconnect the black crocodile, and finally the red one.

4 Ah - 1 hour

20 Ah - 3 hours

60 Ah - 10 hours

80 Ah - 15 hours

120 Ah - 20 hours

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With a VAT invoice
Parametry	Model	FOXSUR FBC 1206E Mikroprocesorowy
Parametry	Brand	Foxsur
Parametry	Maximum amperage	6 A
Parametry	Product weight with unit packaging	0.3 kg
Parametry	EAN (GTIN)	5904310264570
Parametry	Batteries included	no
Parametry	Packaging status	original