Akumuliatorių įkroviklis su LCD ekranu, 6V ir 12V, 2 lizdų

Trumpai apie prekę

Prekė: Akumuliatorių įkroviklis su LCD ekranu, 6V ir 12V, 2 lizdų. Kategorija: Baterijų įkrovikliai.

• Gamintojas: MW Power
• Modelis: MW-SC4B

MW-SC4B is a professional charger for lead-acid batteries with liquid electrolyte (WET), maintenance-free lead-acid batteries (MF), gel batteries (GEL), with a glass mass separator (AGM) with a nominal voltage of 6V and 12V.

Operation of the device is very simple and intuitive (instruction manual included).

Thanks to the high charging current, will quickly replenish the energy in the battery.

Instant battery connection is provided by the clamps included in the kit.

LCD display shows charging parameters on an ongoing basis.

The charger detects the battery status.

Long wires provide long range of connection of the device (from the input and output side after 1,5m).

SPECIFICATION:

• Input Voltage: 220-240V
• Output voltage (max): 7,2V and 14,7V
• Output current (selectable): 1A and 1A/4A
• Output Power: 70W
• Battery capacity supported: 1.2Ah-14Ah (6V) and 1.2Ah-120Ah (12V)
• Degree of protection: IP65
• Dimensions: 177 x 71 x 44mm (L x W x H)
• Weight: 0,5kg

Full specification in the technical data sheet attached to the offer.

Important information! Before starting the device, read the user manual.

Recovery mode - The process of regeneration of heavily discharged or sulphurized batteries by low current pulse charging - concerns restorative charging. This mode can be switched on manually or automatically (when the battery is deeply discharged).

CHARGING PHASES:

1. Initialization. Check the battery status to determine the appropriate charging mode. If the battery is deeply discharged, the device will start regenerative charging.

2. Low current charging. Starting low current charging to heat the battery before the constant current charging process.

3 - 6. Constant current charging. Maximum current charging up to about 85% capacity.

7. Constant charging voltage. Charging up to about 95% capacity with a gradual reduction in current to increase battery life.

8. Resting charging. Completion of the charging process. Getting the maximum possible battery capacity.

9. Analysis. Check that the battery maintains its capacity. At this stage, the charger can start the desulphurisation process for batteries in poor condition.

10. Maintenance. Monitoring the battery status. If the voltage falls below the threshold value, the charger will restart to keep the battery fully charged

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With a VAT invoice
Parametry	Model	MW-SC4B
Parametry	Brand	MW Power
Parametry	Maximum amperage	4 A
Parametry	Product weight with unit packaging	0.5 kg
Parametry	EAN (GTIN)	5902135136027
Parametry	Batteries included	no